LED DISK LIGHT
| Catalog number | |
| Notes | |
| Type |
ASD-LDS-4D1030-WH-6PACK LED Disk Light
- DESIGN – LED DISK LIGHT with a classic, low-profile design is an ideal solution for low ceilings. The acrylic lens with a 120° beam angle grants you even light distribution. With 2.5kV surge protection, it is designed to operate on 120V circuits.
- MOTION SENSOR – The built-in motion sensor turns off the fixture automatically when no motion is detected.
- COLOR SELECTABLE – You can choose either a 2,700K soft white, 3,000K warm white, 3,500K neutral white, 4,000K cool white, or 5,000K daylight color temperature.
- CRI90+ rating provides rich and natural colors and keeps your space looking and feeling vibrant. True bright colors also improve your mood and general health.
- DIMMING – Smooth triac dimming capabilities ranging from 10% to 100% with modern LED dimmers allow you to control the look and feel of your space.
- INSTALLATION – The fixture can be installed on either an existing outlet box or a remodeled can by using a retrofit kit with universal TP24 or E26 connectors. 2.75″, 3.5″ and 4″ mounting holes help you expand your installation options. It is also Wet Locations rated.
- ADVANTAGES – With a lifespan of 50,000 hours, these fixtures are made to last decades under normal operation! ASD provides a 5-year limited warranty along with ETL and Energy Star certifications to guarantee top quality products and safety!
| Model | Size | Watts | Voltage | Dimmable | Lumens | CCT | Finish | Dimensions (LxH) | Option |
| ASD-LDS-4D1030-WH-6PACK | 4 inch | 10W | 120 V | TRIAC | 650 lm | 3,000 K | White | 5-7/8″ x 7/8″ | – |
| ASD-LDS-4D1040-WH-6PACK | 4 inch | 10W | 120 V | TRIAC | 650 lm | 4,000 K | White | 5-7/8″ x 7/8″ | – |
| ASD-LDS-4D1050-WH-6PACK | 4 inch | 10W | 120 V | TRIAC | 650 lm | 5,000 K | White | 5-7/8″ x 7/8″ | – |
| ASD-LDS-6D1530-WH-6PACK | 6 inch | 15W | 120 V | TRIAC | 1,200 lm | 3,000 K | White | 7-5/16″ x 15/16″ | – |
| ASD-LDS-6D1530-WH-12PACK | 6 inch | 15W | 120 V | TRIAC | 1,200 lm | 3,000 K | White | 7-5/16″ x 15/16″ | – |
| ASD-LDS-6D1540-WH-6PACK | 6 inch | 15W | 120 V | TRIAC | 1,300 lm | 4,000 K | White | 7-5/16″ x 15/16″ | – |
| ASD-LDS-6D1540-WH-12PACK | 6 inch | 15W | 120 V | TRIAC | 1,300 lm | 4,000 K | White | 7-5/16″ x 15/16″ | – |
| ASD-LDS-6D1550-WH-6PACK | 6 inch | 15W | 120 V | TRIAC | 1,300 lm | 5,000 K | White | 7-5/16″ x 15/16″ | – |
| ASD-LDS-6D1550-WH-12PACK | 6 inch | 15W | 120 V | TRIAC | 1,300 lm | 5,000 K | White | 7-5/16″ x 15/16″ | – |
