InterAct StormChaser GamePad Instruction Manual

1. Product Overview

The InterAct StormChaser GamePad is designed for use with PlayStation and PlayStation 2 consoles. It features dual analog control sticks, six analog fire buttons, and four shoulder buttons. This gamepad offers advanced programmability for button sensitivity and combination functions, allowing for customized control. Additional features include button relocation, auto-fire capabilities, dual vibration feedback, a left/right axis-swap switch, and a digital-to-analog mode switch. Ergonomic rubber handgrips are integrated for enhanced comfort during use.

Figure 1: Front view of the InterAct StormChaser GamePad. This image displays the dual analog sticks, D-pad, six face buttons, and the ergonomic rubber handgrips.

2. Setup Instructions

1. Connect the GamePad: Insert the StormChaser GamePad connector into an available controller port on your PlayStation or PlayStation 2 console. Ensure the connection is secure.
2. Power On Console: Turn on your PlayStation or PlayStation 2 console. The gamepad should be recognized automatically.
3. Mode Selection: If your game requires a specific input mode (digital or analog), use the digital-to-analog mode switch located on the gamepad to select the appropriate setting.

3. Operating Instructions

3.1. Button Layout and Basic Functions

• Dual Analog Sticks: Provide precise 360-degree control for movement and camera adjustments.
• D-Pad (Directional Pad): Offers digital directional input, typically for menu navigation or specific game actions.
• Six Analog Fire Buttons: Located on the right side, these buttons provide pressure-sensitive input for various in-game actions.
• Four Shoulder Buttons (L1, L2, R1, R2): Located on the top of the gamepad, these provide additional input options.
• Start/Select Buttons: Standard console function buttons. Note: These buttons are not programmable.
• L3/R3 Buttons: Integrated into the analog sticks (press down on the stick). Note: These buttons are not programmable.

3.2. Advanced Features

The StormChaser GamePad includes several programmable features to enhance your gaming experience.

Button Programming:

The 6 face buttons, 4 trigger buttons (L1, L2, R1, R2), and the D-pad can be programmed. This allows you to assign a single button to perform the function of another button or a sequence of button presses.

1. Press the PROGRAM button. The gamepad will emit a confirmation sound (e.g., "beep beep").
2. Press the button you wish to program (the target button). A single beep will confirm selection.
3. Hold down the button(s) or sequence of buttons you want the target button to emulate. A beep will confirm input.
4. Hold the PROGRAM button again to save the setting. Two beeps will confirm successful programming.

The controller saves layouts for analog and digital modes separately.

Auto-Fire Function:

Specific buttons can be set to auto-fire, providing rapid, continuous input without repeated presses. Refer to the programming instructions above to assign auto-fire to a desired button.

Left/Right Axis-Swap Switch:

This switch allows you to swap the functions of the left and right analog sticks, which can be useful for certain games or user preferences.

• To swap analog stick functions: Hold down the Start button and the Select button simultaneously while turning on the console.

Digital-to-Analog Mode Switch:

This switch toggles the input mode between digital and analog, ensuring compatibility with a wide range of PlayStation and PlayStation 2 games.

Dual Vibration Feedback:

The gamepad provides tactile feedback through vibration, enhancing immersion in games that support this feature.

4. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the gamepad. For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners.
• Storage: Store the gamepad in a cool, dry place away from direct sunlight and extreme temperatures. Avoid wrapping the cable tightly around the controller to prevent damage.
• Cable Care: Do not pull on the cable to disconnect the gamepad from the console. Always grasp the connector itself.

5. Troubleshooting

• Controller Not Responding:
  • Ensure the gamepad cable is securely connected to the console's controller port.
  • Try connecting the gamepad to a different controller port on the console.
  • Test the gamepad with a different game or console if possible.
• Buttons or Analog Sticks Are Stiff/Unresponsive:
  • New controllers may require a break-in period for buttons and sticks to loosen.
  • Ensure no debris is lodged around the buttons or sticks.
  • Perform a controller reset: Hold down L2 + R1 + Circle buttons simultaneously while turning on the console.
• Vibration Feedback Not Working:
  • Verify that the game you are playing supports vibration feedback.
  • Check in-game settings to ensure vibration is enabled.
• Incorrect Button Functions After Programming:
  • Repeat the programming steps carefully to ensure correct assignment.
  • Perform a controller reset to clear all custom programming.

6. Specifications

7. Warranty and Support

Specific warranty details and direct customer support contact information are not provided within this manual. For warranty inquiries or technical assistance, please refer to the product packaging or contact the retailer where the product was purchased. You may also visit the official InterAct website for potential support resources.