Nikon 70-200mm f/2.8G ED-IF AF-S VR Zoom Nikkor Lens Instruction Manual

Introduction

The Nikon 70-200mm f/2.8G ED-IF AF-S VR Zoom Nikkor Lens is a versatile telephoto zoom lens designed for Nikon Digital SLR Cameras. It offers a constant maximum aperture of f/2.8 across its entire focal range, making it ideal for various photography scenarios including portraits, sports, wildlife, and events. This lens incorporates Nikon's advanced technologies to deliver superior optical performance, fast and quiet autofocus, and effective image stabilization.

Key features include:

• Compact, lightweight G-type fast 2.9x telephoto zoom with Vibration Reduction.
• VR operation offers the equivalent of using a shutter speed 3 stops (eight times) faster.
• Holds fast and constant f2.8 maximum aperture through the entire focal range.
• Built-in Single Wave Motor for ultra-fast, ultra-quiet AF operation.
• Five ED glass elements for higher optical performance.

Setup

Attaching and Detaching the Lens

To attach the lens, align the mounting index on the lens barrel with the mounting index on your Nikon camera body and rotate the lens clockwise until it clicks into place. To detach, press the lens release button on the camera body while rotating the lens counter-clockwise.

Tripod Mounting Collar

The lens comes with a detachable tripod mounting collar. This collar allows for better balance when mounting the lens and camera on a tripod, especially given the lens's weight. To remove the tripod collar, locate the screw on the collar, loosen it, and press the release button to slide the collar off. Remember to re-attach it securely if you plan to use a tripod.

Lens Hood (HB-29)

The bayonet hood HB-29 is provided to reduce flare and ghosting caused by stray light entering the lens. To attach, align the hood with the lens and rotate until it locks. To detach, press the release button and rotate. While useful outdoors, some users may opt not to use it indoors or in certain situations.

Operating the Lens

Autofocus (AF-S) and Manual Focus (M/A Mode)

The lens features a Silent Wave Motor (SWM) for ultra-fast, ultra-quiet autofocus operation. The M/A mode allows instant switching from autofocus to manual operation with virtually no lag time, even during AF servo operation, regardless of the AF mode in use. This provides flexibility for precise focusing adjustments.

Vibration Reduction (VR)

Nikon's Vibration Reduction (VR) technology minimizes image blur caused by camera shake, offering the equivalent of shooting at a shutter speed three stops (eight times) faster. This is particularly beneficial for handheld shooting in low-light conditions or at slower shutter speeds. The lens's VR system also automatically detects panning, eliminating the need for a special mode. VR operation is compatible with Nikon F6, F5, F100, F80, F75, F65, D2-series, D1-series, D100, D70-series, and D50 cameras.

Important: Remember to turn off VR if you are mounting the lens on a tripod to prevent potential image degradation.

Aperture Control (G-type Nikkor)

As a G-type Nikkor lens, it does not have an aperture ring. The aperture should be selected directly from your compatible Nikon AF SLR camera body. This design enables advanced features like 3D Matrix Metering and 3D Multi-Sensor Balanced Fill-Flash by relaying subject-to-camera distance information to the camera body.

Maintenance

To ensure the longevity and optimal performance of your Nikon 70-200mm f/2.8G ED-IF AF-S VR Zoom Nikkor Lens, follow these maintenance guidelines:

• Keep the lens caps on when not in use to protect the front and rear elements from dust and scratches.
• Clean lens surfaces with a soft, lint-free cloth specifically designed for optical lenses. Use a blower brush to remove dust before wiping.
• Avoid touching the glass elements with your fingers.
• Store the lens in a dry, cool place, away from direct sunlight and extreme temperatures.
• The lens is protected by a dust and waterproof rubber sealing mount, but avoid exposing it to excessive moisture or harsh conditions.

Troubleshooting

If you encounter any issues with your lens, consider the following common troubleshooting steps:

• Autofocus not working: Ensure the lens is set to AF-S or M/A mode and that your camera body's autofocus settings are correctly configured. Check for any obstructions on the lens contacts.
• Blurry images: Verify that Vibration Reduction (VR) is enabled for handheld shooting and disabled when using a tripod. Check your camera's shutter speed and aperture settings. Ensure the lens is clean.
• Lens not mounting: Ensure the lens and camera body mounting indexes are correctly aligned and that no debris is obstructing the mount. Do not force the lens.
• Unusual noises: If you hear unusual noises during operation, especially from the Silent Wave Motor, discontinue use and consult a qualified service technician.

For persistent issues, refer to your camera's instruction manual or contact Nikon customer support.

Specifications

Warranty and Support

This Nikon lens is backed by Nikon's manufacturer warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Nikon website. For technical support, service, or repair inquiries, please contact Nikon customer service.

If purchased through Amazon, standard Amazon return policies may apply. Please check your purchase details for eligibility.

Product Images

Image: The Nikon 70-200mm f/2.8G ED-IF AF-S VR Zoom Nikkor Lens, showcasing its robust black barrel and control rings.

Additional Product Videos