Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your Fellowes Standard Monitor Riser, Model 91712. Designed to elevate your monitor to an ergonomic viewing height, this riser helps reduce neck and eye strain, promoting a more comfortable workspace. Please read these instructions carefully before use.
Image: The Fellowes Standard Monitor Riser, a sturdy platform with adjustable legs, in platinum and graphite colors.
Setup Instructions
Follow these steps to assemble and set up your monitor riser:
- Unpack Components: Carefully remove all components from the packaging. You should have one platform and four adjustable leg sections.
- Attach Legs: Insert each leg section firmly into the designated holes on the underside of the platform. Ensure they are securely seated.
- Adjust Height: The riser offers three height adjustments: 2 inches, 2.75 inches, and 4 inches. To adjust, pull the leg sections apart or push them together until the desired height is achieved. Ensure all four legs are set to the same height for stability.
- Apply Non-Skid Feet: Ensure the non-skid rubber feet are securely attached to the bottom of each leg. These provide stability and prevent sliding on your desk surface.
- Position Monitor: Place your monitor centrally on the riser platform. Ensure the monitor's base fits within the platform's dimensions.
- Cable Management: Utilize the integrated cable and power-cord guides on the riser to route your monitor's cables neatly, reducing clutter.
Image: Visual representation of the three height settings (2", 2.75", 4") for the monitor riser.
Image: A close-up view of an adjustable leg and its non-slip rubber foot, highlighting the simple height adjustment mechanism.
Image: A close-up showing cables being routed through the built-in cable management slots on the monitor riser.
Operating Instructions
The Fellowes Standard Monitor Riser is designed for straightforward use:
- Ergonomic Placement: Position your monitor so the top of the screen is at or slightly below eye level. This helps maintain a neutral neck posture.
- Weight Capacity: The riser is designed to support monitors weighing up to 60 lbs (27.2 kg). Do not exceed this weight limit to ensure stability and prevent damage.
- Space Utilization: The space beneath the riser can be used for storing keyboards, mice, or other small office supplies, helping to keep your desk organized.
Image: A person seated at a desk, demonstrating the ergonomic benefit of an elevated monitor using the Fellowes riser.
Image: The monitor riser with a graphic indicating its maximum weight capacity of 60 lbs.
Maintenance
To ensure the longevity and proper function of your monitor riser:
- Cleaning: Wipe the surface with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the plastic.
- Inspection: Periodically check the leg connections and non-skid feet to ensure they are secure and intact.
Troubleshooting
If you encounter any issues with your monitor riser, consider the following:
- Instability: Ensure all four legs are fully inserted into the platform and set to the same height. Verify that the non-skid feet are properly attached and making full contact with the desk surface.
- Sagging Platform: Check that the weight of your monitor does not exceed the 60 lbs (27.2 kg) capacity. Distribute the weight evenly on the platform.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 91712 |
| Material | High-impact Plastic |
| Color | Platinum/Graphite |
| Product Dimensions (L x W x H) | 13.63 x 13.75 x 2.75 inches (at lowest height) |
| Adjustable Heights | 2 inches, 2.75 inches, 4 inches |
| Weight Capacity | Up to 60 lbs (27.2 kg) |
| Item Weight | 1.28 pounds (0.58 kg) |
Warranty Information
The Fellowes Standard Monitor Riser (Model 91712) is backed by a 5-year limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Fellowes website or contact their customer support directly. Keep your proof of purchase for warranty claims.
Support
For further assistance, product inquiries, or to report any issues, please visit the official Fellowes website or contact their customer service department. Contact details can typically be found on the manufacturer's website under the 'Support' or 'Contact Us' sections.
Fellowes Official Website: www.fellowes.com
