AromaPlan AE103-BT SmartPlugIn Diffuser User Manual

AromaPlan AE103-BT SmartPlugIn Diffuser

Scent Diffuser Smart Plug-in WHITE / BLACK

Fill any space with a strong, even fragrance in just a few minutes.
Our diffuser is ECONOMIC & EFFECTIVE, with 10 intensity levels for small to medium-sized rooms.

• This device is compatible with devices that support Bluetooth wireless technology and controlled via AromaPlan’s exclusive app, allowing you to adjust intensity levels and schedule usage easily from your smartphone.
• A fresh fragrance to enhance your everyday mood.
  Plug in, connect, and transform your space effortlessly!

FEATURES

• APP control
• Safe for Pets & Kids
• Heatless & waterless atomizer technology
• Easily adjust scent intensity and schedules

Parameters

Installation Method

1. Unscrew the lower cover;
2. Unscrew the oil bottle to fill or change the fragrance oils;
3. Screw the oil bottle and the lower cover;
4. Plug in the sockets.

OPERATION INSTRUCTION

CONNECT YOUR DIFFUSER TO THE NEW AROMAPLAN APP.
MORE CONVENIENT AND INTELLIGENT.

Connectivity Instruction

Important Notes:

1. This device is compatible with devices that support Bluetooth wireless technology. Make sure the function on your phone is turned ON.
2. Ensure the location services on your mobile phone are enabled.

Where to download the AromaPlan app:
Scan the QR Code to download the app on your phone.
Available on the App Store and Play Store.
Attention: Your Scent Diffuser Smart Plug-in can only be configured using the app.

Setting Up Your Device with the App

Troubleshooting

Before requesting repairs, please attempt to diagnose the issue by following the instructions below.

Equipment Cleaning

The diffuser needs cleaning under the following conditions:

1. When switching to a different type of fragrance.
2. If the atomization output decreases significantly.

Cleaning steps:

1. Remove the atomizer head and detach the oil bottle.
2. Prepare a container large enough to submerge the bottle.
   Fill it with 70°/o to 99°/o isopropyl alcohol (isopropanol).
3. Allow the bottle to air-dry completely before reassembling.

CAUTION AVOID ACCIDENTS AND PROPERTY LOSS.
PLEASE ALWAYS FOLLOW THE INSTRUCTIONS.

WARNING
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, property damage and injury to person, including the following:

INSTALLING

• Use the appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, property damage, or injury.
• To avoid fire or shock hazards, plug the appliance directly into a safe electrical outlet.
• DO NOT plug in with wet hands.
• DO NOT modify, disassemble, or attempt to repair the machine.
• DO NOT use the diffuser in high-temperature or high-humidity environments.
• DO NOT allow the mist outlets to face the wall directly. Install the diffuser in a ventilated and adequate space.
• NEVER place the diffuser in an area accessible to children.
• DO NOT block the air outlet while the unit is running.
• DO NOT use inflammable, explosive, corrosive, or other hazardous solvents with the diffuser.
• Suggested average daily usage time should not exceed 14 hours.
• Shut down the unit in extreme weather conditions.
• Ensure the device is securely installed to avoid it falling. It is recommended to screw the device to the wall rather than using adhesive tape.
• Keep the device upright while plugged into the outlet to prevent oil overflow and ensure optimal performance. Tilting or placing the device flat may cause damage or malfunction.

ATTENTION
This diffuser should only be used with fragrance oil without adding water. For better performance, we recommend only using AROMAPLAN’s scents.

FCC WARNING

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Versatile and Adaptable
Ideal for enhancing any space, from cozy homes to bustling commercial environments.