| LDS-MS WITH MOTION SENSOR | |||||||||
| ASD-LDS-6N15AC-MS-WH-6PACK | 6 inch | 15W | 120 V | – | 1,050/1,121/1,135/1,149/1,134 lm | 5CCT (2,700/3,000/3,500/4,000/5,000 K) | White | 7-5/16″ x 1-1/4″ | Motion sensor |
| ASD-LDS-6N15AC-MS-BK-6PACK | 6 inch | 15W | 120 V | – | 1,050/1,121/1,135/1,149/1,134 lm | 5CCT (2,700/3,000/3,500/4,000/5,000 K) | Black | 7-5/16″ x 1-1/4″ | Motion sensor |
PRODUCT SPECIFICATIONS:
| Construction & Materials | ||||||
| Housing | Iron | |||||
| Diffuser | Acrylic | |||||
| Finish | White, Black | |||||
|
Weight |
ASD-LDS-4D1030-WH-6PACK |
2.8 lbs (1.3 kg) |
ASD-LDS-6D1530-WH-6PACK | 3.5 lbs (1.6 kg) | ASD-LDS-6D1550-WH-6PACK | 3.5 lbs (1.6 kg) |
| ASD-LDS-4D1040-WH-6PACK | ASD-LDS-6D1530-WH-12PACK | 7.3 lbs (3.3 kg) | ASD-LDS-6D1550-WH-12PACK | 7.3 lbs (3.3 kg) | ||
| ASD-LDS-4D1050-WH-6PACK | ASD-LDS-6D1540-WH-6PACK | 3.5 lbs (1.6 kg) | ASD-LDS-6N15AC-MS-WH-6PACK | 5.3 lbs (2.4 kg) | ||
| ASD-LDS-6D1540-WH-12PACK | 7.3 lbs (3.3 kg) | ASD-LDS-6N15AC-MS-BK-6PACK | ||||
| Environmental system | ||||||
| Work environment | Suitable for Wet Locations | |||||
| Operating temperature | -4℉ to 104℉ (-20℃ to 40℃) | |||||
| L-70 Life | > 50,000 hrs | |||||
| Optical system | ||||||||||||
|
Luminous flux |
ASD-LDS-4D1030-WH-6PACK |
650 lm |
ASD-LDS-6D1530-WH-6PACK | 1,200 lm | ASD-LDS-6D1550-WH-6PACK | 1,300 lm | ||||||
| ASD-LDS-4D1040-WH-6PACK | ASD-LDS-6D1530-WH-12PACK | ASD-LDS-6D1550-WH-12PACK | ||||||||||
| ASD-LDS-4D1050-WH-6PACK | ASD-LDS-6D1540-WH-6PACK | 1,300 lm | ASD-LDS-6N15AC-MS-WH-6PACK | 1,050/1,121/1,135/1,149/1,134 lm | ||||||||
| ASD-LDS-6D1540-WH-12PACK | ASD-LDS-6N15AC-MS-BK-6PACK | |||||||||||
| Color temperature | 3,000 K; 4,000 K; 5,000 K | |||||||||||
| 5CCT switch (2,700/3,000/3,500/4,000/5,000 К), 3,000 K by default | ||||||||||||
| CRI | > 90 | |||||||||||
| Electrical system | ||||||||||||
| Input voltage | 120 V | |||||||||||
|
Max input current |
ASD-LDS-4D1030-WH-6PACK |
0.1 A |
ASD-LDS-6D1530-WH-6PACK |
0.15 A |
ASD-LDS-6D1550-WH-6PACK | 0.15 A | ||||||
| ASD-LDS-4D1040-WH-6PACK | ASD-LDS-6D1530-WH-12PACK | ASD-LDS-6D1550-WH-12PACK | ||||||||||
| ASD-LDS-4D1050-WH-6PACK | ASD-LDS-6D1540-WH-6PACK | ASD-LDS-6N15AC-MS-WH-6PACK | 0.13 A | |||||||||
| ASD-LDS-6D1540-WH-12PACK | ASD-LDS-6N15AC-MS-BK-6PACK | |||||||||||
| Inrush current (Action time) | 0.2 A (0.01 S) | for MS model: 42 A (0.02 S) | ||||||||||
| Off state power | 0W | |||||||||||
|
Power consumption |
ASD-LDS-4D1030-WH-6PACK |
10W |
ASD-LDS-6D1530-WH-6PACK |
15W |
