Bounty Hunter Sharp Shooter II Metal Detector User Manual

1. Introduction

The Bounty Hunter Sharp Shooter II is a metal detector designed for efficient and precise target identification. It features an intuitive LCD display that provides probable target ID and depth readings, enhancing the user's ability to distinguish between various metals. Its lightweight design and user-friendly controls make it suitable for both adults and children interested in locating coins, jewelry, and relics.

Key features include an 8-inch waterproof search coil for versatile use in different environments, adjustable sensitivity for detecting objects at varying depths, and advanced discrimination controls to filter out unwanted items. The detector also incorporates Ground Trac for automatic ground balancing, optimizing performance across diverse soil conditions.

2. Package Contents

• Bounty Hunter Sharp Shooter II Metal Detector Unit
• 8-inch Waterproof Search Coil
• Adjustable Stem and Armrest Assembly
• User Manual (this document)

Note: Two 9-volt alkaline batteries are required for operation and are not included in the package.

3. Setup

3.1 Assembly

1. Attach the search coil to the lower stem using the provided bolt and wing nut. Ensure it is securely fastened but allows for slight angle adjustment.
2. Insert the lower stem into the middle stem, adjusting the length to a comfortable position.
3. Slide the control housing onto the upper stem and secure it.
4. Attach the armrest to the upper stem, ensuring it supports your forearm comfortably during use.
5. Wrap the search coil cable around the stem, leaving enough slack for coil movement, and plug the connector into the control housing.

3.2 Battery Installation

The Sharp Shooter II requires two 9-volt alkaline batteries. To install:

1. Locate the battery compartment on the control housing.
2. Open the compartment cover.
3. Insert two 9-volt alkaline batteries, observing the correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment cover securely.

A low-battery indicator will appear on the LCD display when batteries need replacement.

Figure 3.2.1: Fully assembled Bounty Hunter Sharp Shooter II Metal Detector.

4. Control Panel Overview

The control panel provides access to all detector functions and displays target information. Familiarize yourself with its layout before operation.

Figure 4.1.1: Detailed view of the Sharp Shooter II control panel, showing sensitivity and discrimination knobs, LCD display, and mode buttons.

• Sensitivity Knob: Adjusts the detector's sensitivity to targets. Turn clockwise for higher sensitivity (deeper detection) and counter-clockwise for lower sensitivity (to reduce false signals).
• Discrimination Knob: Controls the level of metal discrimination. Turn clockwise to reject more ferrous and unwanted metals.
• LCD Display: Shows target identification categories (e.g., Iron, Foil, 5¢, 10¢, 25¢, 50¢, $1), target depth, and battery status.
• Mode Buttons: Selects different operating modes (ALL METAL, DISC, NOTCH, AUTO NOTCH).
• RETUNE Button: Used to re-tune the detector in All Metal mode.
• Headphone Jack: For connecting headphones (1/4-inch jack).

5. Operating Instructions

5.1 Power On and Basic Settings

1. Turn the Sensitivity knob clockwise from the 'OFF' position to power on the detector.
2. Start with the Sensitivity knob set to a medium level. Adjust higher for increased depth or lower to reduce interference in highly mineralized ground or areas with electrical noise.
3. Set the Discrimination knob to 'OFF' initially for an 'All Metal' search, or adjust it to filter out unwanted metals.

5.2 Operating Modes

• ALL METAL Mode: Press the 'ALL METAL' button. In this mode, the detector will respond to all types of metal. This is ideal for finding all metal objects or for initial ground scanning.
• DISC (Discrimination) Mode: Press the 'DISC' button. Use the Discrimination knob to set the rejection level for unwanted metals. The detector will emit different tones for varying types of metal, and the LCD will show target ID.
• NOTCH Mode: Press the 'NOTCH' button. This mode allows you to selectively reject specific categories of metal targets while accepting others. Refer to the LCD display for target categories to notch out.
• AUTO NOTCH Mode: Press the 'AUTO NOTCH' button. This mode automatically rejects common trash items like iron and pull-tabs, focusing on more valuable targets.

5.3 Ground Trac (Automatic Ground Balance)

The Sharp Shooter II features Ground Trac, which automatically balances the machine to the soil conditions. This helps to minimize false signals caused by ground mineralization, ensuring more accurate detection.

5.4 Interpreting the LCD Display

The LCD provides visual target identification and depth information:

• Target ID Categories: The top bar graph indicates the probable type of metal detected (e.g., Iron, 5¢, 10¢, 25¢, Silver).
• Depth Readout: The lower display provides an approximate depth of the target.
• Low Battery Indicator: Alerts you when battery power is low and replacement is needed.

5.5 Search Coil Movement

Sweep the search coil slowly and steadily from side to side, keeping it parallel to the ground and approximately 1-2 inches above the surface. Overlap each sweep by about half the coil's diameter to ensure thorough coverage.

6. Maintenance

• Cleaning: Wipe down the detector with a damp cloth after each use. Avoid abrasive cleaners or solvents. The search coil is waterproof and can be rinsed with fresh water.
• Battery Care: Remove batteries if the detector will not be used for an extended period to prevent leakage. Always use fresh alkaline batteries.
• Storage: Store the detector in a cool, dry place. Avoid extreme temperatures.
• Coil Protection: While the search coil is waterproof, avoid submerging the control housing.

7. Troubleshooting

• No Power: Check battery installation and ensure batteries are fresh.
• Erratic Signals/Chatter: Reduce sensitivity. Ensure the search coil cable is tightly wrapped around the stem and not swinging freely. Move away from power lines or other electronic devices.
• Poor Depth Detection: Increase sensitivity. Ensure ground balance is properly set (Ground Trac is automatic). Check for large metal objects nearby that might be causing interference.
• Inaccurate Target ID: Ensure the search coil is swept slowly and consistently. Highly mineralized ground or deeply buried objects can affect accuracy.

8. Specifications

9. Warranty and Support

The Bounty Hunter Sharp Shooter II Metal Detector is covered by a 5-year limited warranty. For detailed warranty information, technical support, or to download the full manual, please visit the official Bounty Hunter website at www.detecting.com.

For any questions or assistance, please contact Bounty Hunter customer service through their official website.