Intex JUMP-O-LENE Inflatable Bouncer User Manual

Important Safety Information

Read all instructions carefully before assembly and use. Failure to follow these instructions can result in serious injury or death.

• Adult supervision is required at all times.
• Maximum weight capacity: 120 lbs (54 kg).
• Maximum number of children: 2.
• Recommended age: 36 months to 6 years.
• Do not allow children to jump or play near the edges.
• Ensure the product is placed on a soft, level surface, free from sharp objects.
• Keep away from fire and heat sources.
• Do not use during electrical storms.
• This product is not a flotation device.

Product Overview

The Intex JUMP-O-LENE is an inflatable bouncer designed for indoor and outdoor use. It provides a safe and fun environment for children to jump and play. It can also be converted into a ball pit by adding play balls (not included).

Image: The Intex JUMP-O-LENE inflatable bouncer, showcasing its vibrant colors and circular design.

• Dimensions: 79.92 x 79.92 x 27.17 inches (203 x 203 x 69 cm)
• Material: Heavy-duty vinyl
• Features: Inflatable floor, high sidewalls, built-in ledge for sitting.
• Included: Repair patch.

Setup Instructions

1. Choose a Location: Select a flat, level surface free from sharp objects, debris, or uneven ground. Ensure there is adequate clear space around the bouncer (at least 6 feet or 1.8 meters) to prevent collisions with walls, furniture, or other obstacles. For outdoor use, avoid placing under trees or near structures that could drop debris.

2. Unfold and Lay Flat: Carefully remove the JUMP-O-LENE from its packaging and unfold it completely on the chosen surface. Ensure the product is not twisted or creased.

3. Inflation: Locate the inflation valves. Use a manual or electric air pump (not included) designed for inflatable products. Inflate each chamber until it is firm to the touch but not over-inflated. Over-inflation can cause damage or bursting. Ensure all valves are securely closed after inflation.

   

   Image: A close-up view of the JUMP-O-LENE's side, highlighting the "JUMP-O-LENE" logo and the texture of the inflatable rings.

4. Check for Leaks: After inflation, check all seams and valves for any air leaks. A simple method is to spray a soapy water solution over the surface; bubbles will indicate a leak. If a leak is found, use the included repair patch as described in the Maintenance section.

Operating Instructions

Once fully inflated and checked, the JUMP-O-LENE is ready for use.

• Supervision: Always ensure constant adult supervision when children are using the bouncer.
• Entry and Exit: Instruct children to enter and exit the bouncer carefully, preferably one at a time.
• Jumping: Encourage children to jump in the center of the bouncer. Discourage jumping too close to the sidewalls or attempting to jump out of the bouncer.
• Ball Pit Conversion: To use as a ball pit, simply add soft play balls (sold separately) into the bouncer. Ensure the number of balls does not exceed a safe level that could impede movement or create a hazard.
• Prohibited Activities: Do not allow sharp objects, toys with sharp edges, or food/drinks inside the bouncer. Do not allow pets inside.

Image: Two children actively jumping and playing inside the JUMP-O-LENE, demonstrating its use as a bouncer.

Image: A young child standing inside the JUMP-O-LENE, placed outdoors on a grassy area, showing its suitability for outdoor play.

Maintenance

• Cleaning: Clean the bouncer with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Rinse thoroughly and allow to air dry completely before storing.
• Repairing Punctures:
  1. Locate the puncture. If difficult to find, inflate the bouncer and apply soapy water to the surface; bubbles will indicate the leak.
  2. Ensure the area around the puncture is clean and dry.
  3. Cut a patch from the included repair kit that is larger than the puncture.
  4. Apply adhesive (not included, typically PVC glue) to the back of the patch and firmly press it over the puncture.
  5. Allow the adhesive to cure for at least 4 hours before re-inflating.
• Storage: Deflate the bouncer completely. Ensure it is clean and dry to prevent mold or mildew. Fold it neatly and store in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Specifications

• Product Dimensions: 79.92 x 79.92 x 27.17 inches
• Item Weight: 18.99 pounds
• Model Number: 48267EP
• Manufacturer Recommended Age: 36 months - 6 years
• Maximum Weight Capacity: 120 lbs
• Maximum Children: 2
• Material: Heavy Duty Vinyl
• Included Accessories: Repair Patch

Warranty and Support

For warranty information or product support, please contact Intex customer service. Refer to the product packaging or the official Intex website for the most current contact details.

Visit the Intex Store for more products and information.