ASD-LDS-6D1550-WH-6PACK |
15W |
||||||
| ASD-LDS-4D1040-WH-6PACK | ASD-LDS-6D1530-WH-12PACK | ASD-LDS-6D1550-WH-12PACK | ||||||||||
| ASD-LDS-4D1050-WH-6PACK | ASD-LDS-6D1540-WH-6PACK | ASD-LDS-6N15AC-MS-WH-6PACK | ||||||||||
| ASD-LDS-6D1540-WH-12PACK | ASD-LDS-6N15AC-MS-BK-6PACK | |||||||||||
| Power factor | > 0.9 | |||||||||||
| Output voltage | 132 V | |||||||||||
|
Max output current |
ASD-LDS-4D1030-WH-6PACK |
0.067 A |
ASD-LDS-6D1530-WH-6PACK |
0.65 A |
ASD-LDS-6D1550-WH-6PACK | 0.65 A | ||||||
| ASD-LDS-4D1040-WH-6PACK | ASD-LDS-6D1530-WH-12PACK | ASD-LDS-6D1550-WH-12PACK | ||||||||||
| ASD-LDS-4D1050-WH-6PACK | ASD-LDS-6D1540-WH-6PACK | ASD-LDS-6N15AC-MS-WH-6PACK | 0.1 A | |||||||||
| ASD-LDS-6D1540-WH-12PACK | ASD-LDS-6N15AC-MS-BK-6PACK | |||||||||||
| Surge protection DM/CM | 2.5 kV / 2.5 kV | |||||||||||
| Dimming range |
PACKAGE CONTENTS: A
B C D |
|||||||||||
| 10-100% | ||||||||||||
| Dimming compatible controls * | ||||||||||||
| Brand | Lutron | Leviton | ||||||||||
|
Models |
DVW-603PGH-WH | DVLV-603P-IV | S-600P | 0B33K1 | 6674 | |||||||
| MACL-153M-WH | CTCL-153PDH | S-603P | 6633-P | 6672 | ||||||||
| DVCL-153P-WH | CT-603PG | 1E1205 | 6631 | |||||||||
| SLV-600P-WH | DV-600P | 1F4205 | ||||||||||
| Regular and voluntary certifications | ||||||||||||
| 5-year limited warranty | ||||||||||||
| Energy Star listed | ||||||||||||
| cETLus certified 4008281 | UL certified E473804 (for MS models) | |||||||||||
| Title 24 JA8-2022 compliant | ||||||||||||
* The list of dimmers is relevant for models without a motion sensor.
PACKAGE CONTENTS:
| Description | Q-ty |
| LED Disk Light | 6 (12 for 12 pack) |
| Crossbar (A) only for 4″ models | 1 |
| Wire nut (B) | 3 |
| 1-1/2″ screw (C) | 2 |
| 1/2″ screw (D) | 2 |
| Box | 1 |
ACCESSORIES (sold separately):
ACCESSORY COMPATIBILITY LIST:
| Accessories
Models |
Retrofit kit with E26 base and TP24 connector
for LED Disk Light 4″ ASD-RK4-LDS ASD-RK4-LDS-6PACK |
Retrofit kit with E26 base and TP24 connector
for LED Disk Light 6″ ASD-RK6-LDS ASD-RK6-LDS-6PACK |
| ASD-LDS-4D1030-WH-6PACK | ● | |
| ASD-LDS-4D1040-WH-6PACK | ● | |
| ASD-LDS-4D1050-WH-6PACK | ● | |
| ASD-LDS-6D1530-WH-6PACK | ● | |
| ASD-LDS-6D1530-WH-12PACK | ● | |
| ASD-LDS-6D1540-WH-6PACK | ● | |
| ASD-LDS-6D1540-WH-12PACK | ● | |
| ASD-LDS-6D1550-WH-6PACK | ● | |
| ASD-LDS-6D1550-WH-12PACK | ● | |
| ASD-LDS-6N15AC-MS-WH-6PACK | ● | |
| ASD-LDS-6N15AC-MS-BK-6PACK | ● |
INSTALLATION GUIDE
IMPORTANT SAFETY INFORMATION:
Please read all the instructions below before installation.
