EarthWay 2150 Commercial 50 LB Broadcast Fertilizer Spreader

Introduction

The EarthWay 2150 Commercial 50 LB Broadcast Fertilizer Spreader is designed for efficient and precise application of various granular materials such as fertilizers, seeds, and ice melt. Featuring heavy-duty construction and user-friendly design, this walk-behind spreader ensures consistent performance for professional and home use.

Setup & Assembly

Carefully unpack all components and refer to the included user manual for detailed assembly instructions. Ensure all parts are present before beginning. The assembly process typically involves attaching the handle, hopper, and wheels to the main frame.

Figure 1: Fully assembled EarthWay 2150 Spreader.

For a comprehensive visual guide, please watch the official assembly video provided by EarthWay Products Inc.:

Key assembly points include securing the hopper to the frame, attaching the fully enclosed gearbox, and installing the 13-inch pneumatic stud tires. The clog-free grate should be placed inside the hopper to prevent large clumps from obstructing material flow.

Figure 2: Installing the removable clog-free grate into the hopper.

Operating Instructions

Before operation, ensure the spreader is on a level surface and the flow rate is set to 'off'. Fill the hopper with your desired material, ensuring the grate is in place to filter out large particles. Adjust the drop rate directly on the spreader according to the material and desired application density.

Figure 3: Adjusting the material drop rate for precise application.

The EarthWay 2150 features a 3-hole-drop system with side-spread control, promoting an even spread pattern with feathered edging. This allows for accurate applications and helps prevent material from spreading into unwanted areas like flowerbeds or driveways. The 13-inch high flotation pneumatic stud tires provide smooth operation over rough or uneven terrain.

Figure 4: Operating the EarthWay 2150 Spreader on a lawn.

Maintenance

To ensure the longevity and optimal performance of your EarthWay 2150 spreader, it is crucial to clean it thoroughly after each use. Residual fertilizer or seed can cause corrosion and hinder the functionality of moving parts. Rinse the hopper, spreader plate, and all exposed metal components with water. Allow all parts to dry completely before storage.

The fully enclosed gearbox is designed for years of service and requires minimal maintenance. Periodically check the pneumatic tires for proper inflation to ensure smooth operation and even spreading.

Troubleshooting

Clogging Issues:

If material flow is obstructed, first ensure the clog-free grate is properly installed and free of large clumps. Break up any hardened material in the hopper. Ensure the flow rate lever is fully open for the desired setting.

Uneven Spread Pattern:

Verify that the drop rate setting is appropriate for the material being used. Ensure the pneumatic tires are evenly inflated to maintain consistent ground contact. Walk at a steady pace to promote an even distribution.

Tire Deflation:

Pneumatic tires may lose air over time. Inflate tires to the recommended pressure before each use. If frequent deflation occurs, inspect for punctures or valve stem issues.

Specifications

Warranty & Support

The EarthWay 2150 Commercial 50 LB Broadcast Fertilizer Spreader comes with a 5-Year Limited Warranty. EarthWay Products also offers lifetime technical support on all products to assist with any questions or issues you may encounter.

For additional support, you can refer to the official User Manual (PDF) available here.