Binatone BES460 EOC Master User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Binatone BES460 EOC Master. The BES460 is designed to extend network connectivity over existing coaxial cable infrastructure, integrating Ethernet, Wi-Fi, and CATV signals. Please read this manual carefully before using the device to ensure proper setup and optimal performance.

2. Product Overview

The Binatone BES460 EOC Master is a versatile networking device that combines multiple functionalities to provide robust connectivity. It features 4 LAN ports for wired connections, CATV RF IN and OUT ports for coaxial cable integration, and built-in Wi-Fi for wireless access.

Key features include:

• Connectivity: 4 LAN ports, CATV RF IN, CATV RF OUT, Wi-Fi (802.11 b/g/n).
• Compatibility: Adheres to IEEE HomePlug AV, 802.11 b/g/n, IEEE802.3, and IEEE802.3u standards.
• Protocol Support: Supports CSMA/CD, TCP/IP, PPPoE, DHCP, ICMP, and NAT protocols.
• Operating Modes: Can function in both bridging and routing modes.
• Management: Offers remote and web-based management interfaces.
• Advanced Networking: Supports virtual server, DMZ host, NAT/NAPT, PPPoE, Static IP, PPTP, and DHCP configurations.
• Security: Provides 128-bit WEP, WPA-PSK, and WPA2-PSK encryption for secure wireless communication.

Figure 1: Top view of the Binatone BES460 EOC Master. This compact grey unit features indicator lights on its front panel, signifying its operational status.

3. Setup Instructions

Follow these steps to set up your Binatone BES460 EOC Master:

1. Connect Coaxial Cable (Input): Connect the incoming CATV coaxial cable from your wall outlet to the CATV RF IN port on the BES460.
2. Connect Coaxial Cable (Output): If you wish to connect a TV or set-top box, connect a coaxial cable from the CATV RF OUT port on the BES460 to your TV or set-top box.
3. Connect Ethernet Devices: Use standard Ethernet cables to connect your computers, network switches, or other wired devices to any of the 4 LAN ports on the BES460.
4. Connect Power Adapter: Plug the provided power adapter into the power input port on the BES460, then plug the adapter into a standard electrical outlet.
5. Power On and Observe Indicators: The device will power on automatically. Allow a few moments for the device to boot up. Observe the indicator lights on the front panel. The power indicator should be solid, and other indicators (LAN, Wi-Fi, EOC) should illuminate as connections are established.
6. Access Web Management (Optional): To configure advanced settings, open a web browser on a connected computer and enter the default IP address (typically 192.168.1.1 or 192.168.0.1, refer to the label on the device or accompanying quick start guide for the exact IP and default login credentials).

4. Operating Instructions

Once the BES460 is set up, you can begin using its networking capabilities:

4.1. Wired Connectivity

Devices connected to the LAN ports will automatically obtain an IP address from the BES460 (if operating in routing mode with DHCP enabled) or from your main network (if in bridging mode).

4.2. Wireless Connectivity (Wi-Fi)

To connect to the Wi-Fi network:

1. On your wireless device (smartphone, laptop, tablet), search for available Wi-Fi networks.
2. Locate the network name (SSID) broadcast by the BES460 (e.g., "Binatone_BES460" or similar, check the device label).
3. Select the network and enter the Wi-Fi password (WPA/WPA2 key), also typically found on the device label.
4. Once connected, your device should have internet access.

4.3. Web Management Interface

The web management interface allows you to customize network settings. Access it by typing the device's IP address into a web browser. From here, you can:

• Change Wi-Fi SSID and password.
• Configure network mode (Bridging/Routing).
• Set up advanced features like Virtual Server, DMZ, and NAT.
• View connected devices and network status.
• Update firmware.

Always save changes after configuration and restart the device if prompted.

5. Maintenance

To ensure the longevity and optimal performance of your Binatone BES460 EOC Master, consider the following maintenance tips:

• Placement: Place the device in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate airflow around the unit.
• Cleaning: Periodically clean the exterior of the device with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials.
• Firmware Updates: Check the Binatone official website periodically for firmware updates. Keeping the firmware updated can improve performance, add new features, and enhance security. Follow the instructions provided with the firmware update carefully.
• Power Cycling: If you experience minor network issues, try power cycling the device by unplugging it from the power outlet for 10-15 seconds, then plugging it back in.

6. Troubleshooting

If you encounter problems with your Binatone BES460 EOC Master, refer to the following common issues and solutions:

If the problem persists after trying these solutions, please refer to the Warranty and Support section for further assistance.

7. Specifications

The following table details the technical specifications of the Binatone BES460 EOC Master:

8. Warranty and Support

The Binatone BES460 EOC Master comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use.

For warranty claims, technical support, or further assistance, please contact Binatone customer service. Details for contacting support can typically be found on the Binatone official website or on the product packaging.

Please retain your proof of purchase for warranty validation.