BM5510 Handheld ID Check Terminal
“
Product Information
Specifications:
- Model: BM5510
- Version: 2.0
- Main Features: Portable, powerful, versatile handheld ID check
terminal - Applications: Law enforcement, National ID, remote financial
services - Battery Life: Ultra-long lasting
Product Usage Instructions:
1. Introduction:
The ARATEK BM5510 Handheld ID Check Terminal is a portable,
powerful, and versatile device designed for easy identification.
With phenomenal battery life, it is suitable for various
applications including law enforcement, National ID projects, and
remote financial services.
2. Important Safety Information:
Follow these safety instructions to ensure proper usage of the
device:
- Do not use liquid or aerosol cleaners for cleaning.
- Avoid disassembling or modifying the device.
- Charge the battery only with the provided charger.
- Avoid exposure to fire, heat, extreme temperatures, or dusty
environments. - Avoid dropping, knocking, or shaking the device violently.
- Always turn off the device before inserting or removing the SIM
card.
3. Product Interface:
4. Operations:
Before using the device for the first time or after a long
period, ensure to charge it fully.
(1) How to charge:
The battery charges whenever the DC Adaptor power is available.
Red light indicates charging below 95%, while green light indicates
charging at or above 95%.
(2) Power On/Off operation:
(3) Insert/Remove SIM card:
(4) Insert/Remove SD card:
(5) Remove battery:
5. Troubleshooting:
6. FAQ:
- How to enable USB device mode?
Go to: Settings—Connected Devices menu, then manually enable USB
Device Mode option. - Why can’t I use fingerprint after transferring files
between device and PC?
When copying files between the device and PC, enable USB device
mode. Disable USB device mode after file transfer unless
fingerprint won’t work. - How to transfer files between BM5510 and
PC?
Follow these steps: Enable USB device mode, connect PC using Type C
cable, open notification message on PC, choose file transfer in
Settings—Connected Devices—USB Preferences, find BM5510 on PC,
transfer files, unplug cable, and disable USB device mode.
“`
BM5510
User manual
V 2.0
1
Table OF CONTENTS:
1. Introduction ………………………………………………………………………………………………3 2. Important Safety Information……………………………………………………………………….3 3. Product Interface………………………………………………………………………………………..4 4. Operations…………………………………………………………………………………………………5 5. Troubleshooting …………………………………………………………………………………………8 6. FAQ…………………………………………………………………………………………………………..9 7. Technical Specifications ……………………………………………………………………………..12
2
1. Introduction
Portable. Powerful. Versatile. The ARATE is an all-in-one device for easy identification and
Phenomenal battery life. Highly-portable. Feature-packed. When the job calls for a reliable and portable fingerprint scanner, the ARATEK BM5510 Handheld ID Check Terminal is the only choice. The device features an ultra-long battery life that keeps going, making the ARATEK BM5510 the perfect biometrics tool for law enforcement, National ID, remote financial services, and many other applications.
2. Important Safety Information
Please follow the following safety instructions:
Do not use liquid or aerosol cleaners for cleaning. Do not disassemble or modify the device. Do not try to charge the battery with other chargers. Do not yank the power cord or place anything on the power cord. Do not expose the device into fire or heat it, or it may cause crack and injury. Do not use or store the device under too hot, too cold or dusty environment. Do not drop, knock or shake the device violently, or it may damage internal circuit
board. Do not forget to turn off the device before SIM card insert and remove.
3
3. Product Interface
4
4. Operations
Before switching ON device for the first time or after a long time period, put it on charging until full power.
(1) How to charge
· Type C USB port can be used to charge the battery. · When charge the device, plug in the USB cable in the device and the power adaptor.
Even if the device is not switched ON, the battery will be charged whenever the DC Adaptor power is available. Red/green indicator light: red light when power charging is less than 95%; green light when power charging is greater than or equal to 95%
5
(2) Power On/Off operation
(3) Insert/Remove SIM card
· There are two SIM slots, you can insert a maximum of two SIM cards. · Ensure the device is turned OFF before inserting or removing a SIM card.
