1. Introduction and Overview
The GBC Ultima 65 Thermal Roll Laminator is designed to provide high-quality lamination for a variety of documents. Ideal for educational and office environments, this machine offers a wide 27-inch laminating width and features an AutoSpeed function for optimal results. It is compatible with EZ Load Gray Cap NAP I Film and standard NAP I roll film up to 3 mil thickness. Key features include quick warm-up, easy film loading, and integrated safety mechanisms.

Figure 1: Front view of the GBC Ultima 65 Thermal Roll Laminator.
2. Setup Instructions
2.1 Unpacking and Placement
- Carefully remove the laminator from its packaging.
- Place the laminator on a stable, flat surface with adequate space around it for operation and ventilation.
- Ensure the power cord is accessible and can reach a grounded electrical outlet.
2.2 Film Loading
The GBC Ultima 65 supports both EZ Load Gray Cap NAP I Film and standard 1-inch core NAP I film up to 3 mil. The EZ Load system features color-coded end caps to simplify correct film installation.
- Open the pivoting table to access the rollers.
- For EZ Load film, match the color-coded end caps of the film roll with the corresponding color on the laminator's shafts.
- For standard film, use the AutoGrip shafts to easily remove and add film rolls.
- Thread the film through the laminator according to the diagrams on the machine or in the detailed manual.

Figure 2: Close-up of the EZ Load Simplified Film Loading mechanism.

Figure 3: The pivoting table provides easy access to the laminator's rollers for film loading.
Video 1: Demonstrates the simplified film loading process for the GBC Ultima 65 Laminator.
3. Operating Instructions
3.1 Power On and Warm-Up
- Plug the laminator into a grounded electrical outlet.
- Press the power button. The machine will begin to warm up, typically in less than 10 minutes.
- Wait for the 'Ready' indicator light to illuminate, signaling that the laminator has reached the optimal operating temperature.
3.2 Laminating Documents
The AutoSpeed feature automatically selects the optimal speed for your documents, ensuring high-quality lamination.
- Place your document(s) on the feed tray, ensuring they are aligned with the alignment guides.
- Gently feed the document into the laminator. The AutoSpeed feature will adjust the speed as needed.
- Use the front and back stop buttons to pause lamination for precise loading or cutting if necessary.
- Once laminated, the document will exit the rear of the machine. Allow it to cool on a flat surface.

Figure 4: The easy alignment guide helps ensure documents are fed straight into the laminator.

Figure 5: A user demonstrating the lamination process with the GBC Ultima 65.
3.3 Using the Built-in Trimmer
The laminator includes a built-in trimmer for quickly cutting completed documents.
- After lamination, position the document under the trimmer blade.
- Carefully slide the trimmer to cut the excess film, ensuring a clean edge.

Figure 6: The integrated film trimmer allows for precise cutting of laminated documents.
Video 2: Overview of the GBC Ultima 65 Thermal Roll Laminator, including its features and operation.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your GBC Ultima 65 laminator.
- Cleaning: Periodically wipe down the exterior of the machine with a soft, dry cloth. Ensure the machine is unplugged and cool before cleaning.
- Roller Care: Keep the rollers free from adhesive residue. If residue builds up, consult the full product manual for specific cleaning instructions or contact customer support.
- Storage: When not in use, store the laminator in a clean, dry environment.

Figure 7: The laminator with its protective cover open, showing internal components for inspection or maintenance.
5. Troubleshooting
If you encounter issues with your laminator, refer to the following common troubleshooting tips.
- Film Jams: If a document jams, use the slow forward and reverse function to carefully extract it. Avoid pulling forcefully, which can damage the rollers.
- Wavy Lamination: Ensure the correct film thickness setting is selected. Allow the machine to fully warm up before use. If the issue persists, check for proper film loading and tension.
- Machine Not Heating: Verify the power cord is securely plugged in and the power button is on. If the 'Ready' light does not illuminate after the warm-up period, contact customer support.
- Auto Shut-off: The machine enters standby mode after 2 hours of inactivity and shuts off completely after 3 hours for safety and energy saving. This is normal operation.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | GBC |
| Model Number | 1710740 |
| Maximum Laminating Width | 27 inches |
| Warm-Up Time | Less than 10 minutes |
| Compatible Film Types | EZ Load Gray Cap NAP I Film, Standard 1" core NAP I film (up to 3 mil) |
| Features | AutoSpeed, Pivoting Table, AutoGrip Shafts, Front/Back Stop Buttons, Footage Counter, Alignment Guides, Built-in Trimmer, Protective Shield, Auto Shut-off |
| Item Weight | 116 pounds |
| Product Dimensions | 21 x 35 x 14 inches |
| Color | Gray |
7. Warranty and Support
For warranty information, technical support, or service inquiries, please contact GBC customer service. Refer to the product packaging or the official GBC website for the most up-to-date contact details.
- Manufacturer: ACCO BRANDS, INC.
- Customer Support: Refer to the official GBC website or product documentation for contact information.