1. Introduction
This manual provides instructions for the proper use and maintenance of your Shop-Vac 9067133 High Efficiency Disposable Vacuum Filter Bags. These bags are designed for efficient collection of fine dust particles in Shop-Vac wet/dry vacuums with 5 to 9 gallon tanks. Please read these instructions carefully before use.
2. Setup
2.1 Unpacking
Carefully remove the filter bags from their packaging. Inspect the bags for any damage. Do not use damaged bags.
Figure 1: Shop-Vac 9067133 High Efficiency Disposable Filter Bags (2-Pack).
2.2 Compatibility
These disposable filter bags are designed to fit standard Shop-Vac wet/dry vacuums with 5 to 9 gallon tanks that are equipped with side inlets. They are not compatible with 5 Gallon Wall Mount or HangUp Vacs. Ensure your vacuum model is compatible before installation.
Figure 2: Compatibility diagram for 5-9 gallon Shop-Vac tanks.
2.3 Installation
- Ensure the vacuum cleaner is unplugged from the power source.
- Remove the power head from the vacuum tank.
- Locate the inlet port inside the tank.
- Carefully slide the filter bag's cardboard collar over the inlet port until it is securely seated. Ensure the bag is fully open and positioned inside the tank without obstructing the inlet.
- Replace the power head and secure it properly.
Figure 3: Visual guide for installing the filter bag into a Shop-Vac.
Video 1: Product Overview and Installation Guide for Shop-Vac Disposable Filter Bags. This video demonstrates the proper way to install the filter bags for optimal performance.
3. Operating Instructions
3.1 Dry Pick-Up Only
These high-efficiency bags are designed exclusively for dry pick-up applications. They are effective in capturing fine dust particles such as drywall dust, cement dust, and cold ashes. Do not use these bags for wet vacuuming or picking up liquids. Using them for wet pick-up can damage the bag and potentially the vacuum.
Figure 4: The filter bags are for dry pick-up only.
3.2 Enhanced Filtration
The high-efficiency design of these bags aids in filtering fine dust particles, reducing the amount of dust that blows back into the room through the exhaust port. This contributes to a cleaner working environment.
Figure 5: Fine filtration capability for dust control.
4. Maintenance
4.1 Bag Replacement
Replace the filter bag when it is full or when you notice a decrease in vacuum suction. Regular replacement ensures optimal performance and filtration efficiency.
4.2 Disposal
To dispose of a full bag:
- Unplug the vacuum cleaner from the power source.
- Remove the power head from the tank.
- Carefully remove the filled bag from the inlet port.
- Seal the bag to prevent dust from escaping.
- Dispose of the sealed bag in accordance with local waste disposal regulations.
Figure 6: The filter bags are designed for easy disposal.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced Suction | Bag is full or partially clogged. | Replace the disposable filter bag. |
| Dust Escaping | Bag not properly installed or damaged. | Ensure bag is securely seated over the inlet. Inspect for tears and replace if damaged. |
| Bag does not fit | Incorrect bag size for vacuum tank. | Verify your vacuum tank size (5-9 gallons) and ensure it has a side inlet. |
6. Specifications
- Model Number: 9067133
- Compatibility: Shop-Vac wet/dry vacuums with 5-9 gallon tanks (with side inlets)
- Material: Paper
- Filtration Type: High Efficiency (for fine dust)
- Usage: Dry pick-up only
- Included: 2 bags per pack
- Item Dimensions: 13.75 x 10.5 x 7 inches
- Item Weight: 0.01 Ounces
7. Warranty & Support
These filter bags are covered by the manufacturer's warranty. For specific warranty details or technical support, please refer to the official Shop-Vac website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
Manufacturer: Shop-Vac USA LLC
Warranty Description: Manufacturer