artopex 2025 E-Motion Adjustable Table
Specifications
- Product Name: E-motion Adjustable Table
- Mechanisms: 2- & 3-leg
- Effective Date: September 22, 2025
- Power Requirement: 110v
- Manufacturer Contact: 1 800 378-0189, Email: sac@artopex.com
Setup
Caution
SETUP AND INSTALLATION
- Once the table has been assembled, adjust the feet so that the table is level and does not shift its position. After this, connect the table to a 110v wall outlet, the table will be ready for use.
- Check that no cables can get tangled.
- Choose a placement for the table that’s a safe distance from window frames, radiators, furniture, etc.
- Do not place any abjects that are taller than 500 mm (20″) under the table. After it has been assembled, when moving the table, DO NOT lift the table by the tabletop. Lifting this way can stress the fasteners connecting the table base to the table top. Lower the table completely and lift the table by grabbing the top of the table base or by removing the table top first.
SAFETY AND WARNINGS
- This table height is adjustable so that it can be positioned at the most ergonomically suitable height. These tables are designed only for the purposes included in this manual. They should not be used in environments with high humidity or dampness. Any other use is at the user’s risk.
- Do not move around, crawl or lie under the table frame. Do not sit or stand on the table frame.
- Liability: Under no circumstances does the manufacturer accept warranty claims or liability claims for damages caused by improper use handling of the table frame other than that which is described in this operation manual.
Safety & Warnings
Caution
SAFETY AND WARNINGS
- lnappropriate use of this product may cause property or bodily injury. Make sure that children, pets, etc. stay away from the table when it is in operation.
- Check the surroundings on all sides before using the table. Make sure the table does not come in contact with the wall.
- Please unplug the power supply during lightning episodes and when the product is not in use for a long time.
- Make sure NO obstacles are in the table’s path and no obstacles higher than 500 mm are under the table. Body parts and property can be crushed if trapped between an immobile obstacle and the table’s range of motion.
- Keep the work environment temperature between 0°C and 40°C.
- Ensure the length of the power cords is accounted for when operating the table. Monitors, computers, speakers, and anything with a cord that is not long enough for the desk’s range of motion couId be pulled down or have its wires sectioned. Items pulled off the table may cause other items to fall.
- lt is strictly forbidden to disassemble the product without permission, in order to prevent the product from malfunctioning and electronic products from causing harm to the user.
- Please provide this operation to any users, installers, or support personnel operating the product. Read relevant operating instructions before using. Artopex does not take any responsibility for product damage and user injury caused by the abnormal operation.
USAGE
- This table height is adjustable so that it can be positioned at the most ergonomically suitable height. These tables are designed only for the purposes included in this manual. They should not be used in environments with high humidity or dampness. Any other use is at the user’s risk.
- Do not move around, crawl or lie under the table frame. Do not sit or stand on the table frame. Children should never use the table unless they are supervised by adults.
- Liability: Under no circumstances does the manufacturer accept warranty claims or liability claims for damages caused by improper use handling of the table frame other than that which is described in this operation manual.
Reset

Reset upwards
When the system is abnormal, or the screen displays “RST”, the table needs to be reset.
Press and hold the ”
” key to raise the table to the highest position, release and press the “
” key until the screen displays “RST” and a beep sound is heard, and the display shows “49.0”.
Release the “
” button, the reset is successful at this time, the table can be used normally.
Reset downwards
When the system is abnormal, or the screen displays “RST”, the lifting table needs to be reset.
Press and hold the “
” key to lower the table to the lowest height, release and press the ”
” key until the screen displays “RST” and a beep sound is heard, and the screen displays “23.0”.
Release the “
” key, the reset is successful at this time, the table can be used normally.
Note: During all reset processes, the anti-collision system will fail. Please ensure that there are no obstacles near the table during the reset process to prevent collisions.
Raise or lower the surface
Press “
” key to adjust ascending height freely.
Press “
” key to adjust descending height freely.
Height position memory settings
Ascend or descend to your desired height.
Press and hold the “M” key until show “S-“
Press the “1” key to complete the setting of the first memory. Duplicate the process for positions 2, 3 & 4 if desired.
