HP iPAQ Micro Keyboard User Manual

1. Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your HP iPAQ Micro Keyboard. Designed for compatibility with HP iPAQ H4100 and H2200 series Pocket PCs, this accessory enhances typing efficiency and portability.

2. Package Contents

Verify that your package contains the following item:

• HP iPAQ Micro Keyboard

3. Setup

3.1 Attaching the Keyboard

To attach the Micro Keyboard to your iPAQ Pocket PC:

1. Align the keyboard's connector with the port at the bottom of your iPAQ H4100 or H2200 series device.
2. Gently push the keyboard onto the iPAQ until it securely clicks into place. Ensure a firm connection to prevent accidental detachment.
3. If using an extended battery, you may need to adjust or replace the plastic clip on the keyboard to accommodate the larger battery size. Exercise caution during this process to avoid damage.

This image illustrates the HP iPAQ Pocket PC with the Micro Keyboard securely attached to its base. The keyboard features a QWERTY layout with small, circular keys. The iPAQ's screen shows a typical operating system interface.

3.2 Software Installation

For the iPAQ to recognize the Micro Keyboard, specific software may be required. If the keyboard is not immediately functional upon attachment:

1. Visit the official HP support website for your iPAQ H4100 or H2200 series Pocket PC.
2. Locate and download the appropriate keyboard driver or accessory software for your device model.
3. Follow the on-screen instructions to install the software on your iPAQ. Once installed, the iPAQ should recognize the keyboard without further issues.

4. Operating the Keyboard

4.1 Basic Typing

The Micro Keyboard features a standard QWERTY layout, allowing for comfortable and efficient text input. Its ergonomic design facilitates two-thumb typing, enabling quick data entry even on the go.

4.2 Special Functions and Keys

The keyboard may include special function keys or key combinations for accessing specific iPAQ features. Refer to your iPAQ's operating system documentation for details on these functions. Some applications, such as emulators, may allow mapping of keyboard buttons to in-app controls.

5. Maintenance

5.1 Cleaning

To maintain the keyboard's functionality and appearance:

• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the surface.
• Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the keyboard.
• Use compressed air to remove dust and debris from between the keys.

5.2 Storage

When not in use, store the keyboard in a clean, dry environment away from extreme temperatures and direct sunlight. Detaching it from the iPAQ when not needed can help preserve both devices.

6. Troubleshooting

• Keyboard Not Recognized: Ensure the keyboard is securely attached to the iPAQ. Verify that the necessary software drivers are installed on your iPAQ. Restarting the iPAQ may also resolve the issue.
• Keys Not Responding: Check for any physical obstructions or debris under the keys. Clean the keyboard as described in the Maintenance section. If the issue persists, the keyboard may require service.
• Difficulty Attaching/Detaching: Ensure correct alignment. If using an extended battery, confirm the correct plastic clip is in place. Avoid forcing the attachment or detachment to prevent damage to the connectors or clips.
• Compatibility Issues: This keyboard is specifically designed for HP iPAQ H4100 and H2200 series Pocket PCs. It may not be compatible with other models or devices.

7. Specifications

8. Warranty Information

The HP iPAQ Micro Keyboard comes with a one-year limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Hewlett Packard support website.

9. Support

For further assistance, technical support, or to inquire about replacement parts, please visit the official Hewlett Packard support website or contact their customer service department. Ensure you have your product model number (FA162A) available when seeking support.