ROBERTS 6-inch 110V Jamb Saw (Model 17076) Instruction Manual

Product Overview

The ROBERTS 6-inch 110V Jamb Saw, Model 17076, is a powerful and precise tool designed for professional and DIY flooring installations. It features a 5.8 Amp, 900-watt industrial-grade motor with ball and needle bearings, ensuring durability and smooth operation. This saw is specifically engineered to trim wood door jambs and baseboards, allowing for clean cuts in inside corners and under toe kicks.

The image above displays the ROBERTS 6-inch 110V Jamb Saw alongside its custom molded carrying case. The saw features a red motor housing, a gray gear housing, and a black handle. The blade guard is silver-colored, and the saw is equipped with a 6-inch carbide-tipped blade. The carrying case is light beige with the 'ROBERTS' logo and 'SUPER SIX 6" Jamb Saw 10-46' text visible on its surface.

• 6-inch jamb saw with 5-4/5-amp, 900-watt industrial grade motor featuring ball and needle bearings.
• Patented design cuts full inside corners in molding up to 1/2-Inch thick, undercut doors up to 1-3/4-inch.
• Adjustable cutting depth guide prevents cutting into plaster or wall board when trimming base boards.
• Precision height adjustment from flush to 1-1/16-inch, spiral ground gears for smooth, quiet operation.
• Includes custom molded carrying case and a 6-3/16-inch carbide-tipped blade.

Setup

Before initial use, ensure all packaging materials are removed and inspect the saw for any signs of damage. Familiarize yourself with all components, including the blade, depth adjustment mechanism, and safety features. Always ensure the saw is unplugged before making any adjustments or installing the blade.

Blade Installation

1. Ensure the saw is disconnected from the power source.
2. Locate the blade arbor and the blade retaining nut.
3. Carefully place the 6-3/16-inch carbide-tipped blade onto the arbor, ensuring the teeth are oriented correctly for cutting.
4. Secure the blade with the retaining nut, tightening it firmly using the provided wrench. Exercise caution to avoid contact with the blade teeth during this process.

Depth Adjustment

The saw features a precision height adjustment mechanism. Adjust the cutting depth from flush to 1-1/16 inches as required for your specific application. This adjustable guide helps prevent cutting into plaster or wallboard when trimming baseboards.

Operating Instructions

Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and gloves, when operating the jamb saw. Ensure your work area is clear and well-lit.

General Operation

• Connect the saw to a 110V, 60 Hz power outlet.
• Hold the saw firmly with both hands, maintaining a stable stance.
• Align the blade with the desired cutting line on the door jamb or baseboard.
• Engage the power switch and allow the blade to reach full speed (10,000 RPM) before beginning the cut.
• Slowly and steadily advance the saw through the material. Do not force the saw, as this can lead to kickback or damage to the tool.
• For optimal results when cutting baseboards, it is recommended to make multiple passes, lowering the blade slightly with each pass, rather than attempting a single deep cut.

Cutting Specific Areas

• Under Toe Kicks: The saw's design allows it to cut effectively under toe kicks, providing a clean finish for flooring installations.
• Inside Corners: The patented design enables the saw to cut full inside corners in molding up to 1/2-inch thick, and undercut doors up to 1-3/4-inch.

Maintenance

Regular maintenance is crucial for the longevity and safe operation of your ROBERTS Jamb Saw. Always unplug the tool before performing any maintenance.

• Blade Inspection: Regularly inspect the carbide-tipped blade for wear, damage, or missing teeth. A dull or damaged blade can affect cutting performance and safety. Replace the blade as needed with a genuine ROBERTS replacement blade.
• Cleaning: After each use, clean the saw to remove sawdust and debris. Use a dry cloth or compressed air. Do not use solvents or abrasive cleaners.
• Motor Vents: Ensure the motor vents are clear of obstructions to prevent overheating.
• Storage: Store the saw in its custom molded carrying case in a dry, secure location, out of reach of children.

Troubleshooting

If you encounter issues with your ROBERTS Jamb Saw, refer to the following common troubleshooting tips. For problems not listed here, contact customer support.

• Saw not powering on: Check the power cord for damage, ensure it is securely plugged into a working outlet, and verify the outlet has power.
• Blade not cutting effectively: The blade may be dull or damaged. Inspect the blade and replace it if necessary. Ensure the cutting depth is set correctly for the material.
• Excessive vibration or noise: This could indicate a loose blade, a damaged blade, or an internal issue. Disconnect power, check the blade's tightness, and inspect for damage. If the issue persists, seek professional service.
• Overheating: Ensure motor vents are clear. Avoid continuous heavy use without breaks. If the saw feels excessively hot, turn it off and allow it to cool down.

Specifications

Warranty Information

The ROBERTS 6-inch 110V Jamb Saw (Model 17076) comes with a one-year product warranty from the manufacturer. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and procedures, refer to the warranty documentation included with your product or contact ROBERTS customer support.

Customer Support

For technical assistance, replacement parts, or any inquiries regarding your ROBERTS 6-inch 110V Jamb Saw, please contact ROBERTS customer support. Always provide your product model number (17076) and a detailed description of your issue when seeking support.

You can typically find contact information for ROBERTS on their official website or within the product packaging. Keep this manual in a safe place for future reference.