Mad Catz Dual Force Racing Wheel & Pedals User Manual

1. Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Mad Catz Dual Force Racing Wheel and Pedals. Designed for use with PlayStation consoles, this accessory enhances your racing game experience by providing a realistic steering and pedal control interface. Please read this manual thoroughly before use to ensure proper functionality and longevity of your product.

2. Package Contents

Verify that all items listed below are present in your package:

• Mad Catz Dual Force Racing Wheel
• Mad Catz Pedal Unit (Accelerator and Brake)

Image: The Mad Catz Dual Force Racing Wheel and Pedals in its original packaging.

3. Setup Instructions

3.1 Connecting the Racing Wheel

1. Ensure your PlayStation console is powered off.
2. Locate the controller port on your PlayStation console.
3. Plug the racing wheel's connector cable firmly into an available controller port on your PlayStation.
4. Place the racing wheel on a stable, flat surface, such as a table or desk.

Image: The Mad Catz Dual Force Racing Wheel, showing its steering wheel, buttons, and D-pad.

3.2 Connecting the Pedal Unit

1. Locate the pedal unit connector port on the underside or rear of the racing wheel.
2. Plug the pedal unit's cable into this port.
3. Place the pedal unit on the floor in front of your seating position, ensuring it is stable and will not slide during use.

Image: The Mad Catz Pedal Unit, featuring accelerator and brake pedals.

4. Operating Instructions

4.1 Powering On and Game Start

1. After connecting the wheel and pedals, power on your PlayStation console.
2. Insert a compatible racing game disc into the console.
3. Start the game. The racing wheel should be automatically recognized as a controller.

4.2 Basic Controls

• Steering Wheel: Turn left or right to steer in-game.
• Pedals:
  • Left Pedal: Brake
  • Right Pedal: Accelerator
• Directional Pad (D-Pad): Located on the left side of the wheel, functions as standard directional input for menu navigation and in-game controls.
• Action Buttons: Standard PlayStation action buttons (Triangle, Circle, Cross, Square) are located on the wheel for in-game actions.
• Shoulder Buttons (L1, L2, R1, R2): Located on the top-rear of the wheel, these function as standard shoulder buttons.
• START/SELECT Buttons: Standard PlayStation START and SELECT buttons are present for game functions.

4.3 Analog/Digital Mode Switch

The racing wheel features an ANALOG/DIGITAL mode switch, typically located near the center of the wheel. This switch allows you to toggle between analog and digital control modes, depending on the game's requirements and your preference. Refer to your game's manual for optimal settings.

5. Maintenance

5.1 Cleaning

• Disconnect the racing wheel and pedal unit from the PlayStation console before cleaning.
• Use a soft, dry cloth to wipe down the surfaces of the wheel and pedals.
• For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the product.

5.2 Storage

When not in use, store the racing wheel and pedal unit in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the unit to prevent damage.

6. Troubleshooting

7. Specifications

• Model: Mad Catz Dual Force Racing Wheel & Pedals
• Compatibility: PlayStation consoles
• Item Weight: 7.2 pounds (approximately 3.27 kg)
• Package Dimensions: 13.4 x 12.1 x 10.8 inches (approximately 34 x 30.7 x 27.4 cm)
• ASIN: B00002CETN
• Brand: Mad Catz

Note: Specifications are subject to change without notice.

8. Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Mad Catz website. Keep your proof of purchase for warranty claims.

For further assistance, you may contact Mad Catz customer support directly through their official channels.