ArgomTech Collapsible 3-in-1 Wireless Charger
Product Information
- The Collapsible 3-in-1 Wireless Charger is a versatile charging solution that supports wireless charging for phones, iPods, and iWatches. It comes with a Type-C input port and offers fast charging capabilities.
- Connect the charger to a power source using the provided 100cm USB-C to USB-C Fast Charging Cable.
- Long-press the On/Off button to activate the wireless charging function.
- Place your compatible devices on the designated charging areas.
- The wireless charging frame lights and indicators will show the charging status.
- Connect the charger to a power source using the USB-C cable.
- Long-press the On/Off button to turn on the wireless charging function.
- Place your devices on the corresponding charging areas.
- The wireless charging frame lights and indicators will show the charging status.
Collapsible 3-in-1 Wireless Charger Quick Start Guide #25254/AST-WR254
WHAT IS INCLUDED
- #25254/AST-WR254 Collapsible 3-in-1 Wireless Charger
- 100cm USB-C to USB-C Fast Charging Cable
GETTING TO KNOW YOUR Wireless Charger
- On / Off button
- Type-C input port
- Wireless charging area for the iWatch
- Wireless charging area for the phone
- Wireless charging frame lights
- Wireless charging area for iPod
- iPod charging indicator
SPECIFICATION
- Type-C Input: DC9V/3A
- Wireless Output for Phone: 15W (Max.)
- Wireless Output for iPod: 3W (Max.)
- Wireless Output for iWatch: 2W (Max.)
Charging your portable devices
Use the attached USB-C to USB-C charging cable to connect this 3-in-1 wireless charger to the power source, long-press the On/Off button, then the wireless charging frame lights and the iPod charging indicator will flash 3 times, then remain on. Put your portable devices with wireless charging function onto the correct wireless charging areas, then the charging begins, the wireless charging frame lights and iPod charging indicator will be blinking while charging.
- When no mobile phone is charging, wireless charging frame lights go out after 30 seconds of standby, but the wireless charging function remains on, so the frame lights will return to blinking status after we put the mobile phone back to the wireless charging area for phone.
- When the wireless charging frame lights go out, click the button once to restore the frame lights to normal display. If there is no mobile phone charging, the frame lights will go out again after 30 seconds. Clicking the button is only effective when the frame lights go out.
Clicking the button during the charging process has no effect.
Button function:
- Long press to turn off all wireless charging functions, frame lights, and indicators.
- Long-press again to turn on all wireless charging functions, frame lights, and the indicator.
- Single-click to wake up the wireless charging frame lights.
NTC Protection Available for This Wireless Charger
- The wireless charging frame lights will flash when over-temperature protection is activated.
FOD
- When wireless charging for phone or an iPod, if the wireless charging frame lights or the iPod charging indicator keeps flashing, the device to be charged is either NOT a wireless charging device or there is a foreign object between the device and the wireless charging surface interfering with the charging process.
Note
- Some phone cases may block the wireless charging for the phone. Make sure your mobile device is enabled with a wireless charging function before charging.
- When the mobile device is not placed on the charging surface accurately, your mobile devices may not be charged.
- Important: Only use the included accessory or certified and tested accessories to perform wireless charger functions.
Safety Precautions
WARNING –When using this product, basic precautions should always be followed as below:
- Read all the instructions before using the product.
- This is not a toy, not suitable for children under the age of 7, and to reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not expose the device to moisture or heat sources.
- Do not use the device beyond its output rating. Overloading outputs above rating may result in damage, fire, or injury.
- Do not use the device if damaged or modified.
- Do not disassemble the device; incorrect reassembly may result in damage or injury.
- Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C). Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 100ºC may cause fire or injury.
- Do not place other materials, like metal objects, magnets, and magnetic stripe cards, between the mobile devices and the wireless charging areas.
- Do not overcharge your mobile devices. Unit may get hot with excessive use . Disconnect mobile devices when they are fully charged.
- The distance between the user and the products should be no less than 20cm.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC ID: 2A92I-AST-WR254
Medical Device Interference
- This charger contains magnets and radios that emit electromagnetic fields.
- These electromagnetic fields may interfere with medical devices, such as pacemakers and defibrillators.
- Consult your physician and medical device manufacturer for information specific to your medical device and check whether you need to maintain a safe distance of separation between your medical device and this charger.
- If you suspect this charger is interfering with your medical device, stop using this charger.
- Apple ®and Apple Watch ® are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
FAQ
- What should I do if my phone case blocks wireless charging?
- Make sure to use a phone case that is compatible with wireless charging or remove the case before charging.
- How do I know if my device is not charging due to a foreign object?
- If the wireless charging frame lights keep flashing, check for any foreign objects between the device and the charging surface.
- What should I do if the wireless charging frame lights go out?
- If the frame lights go out, click the button once to restore normal display. The frame lights will go out again after 30 seconds if there is no device charging.
Documents / Resources
 |
ArgomTech Collapsible 3-in-1 Wireless Charger [pdf] User Guide AST-WR254, 2A92I-AST-WR254, 2A92IASTWR254, AST-WR254 Collapsible 3-in-1 Wireless Charger, AST-WR254, Collapsible 3-in-1 Wireless Charger, 3-in-1 Wireless Charger, Wireless Charger |