Anti-collision protection
- When the tabletop encounters an obstacle in the process of ascending or descending, it will immediately move in the opposite direction. The tabletop moves in reverse for some distance and works normally after removing the obstacle.
Locking and unlocking Child lock
Locking: Hold simultaneously
for 5 seconds. When the screen displays “Loc”, it indicates that the system has been locked. Operation of the system will not be possible.
Unlocking: Hold simultaneously
for 5 seconds. The screen will display the normal digital information, indicating that the system has been unlocked.
Error codes (Two-leg table)
| Code / Display | Meaning | Solution |
|---|---|---|
![]() |
High power temperature | Wait for 18 minutes or unplug the table for 15 seconds then plug it back in. |
![]() |
Internal error in the control unit | Unlock the table by pressing the up and down buttons simultaneously until the “LOC” message disappears. |
![]() |
Bad connection | Check that the keypad and control box are properly connected. If the error persists, change the control box. |
| Blank screen | No connection | Check that the power cable is connected to a wall outlet. Check all cables. |
| E4 | Keypad communication error | Check the keypad connection cable. |
| E6 | Failure of main power start | Replace the main power supply or check the main power connection. |
| E7 | Protection while main power is running | Power up again. |
| E8 | Tilt while the table top is running | Reset. |
| E11–E28 | Defective control box or lift column | STEP 1: Switch motor cable connection M1 and M2. STEP 2: If error still shows: • If code is the same → Replace control box. • If code changes (e.g., E21 → E11) → Replace lift column. STEP 3: Identify which lift column to replace: • E11–E18: Column connected to M1. • E21–E28: Column connected to M2. |
| E36 | Motor 3 shutoff | Reset. |
| E42 | Memory error | Replace keypad. |
| E43 | Stop sensor error | Replace keypad. |
Error codes (Three-leg table)
| Code / Display | Meaning | Solution |
|---|---|---|
![]() |
High power temperature | Wait for 18 minutes or unplug the desk for 15 seconds then plug it back in. |
![]() |
Internal error in the control unit | Unlock the table by pressing the up and down buttons simultaneously until the “LOC” message disappears. |
![]() |
Bad connection | Check that the keypad and control box are properly connected. If the error message still appears, change the control box. |
| Blank screen | No connection | Check that the power cable is connected to a wall outlet. Check that all the cables are properly connected. |
| E4 | Keypad communication error | Check the keypad connection cable. |
| E6 | Failure of main power start | Replace the main power supply or check the main power connection. |
| E7 | Protection while main power is running | Power up again. |
| E8 | Tilt while the table top is running | Reinitialization. |
| Code Range | Meaning | Steps / Solution |
|---|---|---|
| E11–E28 | Defective control box or lift column | STEP 1: Switch the motor cable connection M1 and M2. STEP 2: See the error code again. A. If the code is the same → Replace the control box. B. If the code changes (e.g., E21 → E11) → Replace the lift column. STEP 3: Confirm which lift column needs replacing: A. E11–E18 = Column connected to M1. B. E21–E28 = Column connected to M2. |
| Code Range | Meaning | Steps / Solution |
|---|---|---|
| E31–E38 | Defective control box or lift column | STEP 1: Switch the motor cable connection M2 and M3. STEP 2: See the error code again. A. If the code is the same → Replace the control box. B. If the code changes (e.g., E21 → E31) → Replace the lift column. STEP 3: Confirm which lift column needs replacing: A. E21–E28 = Column connected to M2. B. E31–E38 = Column connected to M3. |
| Code | Meaning | Solution |
|---|---|---|
| E42 | Memory error | Replacement of keypad. |
| E43 | Stop sensor error | Replacement of keypad. |
FAQs
Q: Can children use the table unsupervised?
A: No, children should always be supervised by adults when using the table.
Q: What should I do if the screen displays RST?
A: Follow the reset instructions provided in the manual to reset the table to its normal function.
Documents / Resources
![]() | 2025 E-Motion Adjustable Table |
References
- User Manualmanual.tools
Published: December 2, 2025
Updated: December 3, 2025





