Introduction
The Logitech USB Vantage Headset is designed to provide clear audio and voice communication for gaming on PlayStation 2 and PlayStation 3 consoles. It features a digital USB audio processor, a noise-canceling microphone, and an adjustable headband for comfort during extended use. The headset is compatible with games that support Logitech USB headsets.
Package Contents
- Logitech USB Vantage Headset (with integrated 10-foot cord)
- Three sets of interchangeable earpads (velvet, leatherette, and foam)
Setup
Connecting the Headset
Image description: A Logitech USB Vantage Headset shown from the side, highlighting the adjustable headband, earcups, and the flexible microphone boom. The USB connector is visible at the end of the cable.
- Locate an available USB port on your PlayStation 2 or PlayStation 3 console.
- Insert the USB connector of the Logitech USB Vantage Headset firmly into the USB port.
- Ensure the headset is securely connected. The console should recognize the new audio device automatically.
Game Compatibility
- The Logitech USB Vantage Headset requires games that specifically support Logitech USB headsets for full functionality, including voice chat and command recognition. Refer to your game's instruction manual or in-game settings for compatibility information.
Operating Instructions
Adjusting the Headband
- Gently slide the earcups up or down along the headband until they rest comfortably over your ears. The headband is designed to provide a secure yet comfortable fit for various head sizes.
Using the Noise-Canceling Microphone
- Position the flexible microphone boom approximately one inch (2.5 cm) from your mouth. The integrated noise-canceling feature helps to reduce ambient background noise, ensuring clearer voice transmission during gameplay.
Changing Earpads
- To change earpads, gently peel off the current earpad from the earcup.
- Select your preferred earpad material (velvet for breathability, leatherette for sound isolation, or foam for a soft feel).
- Align the new earpad with the earcup and carefully stretch its elastic rim around the earcup's edge until it is securely attached.
Volume Control
- Adjust the audio output level using the in-line volume control located on the headset cord. Additionally, you may need to adjust the master volume settings within your PlayStation console's system menu or the specific game's audio options.
Maintenance
Cleaning
- Wipe the headset surfaces, including the earcups and headband, with a soft, slightly damp cloth.
- Do not use harsh chemical cleaners, abrasive materials, or solvents, as these can damage the headset's finish and components.
- For earpads, if removable, follow any specific cleaning instructions provided with the material. Ensure they are completely dry before reattaching.
Storage
- Store the headset in a clean, dry environment away from direct sunlight, extreme temperatures, and excessive humidity.
- Avoid tightly wrapping the 10-foot cord around the headset to prevent kinks or damage to the internal wiring.
Troubleshooting
No Sound from Headset
- Check USB Connection: Ensure the USB connector is fully inserted into an active USB port on your PlayStation console. Try a different USB port if available.
- Verify Console Audio Settings: Navigate to your PlayStation console's audio settings and confirm that the USB headset is selected as the primary audio output device.
- Adjust Headset Volume: Check the in-line volume control on the headset cord and ensure it is not set to minimum or muted.
- Game Compatibility: Confirm that the game you are playing supports USB headsets for audio output.
Microphone Not Working
- Check Microphone Position: Ensure the microphone boom is positioned correctly near your mouth.
- Verify Console/Game Settings: Go to your PlayStation console's microphone settings or the in-game audio/voice chat settings. Confirm that the USB headset microphone is enabled and set as the input device.
- Game Compatibility: Ensure the game supports voice chat or command recognition with a USB headset. Some older games may not have this functionality.
- Test Microphone: If your console has a microphone test feature, use it to verify microphone functionality.
Specifications
| Feature | Value |
|---|---|
| Brand Name | Logitech |
| Model Number | 980174-0403 |
| Item Weight | 0.75 Pounds (approx. 340 grams) |
| Noise Control | Active Noise Cancellation (Microphone) |
| Audio Driver Type | Dynamic Driver |
| Enclosure Material | Velvet (interchangeable earpads include velvet, leatherette, foam) |
| Specific Uses For Product | Gaming |
| Compatible Devices | PlayStation 2, PlayStation 3 |
| Cable Features | 10-foot (approx. 3-meter) integrated cord |
| Additional Features | Microphone Included, Noise Cancellation |
| Headphone Jack | USB (digital audio) |
| Connectivity Technology | Wired |
| Headphones Ear Placement | Over Ear |
| Control Type | Volume Control (in-line) |
Warranty and Support
Warranty Information
- For detailed warranty information regarding your Logitech USB Vantage Headset, please refer to the warranty card included with your product packaging. You can also find the most up-to-date warranty terms and conditions on the official Logitech website.
Customer Support
- Should you require further assistance, technical support, or have questions not covered in this manual, please visit the Logitech support website. You can typically find FAQs, troubleshooting guides, and contact information for customer service there.