Panasonic PV-D4743S Progressive-Scan DVD-VCR Combo Instruction Manual

Introduction

This manual provides detailed instructions for the Panasonic PV-D4743S Progressive-Scan DVD-VCR Combo. This unit integrates a high-quality, progressive-scan DVD player and a four-head, hi-fi VCR, offering versatile media playback capabilities. It supports DVD-Video, VHS tapes, CD, audio CD-R and CD-RW, and video DVD-R formats. Key features include progressive scan output for clearer images on high-definition televisions, Dolby Digital and DTS surround sound outputs for compatible audio systems, and the ability to record a program while simultaneously watching a DVD.

Figure 1: Panasonic PV-D4743S DVD-VCR Combo unit and its remote control.

Setup Instructions

Follow these steps to connect your Panasonic PV-D4743S to your television and power source.

1. Unpacking: Carefully remove the DVD-VCR combo unit, remote control, and all cables from the packaging.
2. Placement: Place the unit on a stable, flat surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight.
3. Video Connection:
   • For optimal picture quality, connect the unit to your TV using a component video cable (red, green, blue connectors) for progressive scan output.
   • Alternatively, use an S-video cable for improved quality over composite video.
   • For standard definition, use a composite video cable (yellow connector).
4. Audio Connection:
   • Connect the unit's audio output (red and white RCA connectors) to your TV or audio receiver.
   • For Dolby Digital or DTS surround sound, connect an optical digital audio cable from the unit's optical output to a compatible audio/video receiver.
5. Antenna/Cable Connection (for VCR recording): Connect your antenna or cable TV line to the "RF IN" jack on the back of the unit, then connect the "RF OUT" jack to your TV's antenna input.
6. Power Connection: Plug the power cord into an AC outlet.
7. Remote Control Batteries: Insert two AA batteries into the remote control, ensuring correct polarity.
8. Initial Power On: Turn on the unit and your TV. Select the correct input source on your TV to view the DVD-VCR combo's output.

Operating Instructions

This section details how to use the DVD and VCR functions of your unit.

DVD Playback

1. Power On: Ensure the unit is powered on.
2. Select DVD Mode: Press the SOURCE button on the front panel or remote control until the DVD indicator light is illuminated.
3. Insert Disc: Press the OPEN/CLOSE button to open the disc tray. Place a DVD (DVD-Video, DVD-R, Video CD, CD, CD-R/RW, WMA, MP3 CD, JPEG) onto the tray with the label side facing up. Press OPEN/CLOSE again to close the tray.
4. Playback: The disc should begin playing automatically. If not, press the PLAY button.
5. Controls: Use the STOP, PAUSE, REW (rewind), FFWD (fast forward), PREV (previous), and NEXT buttons for playback control.
6. Eject Disc: Press OPEN/CLOSE to eject the disc.

VCR Playback

1. Power On: Ensure the unit is powered on.
2. Select VCR Mode: Press the SOURCE button on the front panel or remote control until the VCR indicator light is illuminated.
3. Insert Tape: Insert a VHS tape into the VCR slot. The unit will automatically load the tape.
4. Playback: Press the PLAY button to begin playback.
5. Controls: Use the STOP/EJECT, PAUSE, REW (rewind), and FFWD (fast forward) buttons for playback control.
6. Eject Tape: Press STOP/EJECT to eject the tape.

VCR Recording (One-Touch Recording)

To record a TV program:

1. Insert Recordable Tape: Insert a blank or recordable VHS tape into the VCR slot.
2. Select VCR Mode: Ensure the unit is in VCR mode.
3. Tune to Channel: Tune the VCR to the desired TV channel you wish to record.
4. Start Recording: Press the RECORD button. The unit will begin recording. Each press of the RECORD button typically adds 30 minutes to the recording time.
5. Stop Recording: Press the STOP/EJECT button to stop recording.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your DVD-VCR combo.

• Cleaning the Exterior: Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or abrasive materials.
• Disc Care: Handle DVDs and CDs by their edges. Clean discs with a soft, lint-free cloth, wiping from the center outwards.
• VCR Head Cleaning: The unit features an auto head cleaner. If picture quality degrades on VHS tapes, a specialized VCR head cleaning tape may be used sparingly.
• Ventilation: Ensure the ventilation slots on the unit are not blocked to prevent overheating.

Troubleshooting

Refer to this section for solutions to common issues.

Specifications

• Brand: Panasonic
• Model: PV-D4743S
• Media Type: CD, DVD, VHS
• Special Feature: Surround Sound
• Resolution: 1280x720 (Progressive Scan output)
• Connector Type: RCA, S-Video, Component Video, Optical Digital Audio
• Color: Silver
• Item Weight: 4.9 pounds
• Product Dimensions: 13.5 x 16.9 x 3.8 inches
• Batteries: 2 AA batteries required (for remote)

Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product at the time of purchase. For technical support, service, or replacement parts, please contact Panasonic customer service through their official website or the contact information provided in your product's original documentation.