Introduction
This manual provides comprehensive instructions for the safe and efficient operation of your KINYO KV-822 2-Way 8mm Rewinder. Please read this manual thoroughly before using the device and retain it for future reference. The KINYO KV-822 is designed to rewind and fast-forward 8mm video cassettes, helping to preserve your camcorder's internal mechanisms.
Safety Information
To ensure safe operation and prevent damage to the device or injury, please observe the following precautions:
- Do not expose the rewinder to moisture, rain, or extreme temperatures.
- Avoid dropping the device or subjecting it to strong impacts.
- Use only the specified power adapter or batteries.
- Do not attempt to disassemble or repair the unit yourself. Refer all servicing to qualified personnel.
- Keep the device away from sources of heat and direct sunlight.
- Ensure proper ventilation around the unit during operation.
Package Contents
Verify that all items are present in the package:
- KINYO KV-822 2-Way 8mm Rewinder Unit
- AC/DC Power Adapter (if included with your model)
- User Manual (this document)
Product Overview
The KINYO KV-822 is a dedicated 8mm tape rewinder designed for convenience and to reduce wear on your camcorder's delicate mechanisms. It features automatic brake control and LED direction indicators.
Figure 1: KINYO KV-822 2-Way 8mm Rewinder in its retail packaging. The image displays the device itself, along with branding and key features like "Rewind • F. Forward • Auto Break Control".
Figure 2: Top view of the KINYO KV-822 2-Way 8mm Rewinder, showing the tape compartment, control buttons (FF, REW, STOP, START), and LED indicators. The label "FLAP SIDE FACES OUT" is visible near the tape slot.
Controls and Indicators:
- FF (Fast Forward) Button: Initiates fast-forwarding of the tape.
- REW (Rewind) Button: Initiates rewinding of the tape.
- STOP Button: Halts any tape movement.
- START Button: Begins the selected operation (FF or REW).
- LED Direction Indicators: Lights up to show the current direction of tape movement (Fast Forward or Rewind).
- Tape Compartment: Area where the 8mm video cassette is inserted.
Setup
Powering the Device:
The KINYO KV-822 can be powered by either an AC/DC adapter or four (4) AA batteries.
- Using AC/DC Adapter:
- Locate the DC input jack on the rewinder.
- Connect the AC/DC power adapter to the DC input jack.
- Plug the AC/DC power adapter into a standard wall outlet.
- Using AA Batteries:
- Open the battery compartment cover, usually located on the bottom or side of the unit.
- Insert four (4) fresh AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Operating Instructions
Follow these steps to rewind or fast-forward your 8mm video cassettes:
- Insert Tape: Gently insert an 8mm video cassette into the tape compartment. Ensure the "FLAP SIDE FACES OUT" as indicated on the unit (refer to Figure 2). The tape should slide in smoothly. Do not force it.
- Select Direction:
- For Fast Forward, press the FF button.
- For Rewind, press the REW button.
- Start Operation: Press the START button. The rewinder will begin the selected operation. The LED indicator will remain lit during the process. The unit features an automatic brake control system for smooth operation.
- Stop Operation: To stop the tape movement at any time, press the STOP button. The tape will halt, and the LED indicator will turn off.
- Remove Tape: Once the operation is complete (or stopped), gently remove the 8mm video cassette from the compartment. The unit includes an auto tape leader rollback system to protect the tape.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your rewinder.
- Cleaning: Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the rewinder in a cool, dry place, away from direct sunlight and dust. If storing for an extended period, remove the batteries to prevent leakage.
- Tape Care: Ensure that the 8mm cassettes you use are clean and free from damage to prevent issues with the rewinder.
Troubleshooting
If you encounter issues with your KINYO KV-822, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power, dead batteries, or faulty adapter. | Check AC/DC adapter connection or replace AA batteries. Ensure batteries are inserted with correct polarity. |
| Tape does not move or moves slowly. | Low battery power, tape jammed, or mechanism issue. | Replace batteries or use AC/DC adapter. Ensure tape is inserted correctly and not damaged. Do not force tape. |
| LED indicators do not light up. | Unit not powered, or internal fault. | Verify power supply. If power is confirmed and indicators still fail, contact support. |
| Tape gets damaged or chewed. | Damaged tape, incorrect insertion, or internal mechanism fault. | Ensure tape is in good condition and inserted correctly. If problem persists, discontinue use and contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | KV-822 |
| Brand | KINYO |
| Product Dimensions | 9.5 x 6 x 2.8 inches |
| Item Weight | 1.2 pounds |
| Power Source | AC/DC Adapter or 4 AA Batteries |
| Key Features | Automatic brake control, Auto tape leader rollback system, LED direction indicators |
| Date First Available | August 28, 2002 |
Warranty and Support
Specific warranty details for the KINYO KV-822 are not provided in this document. Please refer to the warranty card included with your purchase or contact KINYO customer support for information regarding warranty coverage and service.
For technical assistance or further inquiries, please visit the official KINYO website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.
