1. Introduction
The Mad Catz MC2 Racing Wheel and Pedals Set is designed to enhance your racing game experience on PlayStation and PlayStation 2 consoles. This manual provides detailed instructions for setting up, operating, and maintaining your racing wheel and pedal unit.
Figure 1: Top-down view of the Mad Catz MC2 Racing Wheel and Pedals Set, showing the wheel unit, pedal unit, and connecting cables.
2. Key Features
- Realistic Racing Experience: Designed for immersive gameplay on PlayStation and PlayStation 2.
- Vibration Feedback: Provides tactile feedback for enhanced realism during gameplay.
- Accudrive System: Allows for adjustable wheel sensitivity to match various racing styles and game requirements.
- Programmable Buttons: Features 10 programmable action buttons for customized control.
- Multiple Control Modes: Supports Steering Wheel, Analog, and Digital control modes.
- Retractable Leg Supports: For stable placement on a lap or table.
- Integrated Pedal Unit: Includes accelerator and brake pedals for precise control.
3. Setup Instructions
3.1 Package Contents
Before proceeding, ensure all components are present:
- Mad Catz MC2 Racing Wheel Unit
- Mad Catz MC2 Pedal Unit
- User Manual (this document)
3.2 Connecting the Racing Wheel
- Ensure your PlayStation or PlayStation 2 console is powered off.
- Locate an available controller port on your console.
- Plug the racing wheel's connector cable into the chosen controller port on your console. Ensure a firm connection.
3.3 Connecting the Pedal Unit
- Locate the pedal unit's connector cable.
- Plug this cable into the designated port on the underside or rear of the racing wheel unit. This port is typically labeled "Pedals" or has a pedal icon.
- Ensure the connection is secure.
Figure 2: The Mad Catz MC2 Racing Wheel and Pedals Set, showing the wheel, pedal unit, and an optional shifter component.
3.4 Securing the Racing Wheel
- For Lap Use: Extend the retractable leg supports located on the underside of the wheel unit. Place the wheel comfortably on your lap.
- For Table Use: The wheel unit may include suction cups or clamps for securing it to a flat surface. Ensure these are properly engaged for stability during use.
3.5 Powering On
Once all connections are secure and the wheel is positioned, power on your PlayStation or PlayStation 2 console. The racing wheel should be detected automatically.
4. Operating Instructions
4.1 Basic Controls
- Steering Wheel: Turn left or right to control vehicle direction.
- Accelerator Pedal: Press down to increase vehicle speed.
- Brake Pedal: Press down to decrease vehicle speed or stop.
- Action Buttons: Use the 10 programmable buttons for in-game actions as assigned.
4.2 Accudrive System (Wheel Sensitivity)
The Accudrive system allows you to adjust the sensitivity of the steering wheel. Refer to your game's options menu or the wheel's specific controls (if available) to fine-tune this setting. Higher sensitivity means smaller wheel movements result in larger in-game steering changes, suitable for tight turns. Lower sensitivity requires larger wheel movements for the same in-game effect, offering more precise control for wide turns.
4.3 Programmable Buttons
The MC2 Racing Wheel features 10 programmable action buttons. Consult your game's control settings to assign specific in-game functions to these buttons. Some games may offer direct mapping within their options, while others might require using the wheel's internal programming mode (if applicable, refer to the original full manual for specific button programming sequences).
4.4 Control Modes
The wheel supports three control modes: Steering Wheel, Analog, and Digital. These modes determine how the console interprets your inputs. Typically, the "Steering Wheel" mode is the default and most appropriate for racing games. If you experience unexpected behavior, check your console's accessory settings or the game's control options to ensure the correct mode is selected.
4.5 Vibration Feedback
The vibration feedback feature provides immersive sensations, such as road bumps, collisions, and engine rumble. This feature is automatically enabled when supported by the game. If vibration feedback is not working, ensure it is enabled in the game's options menu and that the wheel is securely connected to the console.
5. Maintenance
- Cleaning: Use a soft, dry cloth to wipe down the racing wheel and pedal unit. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
- Storage: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. Coil cables neatly to prevent tangling or damage.
- Cable Care: Avoid sharply bending or pulling on the cables, as this can damage internal wiring.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Wheel or Pedals not responding. | Loose cable connection; incorrect console port; console not powered on. |
|
| Vibration feedback is not working. | Game does not support vibration; vibration disabled in game settings; loose connection. |
|
| Wheel sensitivity feels off. | Accudrive system setting needs adjustment; game sensitivity settings. |
|
| Programmable buttons not functioning. | Buttons not programmed; game does not recognize custom mapping. |
|
7. Specifications
- Model Number: sluh-00061
- Compatible Consoles: Sony PlayStation, Sony PlayStation 2
- Product Dimensions: 16.8 x 16.2 x 10.5 inches (approximate)
- Item Weight: 3.5 pounds (approximate)
- Manufacturer: MadCatz
8. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Mad Catz website. Keep your proof of purchase for warranty claims.
Note: Product specifications and features are subject to change without notice.
