1. Introduction
This manual provides instructions for the safe installation, operation, and maintenance of your Progress Lighting P5604-30 Outdoor Wall Sconce. This fixture features a durable powder-coated finish and a white 6-inch glass globe, designed for outdoor use. Please read these instructions thoroughly before beginning installation and retain them for future reference.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Use only UL/cUL listed wire connectors.
- This fixture is designed for outdoor use. Ensure all connections are properly sealed to prevent water intrusion.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Verify that all components are present before beginning installation:
- P5604-30 Outdoor Wall Sconce (Fixture with Glass Globe)
- Installation Sheet
Figure 1: Front view of the Progress Lighting P5604-30 outdoor wall sconce with a white powder-coated finish and a 6-inch white glass globe.
4. Specifications
| Specification | Detail |
|---|---|
| Model Number | P5604-30 |
| Dimensions (Fixture) | 6-Inch Width x 8-1/2-Inch Height (approx. 7 x 7 x 9 inches overall) |
| Material | Plastic housing, Glass shade |
| Finish | Powder-Coated White |
| Voltage | 120 Volts |
| Wattage (Max) | 100 watts |
| Bulb Base | E26 (Medium Base) |
| Light Source Type | Incandescent (compatible with LED/CFL) |
| Installation Type | Surface Mount |
| Indoor/Outdoor Usage | Outdoor |
| Item Weight | 1.5 Pounds |
Figure 2: Technical line drawing illustrating the dimensions and components of the P5604-30 outdoor wall sconce.
5. Installation Instructions
Tools Required (Not Included): Screwdriver, wire strippers, electrical tape, safety glasses.
- Prepare for Installation: Before starting, ensure the power to the junction box is turned OFF at the circuit breaker or fuse box.
- Mounting Bracket Installation: Attach the mounting bracket (if separate from the fixture) to the junction box using the provided screws. Ensure it is securely fastened.
- Wiring: Connect the fixture's wires to the house electrical wires according to the included installation sheet. Typically, this involves connecting:
- Black (Live) fixture wire to Black (Live) house wire.
- White (Neutral) fixture wire to White (Neutral) house wire.
- Green or Bare Copper (Ground) fixture wire to Green or Bare Copper (Ground) house wire.
- Fixture Mounting: Carefully align the fixture with the mounting bracket and secure it using the provided screws or nuts. Ensure the fixture is flush against the mounting surface.
- Glass Globe Installation: Unscrew the retaining ring from the fixture base. Place the white glass globe over the socket and secure it with the retaining ring, ensuring it is hand-tightened to prevent movement.
- Bulb Installation: Insert one E26 medium base bulb (max 100W, not included) into the socket. Do not overtighten.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker.
Placement Guidelines
Consider the following recommendations for optimal aesthetic and functional placement of your outdoor wall sconce:
Figure 3: Illustration demonstrating appropriate sizing and placement of outdoor wall lanterns next to an entry door, suggesting a fixture height of 1/4 the door height (e.g., 24-inch fixture for a 96-inch door).
Figure 4: Illustration demonstrating appropriate sizing and placement of outdoor wall lanterns relative to a garage door, suggesting a 24-inch tall fixture for a 16-foot door width.
6. Operating Instructions
The Progress Lighting P5604-30 Outdoor Wall Sconce operates via a standard wall switch connected to its electrical circuit. Once installed and power is restored, simply use the wall switch to turn the light fixture on or off.
Bulb Replacement
- Disconnect Power: Always turn off power to the fixture at the circuit breaker before replacing the bulb.
- Remove Glass Globe: Carefully unscrew the retaining ring and remove the glass globe.
- Replace Bulb: Allow the old bulb to cool completely before unscrewing it. Insert a new E26 medium base bulb (max 100W).
- Reassemble: Replace the glass globe and secure it with the retaining ring.
- Restore Power: Turn power back on at the circuit breaker.
7. Maintenance
- Cleaning: To clean the fixture, ensure power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Inspection: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | 1. Power is off 2. Loose wiring connection 3. Faulty bulb 4. Faulty wall switch | 1. Check circuit breaker/fuse. 2. Verify all wire connections are secure (with power off). 3. Replace bulb. 4. Test or replace wall switch. |
| Light flickers | 1. Loose bulb 2. Loose wiring connection 3. Incorrect bulb type | 1. Tighten bulb. 2. Check wiring connections (with power off). 3. Ensure bulb is compatible with fixture. |
9. Warranty and Support
This Progress Lighting P5604-30 Outdoor Wall Sconce is covered by a 1-year limited warranty from the date of purchase. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support.
For warranty claims, technical assistance, or replacement parts, please contact Progress Lighting customer service. Refer to your purchase documentation or the official Progress Lighting website for current contact information.
Please retain your proof of purchase for warranty validation.
