1. Introduction
This instruction manual provides essential information for the proper use, care, and maintenance of your KitchenAid 5 Quart Polished Stainless Steel Bowl, model K5ASBP. Please read this manual thoroughly before first use to ensure optimal performance and longevity of your product.
2. Product Overview
The KitchenAid 5 Quart Polished Stainless Steel Bowl (K5ASBP) is designed as an accessory for select KitchenAid Bowl-Lift Stand Mixers. It features a durable stainless steel construction with a polished exterior and a flat handle for secure handling and attachment.
Image 1: Front view of the KitchenAid 5 Quart Polished Stainless Steel Bowl, showing the flat handle and polished finish.
3. Compatibility
This 5-quart bowl is specifically designed for use with the following KitchenAid Bowl-Lift Stand Mixer models:
- KSM500
- KSM450
- KPM5
- KPM50
- K5SS
- KSM5
Ensure your mixer model is listed above for proper fit and function. This bowl is not compatible with tilt-head stand mixers.
4. Setup and Installation
To install the bowl onto your KitchenAid Bowl-Lift Stand Mixer:
- Ensure the mixer is turned off and unplugged from the power outlet.
- Raise the mixer head to its highest position using the bowl-lift lever.
- Place the bowl's rear pin into the spring-loaded pin on the mixer's bowl clamping plate.
- Press down on the back of the bowl until the front pins snap over the bowl clamps.
- Lower the mixer head using the bowl-lift lever until it locks into the mixing position.
- To remove, reverse these steps.
Image 2: Diagram illustrating the dimensions of the 5-quart bowl, showing a height of 7.1 inches (17 cm).
5. Operation (Usage)
Once the bowl is securely attached to your KitchenAid Bowl-Lift Stand Mixer, you can proceed with your mixing tasks. The 5-quart capacity is suitable for a variety of recipes, including large batches of dough or batter. Always ensure the appropriate attachment (flat beater, wire whip, dough hook) is correctly installed and adjusted for bowl clearance before operating the mixer.
6. Cleaning and Maintenance
The KitchenAid 5 Quart Polished Stainless Steel Bowl is designed for easy cleaning.
- Dishwasher Safe: The bowl is dishwasher safe. Place it on the top rack for best results.
- Hand Washing: For hand washing, use warm, soapy water and a non-abrasive sponge or cloth. Rinse thoroughly and dry immediately to prevent water spots.
- Stubborn Stains: For stubborn food residue, soak the bowl in warm, soapy water before cleaning. Avoid using steel wool or abrasive cleaners, as these can scratch the stainless steel surface.
7. Troubleshooting
If you encounter issues with your bowl, consider the following:
- Bowl Not Fitting Securely:
- Verify that your mixer model is listed in the "Compatibility" section (Section 3).
- Ensure the bowl is correctly aligned with the mixer's pins and clamps as described in "Setup and Installation" (Section 4).
- Check for any obstructions or damage to the bowl's pins or the mixer's clamping plate.
- Scratches or Discoloration:
- Avoid using abrasive cleaning tools or harsh chemicals.
- Stainless steel can sometimes show water spots; ensure thorough drying after washing.
8. Specifications
| Model Number | K5ASBP |
| Capacity | 5 Quarts |
| Material | Polished Stainless Steel |
| Color | Silver |
| Dimensions (W x H) | 10" x 8" (approximately) |
| Item Weight | 1.67 pounds |
| Dishwasher Safe | Yes |
| Microwaveable | No |
9. Warranty and Support
For specific warranty information regarding your KitchenAid accessory, please refer to the documentation included with your original KitchenAid Stand Mixer or visit the official KitchenAid website. For customer support, product registration, or to purchase additional accessories, please visit www.kitchenaid.com or contact KitchenAid customer service directly.
