Sangean ATS-505P

Sangean ATS-505P FM Stereo/MW/LW/SW PLL Synthesized World Receiver

Instruction Manual

Introduction

This manual provides detailed instructions for the operation and maintenance of your Sangean ATS-505P FM Stereo/MW/LW/SW PLL Synthesized World Receiver. Please read this manual thoroughly before using the device to ensure proper function and to maximize your listening experience.

Safety Information

  • Do not expose the radio to extreme temperatures, direct sunlight, or high humidity.
  • Avoid dropping the radio or subjecting it to strong impacts.
  • Use only the specified power adapter and battery types.
  • Do not attempt to disassemble or modify the radio. Refer all servicing to qualified personnel.
  • Keep batteries out of reach of children.

Package Contents

Verify that all items are present in the package:

  • Sangean ATS-505P World Receiver
  • AC Adapter
  • Stereo Earbuds
  • ANT-60 SW Reel Antenna
  • User Manual (this document)

Product Overview

The Sangean ATS-505P is a portable digital multi-band receiver designed for clear reception across FM, MW (AM), LW, and Shortwave (SW) bands. It features a PLL synthesized tuning system for stable and accurate frequency selection.

Sangean ATS-505P FM Stereo/MW/LW/SW PLL Synthesized World Receiver

Image showing the front view of the Sangean ATS-505P radio, displaying its digital screen and control buttons.

Setup

1. Powering the Radio

The ATS-505P can be powered by either AA batteries or the included AC adapter.

Battery Installation

  1. Open the battery compartment cover on the back of the radio.
  2. Insert four (4) AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  3. Close the battery compartment cover securely.

AC Adapter Connection

  1. Connect the small plug of the AC adapter to the DC IN jack on the side of the radio.
  2. Plug the AC adapter into a standard wall outlet.

2. Antenna Connection

For optimal reception, especially on Shortwave bands, extend the telescopic antenna or connect the external ANT-60 SW reel antenna.

  • Telescopic Antenna: Extend the built-in telescopic antenna fully for FM and some SW reception. Adjust its angle for best signal.
  • ANT-60 SW Reel Antenna: For enhanced Shortwave reception, plug the ANT-60 reel antenna into the external antenna jack. Unwind the reel antenna and position it in an open area, away from metal objects or electrical interference.

Operating Instructions

1. Turning On/Off

Press the POWER button to turn the radio on or off.

2. Band Selection

Press the BAND button repeatedly to cycle through FM, MW (AM), LW, and SW bands. The selected band will be displayed on the LCD screen.

3. Tuning Methods

The ATS-505P offers several tuning methods:

  • 10-Key Pad Direct Frequency Access: Enter the desired frequency directly using the numeric keypad and press ENTER.
  • Auto Scan: Press the SCAN button to automatically scan and stop at the next strong station.
  • Manual Tuning: Use the TUNING UP/DOWN buttons or the rotary tuning knob to manually adjust the frequency.
  • Memory Recall: Press the MEMORY button and then use the numeric keypad or tuning buttons to select a stored station.
  • Rotary Tuning: Rotate the tuning knob for precise frequency adjustment.

4. Single Side Band (SSB) Reception

For receiving SSB transmissions, typically found on Shortwave bands:

  1. Select a Shortwave band.
  2. Tune to the desired SSB frequency.
  3. Activate the SSB function (refer to specific button on your unit).
  4. Use the FINE TUNE control to clarify the audio.

5. Memory Presets

The radio can store up to 45 stations in memory.

Storing a Station

  1. Tune to the desired station.
  2. Press the STORE button (or equivalent).
  3. Select a memory location using the numeric keypad or tuning buttons.
  4. Press ENTER to confirm.

Recalling a Station

Press the RECALL button (or equivalent) and then enter the memory location or use the tuning buttons to navigate through stored stations.

6. Clock and Alarm Settings

The radio features a digital clock with 12/24 hour display and an alarm function.

  • Setting Time: Refer to the specific buttons (e.g., TIME SET) on your unit to adjust the hour and minute.
  • Setting Alarm: Use the ALARM SET button to configure the alarm time and activation. The

    Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.