Werner AC10-20-02 Long Body Aluminum Ladder Jacks Instruction Manual

1. Product Overview

The Werner AC10-20-02 Long Body Aluminum Ladder Jacks are designed to create a stable work platform between two extension ladders. This system allows for the use of planks or stages up to 20 inches in width, providing a secure elevated workspace for various tasks. These ladder jacks are constructed from lightweight yet sturdy aluminum, ensuring durability and ease of handling.

This product is sold as a pair and features a platform clamp system to securely attach the stage to the ladder jacks, enhancing overall system stability.

Image 1.1: A pair of Werner AC10-20-02 Long Body Aluminum Ladder Jacks. These jacks are designed to attach to extension ladder rungs and support a work platform.

2. Safety Information

Read and understand all instructions and safety warnings before using this product. Failure to follow these instructions may result in serious injury or death.

• Compatibility: These ladder jacks are recommended for use exclusively with 300 lb Type IA and 375 lb Type IAA extension ladders. Do not use with ladders of lower duty ratings.
• Platform Placement: Always place ladder jacks approximately one foot (30 cm) from each end of the plank or stage.
• Secure Connection: Utilize the integrated platform clamp system to firmly secure the stage to the ladder jacks. This system helps tie the entire ladder jack system together for enhanced stability.
• Inspection: Before each use, inspect the ladder jacks, ladders, and stage for any damage, wear, or defects. Do not use damaged equipment.
• Level Surface: Ensure that the ladders are placed on a firm, level surface and are properly secured and angled according to the ladder manufacturer's instructions.
• Load Capacity: The overall load capacity of the work platform system is determined by the lowest rated component (ladders, stage, or ladder jacks). Always adhere to the load limits specified by the ladder and stage manufacturers.
• Stability: Never overreach or apply excessive side loads to the platform. Maintain a balanced position at all times.
• Weather Conditions: Avoid using ladder jacks in high winds, storms, or other adverse weather conditions.
• Personal Protective Equipment: Always wear appropriate personal protective equipment (PPE) when working at heights.

3. Package Contents

Verify that all components are present and undamaged upon opening the package:

• 1 Pair of Werner AC10-20-02 Long Body Aluminum Ladder Jacks

4. Setup and Installation

Follow these steps to properly set up your Werner AC10-20-02 Ladder Jacks:

1. Prepare Ladders: Position two compatible extension ladders (Type IA or IAA) on a firm, level surface. Ensure they are set up at the correct angle and secured to prevent movement, following the ladder manufacturer's guidelines.
2. Attach Ladder Jacks: Mount one ladder jack onto each extension ladder. The AC10-20-02 model is designed to attach to two rungs of the ladder. Ensure the jacks are securely seated on the rungs and oriented correctly to receive the stage. The jacks can be mounted on either side of the extension ladder.
3. Position Stage: Carefully place your work stage or plank onto the ladder jacks. The AC10-20-02 is designed to accept stages up to 20 inches in width. Ensure the stage extends approximately one foot (30 cm) beyond each ladder jack.
4. Secure Stage: Utilize the integrated platform clamp system on each ladder jack to firmly secure the stage to the jacks. Tighten all clamps to prevent any movement of the stage during use. This step is crucial for the stability of the entire system.
5. Final Check: Before stepping onto the platform, perform a thorough check of all connections. Verify that the ladders are stable, the ladder jacks are securely attached to the ladders, and the stage is firmly clamped to the ladder jacks.

5. Operating Instructions

Once the ladder jack system is properly set up and all safety checks are complete, the platform is ready for use. Always exercise caution and follow these guidelines:

• Ascend Safely: Use the ladders to safely ascend to the work platform. Always maintain three points of contact with the ladder.
• Maintain Balance: While on the platform, distribute your weight evenly and avoid sudden movements. Do not lean too far to one side or overreach.
• Tool Placement: Keep tools and materials organized on the platform to prevent tripping hazards or items falling.
• Descent: Safely descend from the platform using the ladders, maintaining three points of contact.

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your ladder jacks:

• Regular Inspection: Before and after each use, inspect the ladder jacks for any signs of damage, such as bends, cracks, loose fasteners, or corrosion. Pay close attention to the attachment points and clamping mechanisms.
• Cleaning: Clean the ladder jacks with a damp cloth to remove dirt, debris, or paint. Avoid using harsh chemicals that could damage the aluminum finish.
• Storage: Store the ladder jacks in a dry, clean environment, away from extreme temperatures and corrosive materials.
• Damaged Parts: If any part of the ladder jack is damaged or shows excessive wear, discontinue use immediately and replace the unit. Do not attempt to repair damaged components.

7. Troubleshooting

If you encounter issues during the setup or use of your Werner AC10-20-02 Ladder Jacks, consider the following:

• Instability: If the platform feels unstable, re-check all connections. Ensure the ladders are properly set up, the ladder jacks are fully seated on the rungs, and the stage clamps are tightened securely. Verify that the stage width does not exceed 20 inches.
• Difficulty Attaching: Ensure you are using compatible extension ladders (Type IA or IAA). The ladder jacks are designed for a two-rung attachment.
• Damaged Components: If any part of the ladder jack appears bent, cracked, or otherwise damaged, do not use the product. Contact Werner customer support for assistance.

8. Specifications

Note: Load capacity is determined by the lowest rated component of the entire system (ladders, stage, and ladder jacks). Always consult and adhere to the load ratings of your ladders and stage.

9. Warranty and Support

Warranty: This product is covered by a standard manufacturer's warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the documentation provided with your purchase or visit the official Werner website.

Customer Support: If you have any questions, require technical assistance, or need to report a warranty claim, please contact Werner customer service directly. Contact information can typically be found on the product packaging or the official Werner website.