3~ Rectifier Bridge
Part number
VUO62-16NO7
VUO62-16NO7 Standard Rectifier Module
| 3~ Rectifier | ||
| VRRM | = | 1600 V |
| IDAV | = | 60 A |
| IFSM | = | 550 A |
Features / Advantages:
- Package with DCB ceramic
- Improved temperature and power cycling
- Planar passivated chips
- Very low forward voltage drop
- Very low leakage current
Applications:
- Diode for main rectification
- For three phase bridge configurations
- Supplies for DC power equipment
- Input rectifiers for PWM inverter
- Battery DC power supplies
- Field supply for DC motors
Package: PWS-D
- Isolation Voltage: V~3000
- Industry standard outline
- RoHS compliant
- Easy to mount with two screws
- Base plate: Copper internally DCB isolated
- Advanced power cycling
Disclaimer Notice
Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
Rectifier
| Rectifier | Ratings | ||||||
| Symbol | Definition Conditions | min. | typ. | max. | Unit | ||
| VRSM | max. non-repetitive reverse blocking voltage | TVJ = 25°C | 1700 | V | |||
| VRRM | max. repetitive reverse blocking voltage | TVJ = 25°C | 1600 | V | |||
| IR | reverse current | VR = 1600 V VR = 1600 V |
TVJ = 25°C TVJ = 150°C |
40 1.5 |
µA mA |
||
| VF | forward voltage drop | IF = 20 A IF = 60 A |
TVJ = 25°C | 1.07 1.30 |
V V |
||
| IF = 20 A IF = 60 A |
TVJ = 125 °C | 0.96 1.27 |
V V |
||||
| I DAV | bridge output current rectangular d = ⅓ | TC = 120°C | TVJ = 150°C | 60 | A | ||
| VF0 rF | threshold voltage slope resistance | for power loss calculation only | TVJ= 150°C | 0.78 8.1 |
V mΩ | ||
| RthJC | thermal resistance junction to case | 1.1 | K/W | ||||
| RthCH | thermal resistance case to heatsink | 0.4 | K/W | ||||
| Ptot | total power dissipation | TC = 25°C | 110 | W | |||
| IFSM | max. forward surge current | t = 10 ms; (50 Hz), sine t = 8,3 ms; (60 Hz), sine |
TVJ = 45°C VR = 0 V |
550 595 |
A A |
||
| t = 10 ms; (50 Hz), sine t = 8,3 ms; (60 Hz), sine |
TVJ = 150°C VR = 0 V |
470 505 |
A A |
||||
| I²t | value for fusing | t = 10 ms; (50 Hz), sine t = 8,3 ms; (60 Hz), sine |
TVJ = 45°C VR = 0 V |
1.52 1.48 |
kA²s kA²s |
||
| t = 10 ms; (50 Hz), sine t = 8,3 ms; (60 Hz), sine |
TVJ = 150°C VR = 0 V |
1.11 1.06 |
kA²s kA²s |
||||
| CJ | junction capacitance | VR = 400 V; f = 1 MHz | TVJ = 25°C | 19 | pF | ||
| Package | PWS-D | Ratings | |||||
| Symbol | Definition | Conditions | min. | typ. | max. | Unit | |
| I RMS | RMS current | per terminal | 150 | A | |||
| TVJ | virtual junction temperature | -40 | 150 | °C | |||
| Top | operation temperature | -40 | 125 | °C | |||
| Tstg | storage temperature | -40 | 125 | °C | |||
| Weight | 159 | g | |||||
| MD MT |
mounting torque terminal torque | 4.25 4.25 |
5.75 | Nm | |||
| 5.75 | Nm | ||||||
| dSpp/App dSpb/Apb |
creepage distance on surface | striking distance through air | terminal to terminal terminal to backside | 9.5 26.0 |
mm mm |
|||
| V ISOL |
isolation voltage | t = 1 second t = 1 minute |
50/60 Hz, RMS; IISOL ≤ 1 mA | 3000 2500 |
V V |
||
| Ordering | Ordering Number | Marking on Product | Delivery Mode | Quantity | Code No. |
| Standard | VUO62-16NO7 | VUO62-16NO7 | Box | 10 | 460478 |
| Equivalent Circuits for Simulation | * on die level | T = VJ 150 °C |
 |
Rectifier | |
| V0 max threshold voltage | 0.78 | V |
| R0 max slope resistance * | 6.9 | mΩ |
Outlines PWS-D
Rectifier
IXYS reserves the right to change limits, conditions and dimensions.
Data according to IEC 60747and per semiconductor unless otherwise specified
© 2019 IXYS all rights reserved
Downloaded from Arrow.com.
Documents / Resources
 |
Arrow VUO62-16NO7 Standard Rectifier Module [pdf] Owner's Manual VUO62-16NO7, VUO62-16NO7 Standard Rectifier Module, VUO62-16NO7, Standard Rectifier Module, Rectifier Module, Module |