6
(4) Insert/Remove SD card
(5) Remove battery
· Loosen two screws · Open the battery cover through the slot · Remove the battery
7
5. Troubleshooting
Problem 1: charging failure
Solution: (1) Check if the plug is inserted correctly. (2) Ensure that micro USB charging port has good contact.
Problem 2: Over Heating
Solution: Avoid using the device under too hot environment. Stop device operation for a while.
Problem 3: System crash
Solution: a. Long press power button to turn off, then turn on. b. Press reset button to restart device. c. Contact Aratek support team.
Problem 4: Other problems
Solution: Contact Aratek for support, website: www.aratek.co
8
6. FAQ
1. How to enable USB device mode? Go to: Settings—Connected Devices menu, then manually enable USB Device Mode option.
2. Why I can’t use fingerprint after I transfer files between device and PC? When you copy the files between the device and the PC, you need to enable the USB device mode. After file transfer, you have to disable the USB device mode unless your fingerprint can’t work.. Go to: Settings—Connected Devices— USB Device Mode to disable the USB device mode
3. How to transfer files between BM5510 and PC, why BM5510 can’t be found in my PC?.
Please follow below steps:
1) Enable USB device mode. 2) Connect a PC by a Type C cable. 3) Click and open the notification message (Android system-Charging this device via USB). 4) Choose file transfer by this path: Settings—Connected Devices— USB Preferences. 5) Open your PC, you can find BM5510 is in your PC and you can transfer file between BM5510 and your PC.. 6) After file transfer, unplug the type C cable and disable the USB device mode
9
10
4. Is there a way we could do debugging from PC while keeping the fingerprint on?
Please use WI-FI-debugging. Detailed steps were shown in Q5. 5. Why and how to do Wi-Fi Debug?
Due to one USB port design in motherboard, fingerprint and TYPE C port cannot be used at the same time.
Steps for Wi-Fi debug:
1) Turn on Android device USB Debugging and enable USB device mode , then connect device with PC. 2) Turn on Wi-Fi and connect the device to local area network, make sure your Android device and PC can communicate with each other in local area network. 3) Open command line and enter command like below:
adb tcpip 5555 adb shell netcfg 4) Find your Android device IP address, (such as 192.168.XXX.XXX),then disconnect the device, and enter command on PC: adb connect 192.168.xxx.xxx 5) Disable the USB device mode (in Settings—Connected Devices—USB Device Mode). 6) Then, you can debug through Wi-Fi.
11
7. Technical Specifications
Basic
Operating System Processor
Memory (RAM+ROM) Display
Resolution Camera
Expansion Card Battery
Charging
Weight Dimension Accessories
Temperature and Humidity
Biometrics
Communications Credential Reading
Type Platen Area Sensing Area Image Size Image Resolution Grayscale
SIM Card Wi-Fi
Bluetooth 2G 3G 4G
Location USB Ports
NFC
Android 13 Octa-core 2.3GHz
4G+128G 5 Inches 720*1280 Pixels IPS LCD
720*1280 IPS 16 MP Auto Focus (Rear)
SD Card, Up to 256G 10,000mAh removable Input: 100-240V, 50/60hz; Output: 9V/2A, Fast
charging ability 465g
201*82*46 mm (L*W*H) Power adapter, Type-C cable
Operation: -0~50, 10%-75%
Storage: -20~60, 5%-85% FBI PIV certified FAP20 optical
21.0*16.0 mm 20.3mm*15.2mm Image Size: 300*400
500 dpi 256 level Micro Sim Card *2 802.11 a/ac/b/g/n Bluetooth 5.0 850&900&1800&1900 B1&B2&B5&B8 B1/B2/B3/B4/B5/B7/B8/B20/B28 GPS + GLONASS + Galileo + Beidou Type A USB 2.0 *1, Type-C *1
ISO/IEC 14443 A/B,ISO 15693,ISO 18092
12
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Radiation Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 5mm from your body.
13
Documents / Resources
 |
ARATEK BM5510 Handheld ID Check Terminal [pdf] User Manual BM5510, BM5510 Handheld ID Check Terminal, Handheld ID Check Terminal, ID Check Terminal, Terminal |