Artemide 4566830 Algoritmo System LED Lighting Instruction Manual

4566830 Algoritmo System LED Lighting

Product Information

Specifications

  • Product Name: Algoritmo System for projectors – PreWired gear
    for PAD and PAD Square Direct + indirect emission LED 4000K
    DALI
  • Designers: Carlotta de Bevilacqua, Paola di Arianello
  • IP Rating: IP40
  • Light Source: LED 4000K DALI
  • Dimmable: Yes
  • Allows installation and supplying of 1 to 4 PAD 230V
    projectors
  • MV through-wiring included
  • Upper screen in PMMA included for double emission version
  • PAD projectors need to be ordered separately

Product Usage Instructions

Installation

  1. Ensure the power source is switched off before
    installation.
  2. Mount the Algoritmo System in the desired location securely
    using appropriate fixtures.
  3. Connect the PAD projectors (ordered separately) to the system
    as per the provided wiring instructions.
  4. If using the double emission version, attach the upper screen
    in PMMA.

Operation

To operate the system:

  1. Turn on the power source.
  2. Use the DALI dimming controls to adjust the brightness of the
    LED projectors.

Dimensions

Please refer to the product data sheet for detailed dimensions
and measurements.

Product Data Sheet

Product Code: M2945N01

FAQ

Q: Can I install more than 4 PAD projectors with this
system?

A: No, this system is designed to accommodate 1 to 4 PAD 230V
projectors only.

“`

Algoritmo System for projectors – PreWired gear for PAD and PAD Square Direct + indirect emission LED 4000K DALI
Carlotta de Bevilacqua Paola di Arianello
DESCRIPTION
A modular system for ceiling or wall-recessed installation, to be installed as a continuous line or with angles, composed of structural modules in extruded aluminium, of pre-wired gear plates with through-wiring and quick-connection system of optics systems and components for connecting, fixing, joining or finishing the system. The prewired LED plates were designed for diffused emission, wall washer light, prismoptic or controlled emission, for projectors integration (PAD or Cube 37), for 3 phase track alimentation. Complies with standard EN60598-1 and any other specific standard.

IP40

Dimmable:

LUMINAIRE
–Power Supply: Electronique Intégré –Watt: 27W –Tension: 220V-240V –Flux Lumineux (lm): 2592lm –CCT: 4000K –Efficiency: 77% –Efficacy: 95.99lm/W –CRI: 80 –Dimmable Typology: Dali
Remarques
Allows intallation and supplying of 1 to 4 PAD 230V projectors. MV through-wiring included. Upper screen in PMMA included for double emission version. PAD projectors to be ordered separately.

CARACTÈRISTIQUES
–Code Produit : M2945N01 –Installation: Projecteur, Encastré, Plafonnier –Séries: Architectural Indoor –dessiné par: Carlotta de Bevilacqua, Paola di
Arianello
DIMENSIONS
–Longueur : 1180 mm –Poids: kg 1,2 –Test au fil incandescent: 650°

Nous nous réservons le droit de modifier les spécifications de notre produit. — Last update: septembre 2023 Pour les dernières informations sur le produit, visitez www.artemide.com

PRODUCT DATA SHEET
ACCESSOIRES Algoritmo System – Embout intermédiaire (jeu 2 pièces). Pour la liaison esthétique de modules à projecteur PAD ou 37 CUBE avec des modules fluorescents ou LED. Gris métallisé. M217660

PRODUCT CODE: M2945N01
ALGORTIMO – PAS pour ALGORITMO – Plaque de fermeture. Vient obturer les positions où aucun spot PAD n’a été installé. 1 pièce requise par emplacement vide. gris-métallisé M217760

Nous nous réservons le droit de modifier les spécifications de notre produit. — Last update: septembre 2023 Pour les dernières informations sur le produit, visitez www.artemide.com

Documents / Resources

Artemide 4566830 Algoritmo System LED Lighting [pdf] Instruction Manual
4566830, 4566830 Algoritmo System LED Lighting, Algoritmo System LED Lighting, LED Lighting

References

Leave a comment

Your email address will not be published. Required fields are marked *