Introduction
Thank you for choosing the Elac CL 82 Stereo Front Loudspeaker. This manual provides essential information for the proper setup, operation, and maintenance of your new loudspeakers. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
The Elac CL 82 is a passive stereo front loudspeaker designed to deliver high-fidelity audio. It features a robust construction and is engineered for clear and dynamic sound reproduction, suitable for various audio setups including home stereo systems and home theater front channels.
Safety Instructions
Always observe the following safety precautions to prevent damage to the loudspeakers or personal injury:
- Power: Ensure the amplifier or receiver connected to the loudspeakers is turned off before making any connections.
- Ventilation: Do not block any ventilation openings. Ensure adequate airflow around the speakers.
- Moisture: Do not expose the loudspeakers to water, moisture, or excessive humidity. The product is not waterproof.
- Heat: Keep the loudspeakers away from direct heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Placement: Place the loudspeakers on a stable, level surface to prevent them from falling.
- Cleaning: Disconnect the loudspeakers from the amplifier before cleaning. Use only a dry cloth.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Setup
1. Unpacking
Carefully remove the loudspeakers from their packaging. Retain the packaging materials for future transport or storage.
2. Placement
The Elac CL 82 loudspeakers are designed for shelf mounting. For optimal stereo imaging and sound quality, place the speakers equidistant from your primary listening position and ensure they are at ear level. Avoid placing them directly in corners, which can overemphasize bass frequencies.
Image: Front view of the Elac CL 82 loudspeaker, highlighting the distinct tweeter and woofer components. This image illustrates the speaker's design, crucial for understanding its acoustic properties and proper placement.
3. Connections
Connect the loudspeakers to your amplifier or receiver using high-quality speaker cables. Ensure correct polarity: connect the positive (+) terminal on the speaker to the positive (+) terminal on the amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on the amplifier. Incorrect polarity will result in poor sound quality and reduced bass response.
Image: Detailed view of the Elac CL 82 loudspeaker's drivers. This close-up shows the texture of the tweeter and the metallic sheen of the woofer, providing a visual reference for the speaker's components.
- Cable Gauge: Use appropriate gauge speaker wire for the length of your run. Thicker wire is recommended for longer distances.
- Secure Connections: Ensure all connections are tight and secure to prevent signal loss or short circuits.
Operating
Once properly connected, your Elac CL 82 loudspeakers are ready for use. They operate as passive speakers, meaning they require an external amplifier or receiver to function.
- Power On: Turn on your amplifier/receiver. Start with the volume at its lowest setting.
- Volume Control: Gradually increase the volume to your desired listening level. Avoid excessively high volumes that can cause distortion or damage to the speakers.
- Audio Source: Select your desired audio source (e.g., CD player, turntable, streaming device, computer, television). The CL 82 is compatible with various audio sources.
- Audio Mode: The CL 82 is designed for stereo audio output. Ensure your amplifier is set to a stereo or 2.0 channel configuration for optimal performance.
Maintenance
Proper care will ensure the longevity and continued performance of your Elac CL 82 loudspeakers.
Cleaning
To clean the cabinet, use a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by a dry one. Avoid using abrasive cleaners, solvents, or polishes, as these can damage the finish.
Image: The Elac CL 82 loudspeaker with its black protective grille in place, showcasing the complete cabinet design. This view is typical for general use and protection of the drivers.
The speaker grilles can be gently vacuumed to remove dust. If the grilles are removable, they can be carefully detached for cleaning the drivers underneath, but exercise caution to avoid damaging the speaker cones.
Image: Side perspective of the Elac CL 82 loudspeaker with the grille attached, providing a sense of its depth and cabinet construction. This angle is useful for understanding its physical footprint.
Storage
If storing the loudspeakers for an extended period, place them back in their original packaging if possible, and store them in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
If you experience issues with your Elac CL 82 loudspeakers, consult the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from one or both speakers | Loose or incorrect speaker cable connection; Amplifier/receiver not powered on or input not selected; Speaker protection circuit activated. | Check all speaker cable connections at both the speaker and amplifier ends, ensuring correct polarity. Verify amplifier is on and correct input is selected. Turn off amplifier, wait a few minutes, then turn back on. |
| Distorted or unclear sound | Volume too high; Loose connections; Damaged speaker cone; Amplifier clipping. | Reduce volume. Check all speaker cable connections. Inspect speaker cones for visible damage. Ensure amplifier power output matches speaker requirements. |
| Weak or no bass | Incorrect speaker polarity; Speakers placed too far from walls or corners. | Verify speaker cable polarity (+ to + and - to -). Experiment with speaker placement closer to walls (but not directly in corners) to enhance bass. |
If the problem persists after trying these solutions, please contact qualified service personnel.
Specifications
| Feature | Specification |
|---|---|
| Model Name | CL 82 |
| Manufacturer | Elac |
| Item Weight | 7.7 Kilograms |
| Power Source | Wired Electric |
| Wattage (Input) | 120 watts |
| Max. Output Power | 200 Watts |
| Audio Output Mode | Stereo |
| Mounting Type | Shelf Mount |
| Color | Natural Wood |
| Compatible Devices | Personal computer, Smartphone, Laptop, Tablet, Television, Projector |
| ASIN | B000187FMM |
| First Available Date | January 15, 2020 |
Warranty and Support
The Elac CL 82 loudspeaker comes with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions, including the duration and coverage details.
For technical support, service, or warranty claims, please contact Elac customer service or your authorized dealer. Keep your proof of purchase for warranty validation.
Note: Unauthorized repairs or modifications may void your warranty.
