Introduction and Overview
The IPG AC36 DUCTape is an 11 mil polyethylene coated cloth tape featuring an aggressive natural rubber adhesive system. It is engineered to deliver exceptional shear strength and is suitable for a wide range of demanding applications. This manual provides essential information for the proper use and care of your AC36 DUCTape.
Product Features
- 11 Mil Heavy Duty Duct Tape with aggressive natural rubber adhesive.
- Designed for HVAC applications, asbestos/lead/fiberglass abatement, and extermination.
- Ideal for weather-proofing, as gasket material for flex-duct connections, and temporary wrapping.
- Meets HUD, L.A. County, and BOCA codes; Tested in accordance with UL-723.
- Available in Red, Black, and Silver.
Setup and Preparation
Proper surface preparation is crucial for optimal adhesion and performance of the AC36 DUCTape.
- Surface Cleaning: Ensure the surface where the tape will be applied is clean, dry, and free of any dust, dirt, oil, grease, or other contaminants. Use an appropriate cleaner if necessary and allow the surface to dry completely.
- Temperature Conditions: For best results, apply the tape in temperatures above 40°F (4°C). Extreme cold can reduce initial tack.
- Unrolling: Carefully unroll the desired length of tape from the roll. Avoid touching the adhesive side excessively to maintain its stickiness.
Image: A single roll of IPG AC36 DUCTape in silver, showing the product label and dimensions.
Operating Instructions and Applications
The AC36 DUCTape is versatile and can be used for various applications:
- HVAC Systems: Ideal for sealing and joining ductwork, ensuring airtight connections in heating, ventilation, and air conditioning systems.
- Abatement Projects: Suitable for sealing off areas during asbestos, lead, or fiberglass abatement procedures due to its strong adhesion and durability.
- Weatherproofing: Can be used to seal gaps and cracks to prevent water and air infiltration, providing temporary weather protection.
- Flex-Duct Connections: Acts as an effective gasket material for connecting flexible ducts, providing a secure and durable seal.
- General Maintenance: Useful for temporary repairs, bundling, patching, and other general-purpose maintenance tasks around the home or job site.
Application Technique:
Apply the tape firmly and smoothly to the desired surface. Press down along the entire length of the tape to ensure maximum contact and to eliminate any trapped air bubbles. For critical applications, consider overlapping tape sections for enhanced strength and sealing.
Image: A roll of IPG AC36 DUCTape with a section unrolled, illustrating its heavy-duty, contractor-grade quality and suitability for job site and all-purpose use.
Maintenance and Care
To ensure the longevity and effectiveness of your IPG AC36 DUCTape:
- Storage: Store unused rolls in a cool, dry place, away from direct sunlight and extreme temperatures. High heat can degrade the adhesive over time.
- Protection: Keep the tape roll sealed in its original packaging or a protective bag when not in use to prevent dust, dirt, and debris from accumulating on the edges and adhesive surface.
- Handling: Avoid dropping the roll, which can damage the edges and make unrolling difficult.
Troubleshooting
Common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor Adhesion | Dirty, wet, or oily surface; low application temperature; insufficient pressure during application. | Ensure surface is clean, dry, and free of contaminants. Apply tape in recommended temperature range. Apply firm, even pressure across the tape. |
| Tape Tearing Unevenly | Dull cutting tool; improper tearing technique. | Use a sharp utility knife or scissors for clean cuts. For manual tearing, ensure a quick, decisive tear. |
| Adhesive Residue After Removal | Tape left on surface for extended periods; surface type. | For temporary applications, remove tape promptly. Use a commercial adhesive remover suitable for the surface material. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | IPG |
| Model Number | 4137 |
| Color | Silver |
| Material | Polyethylene Coated Cloth with Natural Rubber Adhesive |
| Product Dimensions | 60"L x 1.87"W x 13"Th (Roll dimensions) |
| Size | 1.88" x 60 yd. |
| Item Thickness | 11 mil |
| Item Weight | 1.49 pounds |
| Recommended Uses | Indoor, Outdoor (HVAC, Abatement, Weatherproofing, General Maintenance) |
| Water Resistance Level | Water Resistant |
| Certifications | Meets HUD, L.A. County, and BOCA codes; Tested in accordance with UL-723 |
Warranty and Support
Specific warranty information for the IPG AC36 DUCTape is typically provided at the point of purchase or can be obtained directly from the manufacturer. For detailed warranty terms, product support, or to inquire about other IPG products, please refer to the official IPG website or contact their customer service.
You can visit the official IPG store for more information: IPG Store on Amazon
