M205160 Algoritmo System for Projectors Structural Modules Suspension
Product Information
Specifications
- Product Name: Algoritmo System for projectors Structural
modules suspension, ceiling, wall – 2368mm Gloss anodized - Designed by: Carlotta de Bevilacqua Paola di Arianello
- Dimensions: Length 2360 mm
- Product Code: M205160
Product Usage Instructions
Suspension Kit with Power Supply (MV)
This kit is designed to power fluorescent modules, white LED
plates, and accent modules. It includes a single steel suspension
cable and a power supply cable with a length of 2 meters. The cable
specifications are MV (5×1.5mm2+2×0.5mm2).
Linear Connector
The linear connector, product code M189000, is used to connect
different modules in the system seamlessly.
Suspension Kit with Power Supply (LV)
This kit is specifically for supplying LED modules RGB. It
includes a single steel suspension cable and a power supply cable
with a length of 2 meters. The cable specifications are LV
(3×1.5mm2).
Steel Suspension Cable with Quick Adjustment
This cable is 2 meters in length and allows for quick adjustment
to suspend the modules at the desired height.
End Caps
The set of 2 glossy anodized end caps, product code M188860,
provide a sleek finish to the installation.
Wall Bracket
The wall bracket, product code M199400, is used to mechanically
connect a wall-mounted module securely.
Bracket for Fixing to Wall/Ceiling
The bracket, product code M199300, is ideal for fixing the
system to the wall or ceiling as needed.
FAQ
Q: Can I use the suspension kit for both fluorescent and LED
modules?
A: No, there are specific kits designed for each type of module.
The MV kit is for fluorescent modules, white LED plates, and accent
modules, while the LV kit is for LED modules RGB.
Q: How do I adjust the height of the suspended modules using
the steel suspension cable?
A: The steel suspension cable with quick adjustment allows you
to easily change the height of the suspended modules by following
the provided instructions for adjustment.
Algoritmo System for projectors Structural modules suspension, ceiling, wall – 2368mm Gloss anodized
Carlotta de Bevilacqua Paola di Arianello
DESCRIPTION
A modular system for ceiling or wall-recessed installation, to be installed as a continuous line or with angles, composed of structural modules in extruded aluminium, of pre-wired gear plates with through-wiring and quick-connection system of optics systems and components for connecting, fixing, joining or finishing the system. The prewired LED plates were designed for diffused emission, wall washer light, prismoptic or controlled emission, for projectors integration (PAD or Cube 37), for 3 phase track alimentation. Complies with standard EN60598-1 and any other specific standard.
CARACTÈRISTIQUES
–Code Produit : M205160 –Couleur: Gloss anodised –Installation: Applique, Suspension, Plafonnier –Matériaux: Aluminium Extrudé –Séries: Architectural Indoor –dessiné par: Carlotta de Bevilacqua, Paola di
Arianello
DIMENSIONS
–Longueur : 2360 mm
Nous nous réservons le droit de modifier les spécifications de notre produit. — Last update: septembre 2023 Pour les dernières informations sur le produit, visitez www.artemide.com
PRODUCT DATA SHEET
PRODUCT CODE: M205160
ACCESSOIRES Suspension kit with power supply. Includes 1 single steel suspension cable + 1 power supply cable Length 2 meters. MV (5×1,5mm2+2×0,5mm2) To power fluorescent modules, white LED plates and accent modules. M189300
Linear connector M189000
Suspension kit with power supply. Includes 1 single steel suspension cable + 1 power supply cable Length 2 meters. LV (3×1,5mm2) For supplying LED modules RGB. M189200
90° joint to mechanically connect two recessed modules on one same plane – 0.30 kg – Gloss anodised (To be ordered with kit cover angle cod. AE44001 / AE44004) M196860
Steel suspension cable with quick adjustment Length 2 meters M189100
End caps (set of 2) glossy anodised M188860
Bracket for fixing to wall/ceiling (1 piece) M199400
90° angle to mechanically connect of 2 modules on perpendicular planes. Includes through-wire extensions. 0.60 kg. glossy anodised M196760
Wall bracket To mechanically connect a wallmounted module. M199300
Nous nous réservons le droit de modifier les spécifications de notre produit. — Last update: septembre 2023 Pour les dernières informations sur le produit, visitez www.artemide.com
Documents / Resources
 |
Artemide M205160 Algoritmo System for Projectors Structural Modules Suspension [pdf] Instructions M205160, M189300, M189000, M205160 Algoritmo System for Projectors Structural Modules Suspension, M205160, Algoritmo System for Projectors Structural Modules Suspension, Projectors Structural Modules Suspension, Structural Modules Suspension, Modules Suspension |