1. Introduction
This manual provides essential instructions for the safe and effective use of your Canon CB-2LS Battery Charger. The CB-2LS is designed specifically for charging the Canon Lithium-Ion Battery Pack NB-1L, which powers various Canon PowerShot S series digital cameras.
Compatible Camera Models:
- Canon PowerShot S100
- Canon PowerShot S110
- Canon PowerShot S200
- Canon PowerShot S230
- Canon PowerShot S300
- Canon PowerShot S330
- Canon PowerShot S400
- Canon PowerShot S410
- Canon PowerShot S500
2. Safety Information
Please read all safety instructions before using the charger to prevent injury or damage to the product.
- Indoor Use Only: This charger is designed for indoor use. Do not expose it to rain or moisture.
- Proper Voltage: Ensure the power outlet voltage matches the charger's specifications (240 Volts AC).
- Avoid Short Circuits: Do not short-circuit the battery terminals.
- Keep Dry: Do not handle the charger or battery with wet hands.
- Ventilation: Do not cover the charger during operation. Ensure adequate ventilation.
- Children and Pets: Keep the charger and battery out of reach of children and pets.
- Discontinue Use: If the charger emits smoke, unusual odors, or excessive heat, unplug it immediately.
- Authorized Service: Do not attempt to disassemble or repair the charger yourself. Refer all servicing to qualified personnel.
3. Package Contents
The Canon CB-2LS Battery Charger package typically includes:
- Canon CB-2LS Battery Charger unit
Note: Battery Pack NB-1L is sold separately or included with compatible cameras.
4. Setup
Follow these steps to prepare your charger for use:
- Unpack the Charger: Carefully remove the CB-2LS charger from its packaging.
- Connect to Power: Plug the charger directly into a standard AC power outlet. The charger features a foldable AC power plug for convenience.
- Insert Battery: Align the Canon NB-1L battery pack with the charging slot on the CB-2LS charger. Gently slide the battery into the slot until it is securely seated. Ensure the battery contacts align with the charger contacts.

Image 1: The Canon CB-2LS Battery Charger with a compatible NB-1L battery inserted into the charging slot. The charger is compact and designed for direct wall plug-in.
5. Operating Instructions
Once the battery is inserted and the charger is plugged in, the charging process will begin automatically.
- Charging Indicator: The charger is equipped with an indicator light.
- Charging Status: When the battery is charging, the indicator light will typically be orange or red.
- Charging Complete: Once the battery is fully charged, the indicator light will change to green.
- Remove Battery: When the green light appears, the battery is fully charged. Gently remove the battery from the charger.
- Unplug Charger: Unplug the charger from the power outlet when not in use.
6. Maintenance
Proper care ensures the longevity and performance of your charger.
- Cleaning: Use a soft, dry cloth to clean the charger. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Impact: Do not drop the charger or subject it to strong impacts.
7. Troubleshooting
If you encounter issues with your charger, refer to the following common solutions:
- Charger Light Not On:
- Ensure the charger is securely plugged into a working AC outlet.
- Verify the battery is correctly inserted into the charging slot.
- Check if the battery is severely depleted or damaged.
- Battery Not Charging Fully:
- Ensure the battery contacts on both the charger and battery are clean and free of debris.
- The battery itself may be old or damaged and may need replacement.
- Charger Overheating:
- Unplug the charger immediately. Allow it to cool down.
- Ensure adequate ventilation around the charger during use.
- If overheating persists, discontinue use and contact Canon support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | 6897A001 |
| Compatible Battery | Canon Lithium-Ion Battery Pack NB-1L |
| Input Voltage | 240 Volts AC |
| Output Voltage | 240 Volts AC |
| Product Dimensions | 7.2 x 4.9 x 2 inches |
| Item Weight | 4 ounces (0.25 Pounds) |
| Safety Certification | UL Certified |
9. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your original product purchase or visit the official Canon website.
Canon Support Website: www.usa.canon.com/support
Note: Warranty terms and conditions may vary by region and purchase date.





