ARG Motion Sensors For Gate Automation
General information
Adjustments
- The sensitivity settings determine the size of the sensing field.
vertical angle:mounting hei -141 2,m2rn - The vertical angle of the planar antenna determines the depth of the sensing field
- The vertical angle of the planar antenna determines the depth of the sensing field
sensitivity:maximum
Lnstallation tips
- Avoid Vibrations
- DO not cover the sensor
- Moving objects
- Avoid proximity to nanoamps
- Do not touch electronical parts”
- Sensitivity adjustment potentiometer please gently, slowly rotating
Troubleshooting
| SYMPTOMS | PROBABLE CAUSES | CORRECTIVE ACTION |
| The door will not open and no red LED lights up | The sensor power is off | Check the wiring and the power supply |
| The door opens and closes constantly | The sensor–5000hr door moving. when the door creates vibrations pickup by the sensor | Increase the lilt angle and/or reduce the sensitivity. Make sure that the sensor is correctly fixed Switch to unidirectional mode(dip switch 1.0N) Increase the immunity(dip switch 4:014). Reduce the sensitivity. |
| The door will notclose Red LED is OFF | ON-OFF switch at door control is in wrong position or faulty. Improper output configuration |
Make suns that the ON-OFF switch for door is in the ON or AUTOMATIC position Check the output configuration setting on each sensor connected to the door operator. |
| It rains and the sensor detects for no apparent mason. | The sensor detects the motion of the rain drops. | Use the ARB accessory Switch to unidirectional mode and Increase the immunity(dip switches 1114:ON). |
Technical specifications
| Technology | microwave and microprocessor |
| Transmitter frequency | 24.125GHz |
| Transmitter radiated power | <20 dBm EIRP |
| Transmitter power density | <5mW/cm |
| Maximum mounting height | 3m |
| Tilt angles | 0 |
| Detection field(mounting height=2 2m) | 4m(W)x 2m (D) |
| Detection mode | motion |
| Minimum speed | 5cm/s(measured in the sensor axis) |
| Supply voltage | 12V to 24V AC/DC +30 10% |
| Mains frequency | 50 to 60 |
| Power consumption | <2W(VA) |
| Output relay(free of potential change-over contact) | |
| Max contact voltage | 42V AC-60VA(AC) |
| Max. contact current | 1A(resistive) |
| Max_switching power | 30W(DC)/60VA(AC) |
| Hold time | 0.5s |
| Temperature range | -20 ( to ‘ 55 |
| Degree of protection | 11)54 |
| Norm Conformity | R&TTE 1999/5/EC EMC 89/336/EEC |
| Material | ABS |
| Color of housing | black smoked, aluminium finish |
| Dimensions | 120mm(W)•80mm(H) 50mm(D) |
| Weight | 0215kg |
| Length of cable | 25m |
Accessories(sold individually)
Documents / Resources
 |
ARG Motion Sensors For Gate Automation [pdf] User Manual Motion Sensors For Gate Automation, Sensors For Gate Automation, For Gate Automation, Gate Automation, Automation |
