Introduction
This manual provides instructions for the proper installation, operation, and maintenance of the Toro Lawn-Boy Side Bag Kit, model #89817. This accessory is designed to collect grass clippings during lawn mowing, enhancing the cleanliness of your lawn. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
Safety Information
Always prioritize safety when operating lawn care equipment. Refer to your lawn mower's instruction manual for specific safety guidelines. Ensure the mower engine is off and the spark plug wire is disconnected before performing any installation or maintenance on the side bag kit.
- Wear appropriate personal protective equipment (PPE), such as gloves and eye protection.
- Ensure all components are securely fastened before operating the mower.
- Do not operate the mower with a damaged or improperly installed bag.
Package Contents
Verify that all parts are present before beginning installation:
- 1.6 Bushel Capacity Fabric Bag
- Mounting Frame/Hardware (specific components may vary)
- Instruction Sheet
Setup and Installation
Follow these steps to properly install the side bag kit onto your compatible Lawn-Boy mower:
- Prepare the Mower: Ensure the lawn mower engine is turned off, the spark plug wire is disconnected, and the mower is on a flat, stable surface.
- Locate Discharge Chute: Identify the side discharge chute opening on your lawn mower deck.
- Assemble Frame (if necessary): If the mounting frame requires assembly, follow the included frame-specific instructions to connect its components.
- Attach Fabric Bag to Frame: Securely attach the fabric bag to the mounting frame. Ensure the bag opening aligns correctly with the frame's collection area.
- Mount Kit to Mower: Position the assembled bag and frame over the mower's side discharge chute. Secure the frame to the mower deck using the provided hardware (e.g., clips, bolts, or hooks). Ensure a tight fit to prevent grass clippings from escaping.
- Verify Security: Gently tug on the installed bag kit to confirm it is firmly attached and will not dislodge during operation.
Operating Instructions
Once the side bag kit is installed, operate your lawn mower as usual. The bag will collect grass clippings as you mow.
- Monitor Bag Fill Level: Periodically check the bag's fill level. A full bag will reduce collection efficiency and may cause clippings to clog the discharge chute.
- Emptying the Bag: When the bag is full, turn off the mower engine and disconnect the spark plug wire. Carefully remove the bag kit from the mower. Unzip or unclip the bag to empty the clippings into a compost pile or waste receptacle. Reattach the bag kit securely before resuming mowing.
- Optimal Performance: For best results, mow when grass is dry. Wet grass can clog the bag and chute more easily.
Maintenance
Regular maintenance ensures the longevity and effectiveness of your side bag kit.
- Cleaning: After each use, or as needed, remove grass clippings and debris from the bag and frame. The fabric bag can be rinsed with water and allowed to air dry completely before storage to prevent mold and mildew.
- Inspection: Periodically inspect the fabric bag for tears or holes. Check the mounting frame for bends, cracks, or loose fasteners. Replace any damaged components immediately.
- Storage: Store the side bag kit in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bag not collecting clippings efficiently | Bag is full; discharge chute is clogged; wet grass; mower blade dull. | Empty bag; clear chute; mow when grass is dry; sharpen or replace blade. |
| Bag kit detaches during operation | Improper installation; loose fasteners; damaged frame. | Reinstall securely; tighten all fasteners; inspect and replace damaged parts. |
| Excessive dust/debris from bag | Bag fabric worn or damaged; extremely dry conditions. | Inspect bag for damage and replace if necessary. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | #89817 |
| Brand | Toro (Lawn-Boy) |
| Capacity | 1.6 Bushels |
| Product Dimensions | 11.4 x 9.7 x 24.4 inches |
| Item Weight | 0.01 ounces |
| Manufacturer | LAWNBOY PARTS AND ACCESSORIES |
| ASIN | B0000CBHWV |
Warranty Information
This product is covered by the manufacturer's limited warranty. For specific details regarding warranty coverage, duration, and claims procedures, please refer to the warranty card included with your purchase or visit the official Toro website. Keep your proof of purchase for warranty validation.
Customer Support
If you have questions, require assistance with installation, or need to troubleshoot issues not covered in this manual, please contact Toro customer support. Contact information can typically be found on the manufacturer's website or on the product packaging.
- Online Resources: Visit the official Toro website for FAQs, product registration, and additional support documents.
- Authorized Service Centers: For repairs or parts replacement, locate an authorized Toro service center near you.