- Make sure that the supply voltage corresponds to the rated product voltage.
- The product must be installed by a qualified electrician in accordance with the National Electrical Code and corresponding local codes.
- If the product is damaged, do not use it.
WARNING
RISK OF PERSONAL INJURY – READ and follow all WARNINGS and
installation instructions. Keep or give to the owner for future reference.
Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product.
Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Risk of Fire: Minimum 194°F supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
ASD® assumes no responsibility for claims arising out of improper or careless Installation or handling of this product.
ELECTRICAL SCHEMATIC DIAGRAM:
JUNCTION BOX INSTALLATION 4”:
- Remove the Lens by turning it counter clockwise.
- Attach the crossbar to the outlet box using two screws. Insert another two screws into the crossbar. Connect the wires: Black to Black, White to White, Green to Green. Secure the connection with wire nuts. Tuck all the wires into the outlet box.
- Attach the fixture to the crossbar by feeding screws through the keyhole slots and then tighten the screws in the narrow end of the keyhole slots. Do not over tighten. Place the Lens back and turn it clockwise to fix.
BUILT-IN MOTION SENSOR INFORMATION
- The light is ON for 12 sec., after you turn ON the power.
- The light is ON when movement is detected.
- After last detection the lights remains ON for 1/5/10 min. as prefer.
- After stand-by period, light turns OFF automatically.
JUNCTION BOX INSTALLATION 6”:
- Remove the Lens by turning it clockwise.
- Insert two screws into the outlet box. Connect the wires: Black to Black, White to White, Green to Green. Secure the connection with wire nuts. Tuck all the wires into the outlet box.
- Attach the fixture to the outlet box by feeding screws through the keyhole slots and then tighten the screws in the narrow end of the keyhole slots. Do not over tighten. Place the Lens back and turn it counter clockwise to fix.
JUNCTION BOX INSTALLATION 6” WITH MS:
- Remove the Lens by turning it counter clockwise. Choose preferred color temperature by adjusting the switch position. Choose preferred motion sensor settings.
- Insert two screws into the outlet box. Connect the wires: Black to Black, White to White, Green to Green. Secure the connection with wire nuts. Tuck all the wires into the outlet box.
- Attach the fixture to the outlet box by feeding screws through the keyhole slots and then tighten the screws in the narrow end of the keyhole slots. Do not over tighten. Place the Lens back and turn it clockwise to fix.
RECESSED CAN INSTALLATION 4″
ASD-RK4-LDS
sold separately:
- Remove the existing fixture. Remove the Lens by turning it counter clockwise.
Attach remodeled clips. Secure with screws and nut. Place the Lens back and turn it clockwise. - Link TP24 connector with the fixture wires. Connect the E26 Adapter and thread it into the socket of the recessed Can or connect it with TP24 of the recessed Can directly.
- Carefully route wires, and push fixture up to ceiling surface.
RECESSED CAN INSTALLATION 6″
ASD-RK6-LDS
sold separately:
- Place the spring clip arms into the rectangular slots and twist them in a locked position. The spring clips must be adjusted depending on the Can size.
- Link TP24 connector with the fixture wires. Connect the E26 Adapter and thread it into the socket of the recessed Can or connect it with TP24 of the recessed Can directly.
- Squeeze the two sets of spring clip arms up towards each other. Carefully route wires into the Can, and hook both sets of spring clip arms into the arm hooks on the inside wall of the Can. Release spring clip arms and gently push the Disk Light up into the Can until flush against the ceiling surface.
