NANAO FlexScan L767-R User Manual

1. Introduction

Thank you for purchasing the NANAO FlexScan L767-R 19-inch Color LCD Display. This manual provides essential information for setting up, operating, and maintaining your monitor. Please read this manual thoroughly before use to ensure proper and safe operation.

Figure 1: NANAO FlexScan L767-R LCD Monitor. This image shows the monitor from a slight angle, highlighting its slim bezel and adjustable stand.

2. Features

The FlexScan L767-R is designed for optimal visual performance and user convenience. Key features include:

• Vibrant Color Display: Supports approximately 16.77 million full colors for impressive color vibrancy.
• FineContrast Function: Easily adjust brightness and gamma settings to match content (text, images) for optimal viewing.
• Dual Input Support: Equipped with both analog and digital input terminals for versatile connectivity.
• Integrated Audio: Features built-in speakers for audio output.
• Ergonomic Stand: The stand allows for a 50mm vertical height adjustment, enhancing user comfort.
• Non-Glare Surface: The screen surface is non-glare, reducing reflections and eye strain.

3. Setup

Follow these steps to set up your FlexScan L767-R monitor:

1. Unpack the Monitor: Carefully remove the monitor and all accessories from the packaging.
2. Position the Monitor: Place the monitor on a stable, flat surface. Ensure adequate ventilation around the monitor.
3. Connect Video Cable:
   • For Analog Connection: Connect the D-Sub (VGA) cable from your computer's video output to the analog input port on the monitor.
   • For Digital Connection: Connect the DVI cable from your computer's video output to the digital input port on the monitor.
4. Connect Audio Cable (Optional): If you wish to use the built-in speakers, connect an audio cable from your computer's audio output to the audio input port on the monitor.
5. Connect Power Cable: Plug the power cable into the monitor's power input, then plug the other end into a grounded electrical outlet.
6. Power On: Press the power button on the monitor. Power on your computer. The monitor should display your computer's screen.

4. Operating

This section describes the basic operation of your FlexScan L767-R monitor.

4.1. FineContrast Function

The FineContrast function allows you to quickly switch between different display modes optimized for various content types. Use the dedicated buttons on the monitor's front panel to cycle through modes such as Text, Picture, Movie, and Custom. Each mode adjusts brightness, gamma, and color temperature for the best viewing experience.

4.2. Stand Adjustment

The monitor stand offers vertical height adjustment. Gently push or pull the monitor panel up or down to adjust its height within the 50mm range. Ensure the monitor is stable after adjustment.

4.3. On-Screen Display (OSD) Menu

Access the OSD menu using the control buttons on the front panel to fine-tune settings such as brightness, contrast, color balance, input selection, and more. Refer to the detailed OSD menu guide in the full manual for comprehensive options.

5. Maintenance

Proper maintenance ensures the longevity and performance of your monitor.

• Cleaning the Screen: Use a soft, lint-free cloth slightly dampened with water or a non-abrasive, monitor-specific cleaning solution. Do not spray liquid directly onto the screen.
• Cleaning the Casing: Wipe the monitor casing with a soft, dry cloth. Avoid using strong detergents or solvents.
• Ventilation: Ensure the ventilation openings on the monitor are not blocked to prevent overheating.
• Power Off: Always turn off the monitor and unplug it from the power outlet before cleaning or if it will be unused for an extended period.

6. Troubleshooting

If you encounter issues with your monitor, refer to the following common problems and solutions:

• No Image on Screen:
  • Check if the monitor is powered on.
  • Verify that the video cable is securely connected to both the monitor and the computer.
  • Ensure the correct input source is selected on the monitor (Analog/Digital).
• Image is Distorted or Blurry:
  • For analog connections, perform an auto-adjustment via the OSD menu.
  • Check the display resolution settings on your computer. Ensure it matches the monitor's native resolution (1280x1024).
• No Sound from Speakers:
  • Verify the audio cable is properly connected.
  • Check the volume settings on both the monitor and your computer.

If the problem persists after trying these solutions, please contact EIZO customer support or refer to the comprehensive troubleshooting guide in the full product manual.

7. Specifications

8. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official EIZO website. Warranty terms and conditions may vary by region.

For technical support, product inquiries, or service requests, please contact EIZO customer support through their official channels. Keep your product model number (L767-R) and serial number ready when contacting support.

EIZO Official Website: www.eizo.com