ARGOX CP-EX Pro Series Desktop Barcode Printer
Specifications
- Manufacturer: Argox Information Co., Ltd.
- Product Series: CP-EX Pro Series
- Revision Date: May 2024
- Version: v1.0
Product Usage Instructions
- Start by identifying the Peeler Connector.
- Follow the Quick Installation Guide steps in sequence.
- Place the peeler in the appropriate position as indicated in the guide.
- Continue with steps 5 to 14 as outlined in the manual.
- Ensure proper connection and alignment during installation.
FAQs
- Q: How do I ensure proper alignment of the peeler during installation?
- A: Make sure to follow the installation steps provided in the Quick Installation Guide carefully. Align the peeler according to the illustrations and ensure a secure connection.
- Q: What should I do if I encounter difficulties during installation?
- A: If you face any challenges during installation, refer to the troubleshooting section in the user manual or contact our customer support for assistance.
Revision Date : May 2024
v1.0
Argox Information Co., Ltd.
8F., No. 28, Baogao Rd., Xindian Dist., New Taipei City 231029, Taiwan (R.O.C.) Tel: +886-2-8912-1121 Fax: +886-2-8912-1124 https://www.argox.com https://www.youtube.com/user/argoxmkt Copyright © 2024. Argox Information Co., Ltd. All Rights Reserved.
CP-EX Pro Series
Peeler Quick Installation Guide
Guía de instalación rápida del pelador Guia de instalação rápida de descascador
Guide d’installation rapide de l’éplucheur Schäler Schnellinstallationsanleitung
Guida all’installazione rapida della pelatrice Soyma Makinesi Hizli Kurulum Kilavuzu Panduan Instalasi Cepat Pengupas Skalare Snabbinstallationsguide Snelle installatiehandleiding schiller Skrócona instrukcja montau odklejaka
Introduction
Proprietary Statement
This manual contains proprietary information of Argox Information Co., Ltd. It is
intended solely for the information and use of parties operating and maintaining the
equipment described herein. Such proprietary information may not be used,
reproduced, or disclosed to any other parties for any other purpose without the
expressed written permission of Argox Information Co., Ltd.
Product Improvements
Continuous improvement of products is a policy of Argox Information Co., Ltd. All
specifications and signs are subject to change without notice.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into a different outlet on a different circuit.
• Consult the dealer or an experience Radio/TV technician for help.
This unit was tested with shielded cables on the peripheral devices. Shielded cables
must be used with the unit to insure compliance. The user is cautioned that any
changes or modifications not expressly approved by Argox Information Co., Ltd.
could void the user’s authority to operate the equipment.
Liability Disclaimer
Argox Information Co., Ltd. takes steps to assure that the company’s published
engineering specifications and manuals are correct; however, errors do occur. Argox
Information Co., Ltd. reserves the right to correct any such errors and disclaims any
resulting liability. In no event shall Argox Information Co., Ltd. or anyone else
involved in the creation, production, or delivery of the accompanying product
(including hardware and software) be liable for any damages whatsoever (including,
without limitation, damages for loss of business profits, business interruption, loss of
business information, or other pecuniary loss) arising out of the use of or the results
of use of or inability to use such product, even if Argox Information Co., Ltd. has been
advised of the possibility of such damages.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
To ensure this printer can fulfill user’s demand, when using narrow media for
continuous printing, the printer will optimize appropriately to support continuous, high
quality print-out. If you have any questions, please consult Argox technical service
personnel.
Getting Started
Congratulations on choosing CP-EX / CX compact printer series,
made by Argox Information Co., a leader in the worldwide barcode
industry. CP / CX compact printer series are ideally designed to easily
bring more efficiency for your business. This manual will help you get
to know your new printer and provide sufficient information needed.
Unpacking Printer
After receiving your printer, please check for possible shipping
damage:
Inspect the outside of both the box and the printer for possible
damage.
1. Open the top cover of the printer to see if all parts are in order.
Note: If finding that the printer shipped is damaged, contact your shipping company immediately to file a claim.
2. Check whether you have received the following accessories together with the printer. If there is any item missing, please contact your local dealer.
Package Contents
• Quick Installation Guide
• Power Cord
• Media Hanger & Media Shields
• Printer
• Power Supply
• USB cable
• Ribbon Core Adaptors
• 1” ID Core for Ribbon
• DVD
Printer Overview
Front View:
Rear View: CP-2140EX / CP-3140EX / CX series
Interior View I
Interior View II
Attaching Power
1. Make sure the printer’s power switch is in the off position (down).
2. Insert the AC power cord into the power supply.
3. Insert the power supply’s power connector into the printer’s power
jack.
4. Plug the other end of the power cord into an appropriate grounded
AC electrical outlet.
Warning: Do not operate the printer and power supply in an area where they might get wet.
Loading Media
Preparing Media
The inside wound or outside wound media rolls can be loaded into the printer in the same way. In case media roll may become dirty or dusty during shipment, handling, or storage, firstly remove the outside length of media, which helps to avoid dragging adhesive or dirty media between the print head and platen roller. When loading media, it must be placed onto the media hangers.
Placing Media Roll
1. Gently press the recesses on both sides of the top cover of the printer (1), and then lift up the top cover of the printer to open (2).\
2. Put the Media Hanger through media supply roll, and then centrally align with the two Media Shields to closely lean against the media supply roll.
3. Locate the media supply roll into the Media Compartment of printer.
4. Push the Release Latch to open the printer module.
5. Pull a short length of media until it reaches the Platen Roll of printer.
6. Press the lock of Media Guide at the right to adjust media guides’ positions. Make sure media stays under the Media Shaft and centrally under both of the Media Guides.
Documents / Resources
 |
ARGOX CP-EX Pro Series Desktop Barcode Printer [pdf] Installation Guide CP-EX Pro Series, CP-EX Pro Series Desktop Barcode Printer, Desktop Barcode Printer, Barcode Printer, Printer |