Intex 57422NP
Intex Kiddie Pool - Summer Sunset Glow Design User Manual
Model: 57422NP
Product Overview
The Intex Sunset Glow Kiddie Pool is designed for young children to enjoy water play. It features a durable vinyl construction with three colorful inflatable rings and a soft inflatable floor for comfort. This pool is suitable for outdoor use and provides a safe environment for supervised water activities.
Image: The Intex Sunset Glow Kiddie Pool, showcasing its vibrant pink, yellow, and blue rings and soft inflatable bottom.
Image: Two children and an adult enjoying the Intex Kiddie Pool in a grassy outdoor setting, demonstrating its use.
Safety Information
WARNING: This is not a life-saving device. Children should always be supervised by a competent adult when in or near the pool. Drowning can occur quickly and silently. Empty the pool after each use.
- Recommended age: 3 years and up.
- Do not install the paddling pool over concrete, asphalt, or any other hard surface.
- Place the pool on a level surface, free of sharp objects and debris.
- Keep children within arm's reach.
- Ensure the pool is completely deflated and stored away when not in use to prevent water accumulation and potential hazards.
Image: Top-down view of the Intex Kiddie Pool, showing the warning labels printed on the side rings, emphasizing safety precautions.
Setup Instructions
- Unpack and Inspect: Carefully remove the pool from its packaging. Inspect the pool for any signs of damage or punctures.
- Choose a Location: Select a flat, level, and clear area in your yard, away from sharp objects, steep slopes, or structures. Ensure the ground is soft, such as grass or sand.
- Inflate the Pool:
- Locate the inflation valves on each of the three rings and the inflatable bottom.
- Use a hand or foot pump (not included) to inflate each section. Inflate until firm to the touch but not overinflated. Overinflation can cause damage.
- Ensure all valves are securely closed after inflation.
Image: A close-up view of the inflation valves located on the colorful rings of the Intex Kiddie Pool, indicating where to inflate each section.
Image: A detailed view of the soft, inflatable honeycomb-patterned floor of the pool, designed for comfort.
Operating Instructions
- Filling the Pool:
- Using a garden hose, slowly fill the pool with water.
- Fill to a maximum water height of 9.5 inches (24 cm). Do not overfill.
- Supervision: Always ensure constant, active adult supervision when children are in or around the pool. Never leave children unattended.
- Water Play: Encourage safe and fun water play. Remind children not to dive or jump into the pool.
Image: A close-up of children's legs splashing in the Intex Kiddie Pool, illustrating the water level during use.
Maintenance
- Draining the Pool:
- To drain, gently press down on one side of the pool to allow water to flow out.
- Ensure water drains away from structures, electrical outlets, and other sensitive areas.
- Cleaning:
- After draining, wipe down the interior and exterior surfaces with a soft cloth and mild soap solution.
- Rinse thoroughly with clean water.
- Allow the pool to air dry completely before deflating and storing.
- Storage:
- Once dry, open all inflation valves and gently press out the air from each section.
- Fold the pool neatly and store it in a cool, dry place, away from direct sunlight and extreme temperatures.
- Keep away from pests and sharp objects.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pool loses air quickly. | Puncture or loose valve cap. | Check all valve caps for tightness. Locate the puncture (can use soapy water to find bubbles) and use the included repair patch. Ensure the area is clean and dry before applying the patch. |
| Pool does not hold shape. | Under-inflated sections or uneven ground. | Ensure all sections are adequately inflated. Relocate the pool to a completely flat and level surface. |
| Water becomes dirty quickly. | Debris from surroundings or infrequent water changes. | Change water frequently, especially after heavy use. Cover the pool when not in use to prevent debris from entering. |
A repair patch is included with your pool for minor punctures. For larger damages, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 57422NP |
| Dimensions (Inflated) | 58 inches (147 cm) diameter x 13 inches (33 cm) height |
| Material | Durable Vinyl (PVC) |
| Water Capacity (9.5 in / 24 cm height) | 73 Gallons (276 Liters) |
| Recommended Age | 3 years and up |
| Item Weight | 3.49 pounds (1.58 kg) |
| Manufacturer | Intex Industries (Xiamen) Co., Ltd. |
Image: A diagram illustrating the dimensions of the Intex Kiddie Pool, showing a diameter of 58 inches and a height of 13 inches.
What's in the Box
- Intex Sunset Glow Kiddie Pool Body
- Repair Patch
Image: The retail packaging for the Intex Sunset Glow Kiddie Pool, indicating the contents and branding.
Warranty and Support
Intex products are manufactured with high-quality materials and workmanship. While specific warranty details may vary by region and retailer, Intex generally provides a limited warranty against manufacturing defects. Please retain your purchase receipt as proof of purchase.
For product support, missing parts, or warranty claims, please visit the official Intex website or contact their customer service department. Contact information can typically be found on the product packaging or the Intex website.
For more information, visit the Intex Store on Amazon.
Related documents57422NP
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.