Auhagen 11362 Oberrittersgrun Station Modelling Kit User Manual

1. Introduction

This manual provides essential information and instructions for the assembly, care, and maintenance of your Auhagen 11362 Oberrittersgrun Station Modelling Kit. This kit is designed for experienced model builders and is not intended as a toy. Please read all instructions carefully before beginning assembly to ensure a successful and enjoyable building experience.

2. Safety Information

• This product contains small parts and is not suitable for children under 14 years of age due to choking hazards.
• Always use appropriate tools for model building, such as hobby knives and glues, with caution. Follow the safety instructions provided with these tools and materials.
• Work in a well-ventilated area when using adhesives or paints.
• Keep all components and tools out of reach of young children and pets.

3. What's in the Box

Upon opening your Auhagen 11362 Oberrittersgrun Station Modelling Kit, please verify that all components are present and undamaged. The kit typically includes:

• Ceramic pieces
• Paint
• Paint brushes
• Instruction booklet (detailed assembly guide)

If any parts are missing or damaged, please contact Auhagen customer support.

Image 1: Packaging for the Auhagen 11362 Oberrittersgrun Station Modelling Kit. The box displays the finished model and indicates dimensions of approximately 5.3 inches (13 cm) in height.

4. Setup and Assembly

The assembly of the Oberrittersgrun Station model requires careful attention to detail. Please follow the step-by-step instructions provided in the dedicated instruction booklet included with your kit.

4.1 Preparation

1. Workspace: Set up a clean, well-lit, and organized workspace. Protect your work surface from glue and paint.
2. Tools: Gather all necessary tools, which may include a hobby knife, cutting mat, tweezers, sanding sticks, and appropriate model adhesive (not included unless specified).
3. Review Instructions: Thoroughly read the entire instruction booklet before starting. Familiarize yourself with the parts and assembly sequence.

4.2 Assembly Steps

1. Part Identification: Carefully detach parts from their sprues or packaging. Use the instruction booklet's diagrams to identify each component.
2. Cleaning: Gently clean any mold lines or excess plastic from the parts using a hobby knife or sanding stick.
3. Test Fit: Before applying adhesive, always test fit parts to ensure proper alignment and fit.
4. Adhesion: Apply model adhesive sparingly according to the adhesive manufacturer's instructions. Hold parts firmly in place until the glue sets.
5. Painting: If desired, paint individual components before final assembly or paint the completed model. Refer to the instruction booklet for recommended colors and techniques.
6. Sequential Assembly: Follow the numbered steps in the instruction booklet precisely. Do not skip steps.

5. Display and Care

Once assembled, your Auhagen Oberrittersgrun Station model is a static display piece. Proper care will ensure its longevity and appearance.

• Display Location: Place the model on a stable, level surface away from direct sunlight, extreme temperatures, and high humidity.
• Handling: Handle the model carefully, avoiding pressure on delicate parts. Lift it from the base whenever possible.

6. Maintenance

Regular maintenance will keep your model looking its best.

• Dusting: Dust the model regularly with a soft, dry brush or a can of compressed air. Avoid using abrasive cloths or chemical cleaners.
• Cleaning: For stubborn dirt, lightly dampen a cotton swab with water (or a mild, model-safe cleaner if necessary) and gently wipe the affected area. Test any cleaner on an inconspicuous spot first.
• Storage: If storing the model, place it in a sturdy box with soft packing material to prevent damage.

7. Troubleshooting

Here are some common issues and their solutions during model assembly:

• Parts Not Fitting: Ensure parts are correctly oriented. Check for excess plastic or mold flash that may need to be trimmed. Gently sand edges if necessary.
• Weak Joints: Ensure sufficient adhesive is applied and allowed to cure fully. For stronger bonds, consider using a plastic cement that melts the plastic surfaces together.
• Missing Parts: Double-check the packaging and your workspace. If a part is genuinely missing, refer to the 'What's in the Box' section and contact Auhagen customer support.
• Paint Issues: Ensure surfaces are clean and dry before painting. Apply thin, even coats of paint to avoid brush marks or thick layers. Allow each coat to dry completely.

8. Specifications

9. Warranty and Support

Auhagen products are manufactured to high-quality standards. For information regarding warranty coverage or technical support, please refer to the contact details provided in the kit's instruction booklet or visit the official Auhagen website. Please retain your proof of purchase for any warranty claims.