Product Overview
The Taylor Programmable Digital Cooking Probe Thermometer with Timer, Model 1470, is designed to accurately monitor the internal temperature of food during cooking, eliminating the need to open ovens or grills. It features a durable stainless steel probe connected by a 4-foot silicone cord to a digital display unit. This versatile thermometer also includes a programmable timer and temperature alarm to ensure precise cooking results.
Image: The Taylor Model 1470 Digital Cooking Probe Thermometer, showing the main unit with its digital display and control buttons, connected to the stainless steel probe via a red silicone cord.
Setup and Initial Use
Battery Installation:
The thermometer requires 2 AAA batteries, which are included. Locate the battery compartment on the back of the main unit. Open the compartment, insert the batteries according to the polarity indicators (+/-), and close the cover securely.
Probe Connection:
Insert the stainless steel probe's jack firmly into the port on the side of the main unit. Ensure a secure connection for accurate readings.
Placement:
The main unit can be positioned in several ways:
- Angled Stand: Fold out the integrated stand on the back of the unit to prop it up for easy viewing.
- Flat Surface: Lay the unit flat on a countertop.
- Magnetic Mount: Utilize the magnets on the back of the unit to attach it temporarily to a metal surface, such as a refrigerator or oven exterior (ensure surface is not excessively hot).
Image: Side view of the Taylor thermometer, demonstrating its ability to be angled for better visibility using its integrated stand.
Operating Instructions
Temperature Monitoring
Insert Probe:
Carefully insert the stainless steel probe into the thickest part of the food, avoiding bones or gristle. Ensure the probe tip is fully immersed for an accurate reading.
Image: The thermometer probe inserted into a roast in a baking pan, with the main unit placed nearby to monitor temperature.
Set Target Temperature:
Press the TEMP UP or DOWN buttons to adjust the desired target temperature. The display will show both the current temperature (Thermo Temp) and the set target temperature (Set Temp).
Activate Temperature Alert:
Slide the TEMP ALERT switch to the "ON" position. An alarm will sound when the food reaches the set target temperature.
Monitor Temperature:
The large digital display will continuously show the current internal temperature of your food. The response time for temperature changes is approximately 5 seconds.
Timer Function
Set Timer:
Press the HR button to set hours and the MIN button to set minutes for the countdown timer. The timer range is up to 24 hours.
Start/Stop Timer:
Press the START / STOP button to begin the countdown. Press it again to pause or stop the timer.
Clear Timer:
Press the CLEAR button to reset the timer to 0:00.
Image: A close-up front view of the Taylor thermometer's main unit, highlighting the digital display and control buttons for temperature and timer settings.
Maintenance and Care
Cleaning:
For best results, hand wash only. Do not submerge the main unit or the probe wire in water, especially where the wire meets the probe. Wipe the main unit with a damp cloth. The stainless steel probe can be cleaned with warm, soapy water, ensuring the wire connection point remains dry.
Probe Wire Care:
To ensure longevity and accuracy, take care not to expose the probe wire to direct flame or cooking surfaces. Avoid crimping the wire in oven doors or grill lids.
Image: Visual instructions for wired probe care, showing warnings against exposing the wire to direct heat, crimping it in oven doors, and submerging it in water, especially at the probe connection.
Handling Hot Probe:
The thermometer probe will be hot after use. Always use oven mitts or potholders when handling the hot probe to prevent burns.
Storage:
When not in use, store the thermometer in a clean, dry place. The unit folds flat for compact storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display or dim display. | Low or dead batteries; incorrect battery installation. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Inaccurate temperature readings. | Probe not fully inserted; probe wire damaged; probe tip touching bone/gristle. | Ensure probe is fully inserted into the thickest part of the meat, away from bones. Check probe wire for visible damage. If damaged, the probe may need replacement. |
| Alarm does not sound. | Temperature alert switch is off; volume too low (if adjustable, though not specified for this model). | Ensure the TEMP ALERT switch is in the "ON" position. |
| Timer not functioning. | Timer not started; incorrect setting. | Press START / STOP to begin. Verify hours and minutes are set correctly. |
Specifications
- Model: 1470
- Brand: Taylor
- Temperature Range: 32°F to 392°F (0°C to 200°C)
- Response Time: Approximately 5 seconds
- Probe Length: 6 inches (immersion depth)
- Cord Length: 4 feet (silicone)
- Power Source: 2 x AAA batteries (included)
- Materials: Stainless Steel probe, Silicone cord, Plastic main unit
- Display Type: Digital
- Dimensions (folded): Approximately 5.12 inches (length)
- Weight: 4.8 ounces
- Indoor/Outdoor Usage: Indoor
Image: Back view of the Taylor thermometer, illustrating its compact folded form and the magnetic back for convenient storage or mounting.
Warranty and Support
Specific warranty information for the Taylor Programmable Digital Cooking Probe Thermometer, Model 1470, was not provided in the product data. Please refer to the product packaging or the official Taylor website for the most current warranty details and customer support contact information.
For further assistance or inquiries, please visit the official Taylor website or contact their customer service department.