ORDERING INFORMATION
| Model | UPC | Pcs. per carton | Carton size | Carton weight | GTIN 14 |
| ASD-LDS-4D1030-WH-6PACK | 810050738606 | 2 | 13.4″ x 6.9″ x 7.5″ | 6.8 lbs | 10810050738603 |
| ASD-LDS-4D1040-WH-6PACK | 810050738521 | 2 | 13.4″ x 6.9″ x 7.5″ | 6.8 lbs | 10810050738528 |
| ASD-LDS-4D1050-WH-6PACK | 810050738538 | 2 | 13.4″ x 6.9″ x 7.5″ | 6.8 lbs | 10810050738535 |
| ASD-LDS-6D1530-WH-6PACK | 810050737401 | 2 | 16.3″ x 8.9″ x 6.9″ | 8.2 lbs | 10810050737408 |
| ASD-LDS-6D1530-WH-12PACK | 810050737821 | 1 | 15.4″ x 6.1″ x 8.1″ | 7.9 lbs | – |
| ASD-LDS-6D1540-WH-6PACK | 810050737418 | 2 | 16.3″ x 8.9″ x 6.9″ | 8.2 lbs | 10810050737415 |
| ASD-LDS-6D1540-WH-12PACK | 810050738774 | 1 | 15.4″ x 6.1″ x 8.1″ | 7.9 lbs | – |
| ASD-LDS-6D1550-WH-6PACK | 810050737425 | 2 | 16.3″ x 8.9″ x 6.9″ | 8.2 lbs | 10810050737422 |
| ASD-LDS-6D1550-WH-12PACK | 810128111515 | 1 | 15.4″ x 6.1″ x 8.1″ | 7.9 lbs | – |
| LDS-MS WITH MOTION SENSOR | |||||
| ASD-LDS-6N15AC-MS-WH-6PACK | 810050738576 | 2 | 16.1″ x 9.1″ x 9.1″ | 12.1 lbs | 10810050738573 |
| ASD-LDS-6N15AC-MS-BK-6PACK | 810128111539 | 2 | 16.1″ x 9.1″ x 9.1″ | 12.1 lbs | 10810128111529 |
ACCESSORIES:
| Model | Description | Weight | UPC | |||||
| ASD-RK4-LDS | Retrofit kit with E26 base and TP24 connector for LED Disk Light 4″ | 0.1 lbs | 810050730105 | |||||
| ASD-RK4-LDS-6PACK | Retrofit kit with E26 base and TP24 connector for LED Disk Light 4″ 6 pack | 0.5 lbs | 810050739375 | |||||
| ASD-RK6-LDS | Retrofit kit with E26 base and TP24 connector for LED Disk Light 6″ | 0.1 lbs | 810050730112 | |||||
| ASD-RK6-LDS-6PACK | Retrofit kit with E26 base and TP24 connector for LED Disk Light 6″ 6 pack | 0.5 lbs | 810050738897 | |||||
| Model | Pcs. in middle box | Middle box size | Middle box weight | GTIN 14 middle box | Pcs. per carton | Carton size | Carton weight | GTIN 14 in carton |
| ASD-RK4-LDS | 12 | 5.2″ x 4.3″ x 5.2″ | 1.1 lbs | 10810050730102 | 72 | 11.4″ x 11.2″ x 6.1″ | 7.3 lbs | 20810050730109 |
| ASD-RK4-LDS-6PACK | – | – | – | – | 8 | 12.2″ x 10.4″ x 5.5″ | 4.6 lbs | 10810050739372 |
| ASD-RK6-LDS | 12 | 7.5″ x 3.5″ x 7.5″ | 1.2 lbs | 10810050730119 | 48 | 14.6″ x 8.1″ x 8.1″ | 5.5 lbs | 20810050730116 |
| ASD-RK6-LDS-6PACK | – | – | – | – | 8 | 15.6″ x 8.7″ x 8.1″ | 6 lbs | 10810050738894 |
For most up-to-date spec sheets please refer to asd-lighting.com
ASD LIGHTING CORP
E-mail: orders@asd-lighting.com
Web site: www.asd-lighting.com
Documents / Resources
 |
ASD ASD-LDS-4D1030-WH-6PACK LED Disk Light [pdf] Installation Guide ASD-LDS-4D1030-WH-6PACK LED Disk Light, ASD-LDS-4D1030-WH-6PACK, LED Disk Light, Disk Light, Light |
