
Flush Access Panel [Luxe]
Installation Guide
Luxe Flush Access Panel
![]() |
![]() |
| Locate studs behind drywall and cut a hole. Dry-fit Body into opening. | Ensure flange is flat to the wall. Use drywall screws to fasten. |
![]() |
![]() |
| Use mud to cover flange surface. Wait to dry, then sand. Repeat as needed. | Paint to match wall colour. If using wallpaper, do not cover Body. |
![]() |
![]() |
| Paint or wallpaper Tray to match Body and surrounding wall surface. | Fix Tray in place by sliding it down until it locks. |

Additional Support
support@ariavent.com / www.ariavent.com
Patent Information
www.ariavent.com/pages/patents
![]()
Made in Canada
Documents / Resources
![]() | Luxe Flush Access Panel |
References
- Patent Information – Fitteswww.ariavent.com
- User Manualmanual.tools
Published: July 11, 2023






