دليل المستخدم لآلة التوجيه باستخدام الحاسب الآلي VEVOR S4040

1. المقدمة

This manual provides essential information for the safe and efficient operation of your VEVOR S4040 CNC Router Machine. This 3-axis wood engraving and milling machine features a 300W spindle, a 15.75 x 15.75 x 2.36 inch working area, and an offline controller. It is designed for precise engraving and cutting on various materials including wood, acrylic, MDF, leather, plastic, foam, vinyl, and soft metals.

Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury.

2. تعليمات السلامة

Always prioritize safety when operating the CNC router machine. Failure to follow these instructions may result in serious injury or damage to the equipment.

• اقرأ الدليل: تأكد من فهم كافة التعليمات والتحذيرات قبل الاستخدام.
• معدات الحماية الشخصية (PPE): Always wear safety glasses to protect your eyes from flying debris. Consider hearing protection and a dust mask, especially when working with materials that produce fine particles.
• منطقة العمل: Ensure your work area is clean, well-lit, and free from obstructions. Keep children and unauthorized personnel away from the machine during operation.
• تأمين قطعة العمل: دائما بشكل آمنamp your material to the workbed to prevent movement during engraving or cutting.
• التوقف في حالات الطوارئ: تعرف على موقع وطريقة تشغيل زر التوقف في حالات الطوارئ.
• انقطاع التيار الكهربائي: Disconnect power before performing any maintenance, adjustments, or when changing tools.
• الأدوات: Use only sharp, appropriate cutting tools for the material being processed. Dull or incorrect tools can cause kickback or breakage.
• تهوية: Ensure adequate ventilation, especially when working with materials that produce fumes or dust.
• السلامة الكهربائية: لا تقم بتشغيل الجهاز بأيدٍ مبللة أو في حالة...amp conditions. Ensure all electrical connections are secure and properly grounded.
• لا تتركها دون مراقبة أبدًا: لا تترك الجهاز يعمل دون رقابة.

3. محتويات العبوة

Upon unpacking, verify that all components are present and undamaged. If any items are missing or damaged, contact VEVOR customer support immediately.

• 1 x CNC Router Machine (main unit)
• تحكم غير متصل
• محول الطاقة
• كابل يو اس بي
• Assorted Engraving Bits
• Clamps
• Wrenches and Hex Keys
• فرشاة
• Other necessary accessories for assembly

Image: VEVOR S4040 CNC Router Machine with its various included accessories, such as the offline controller, power supply, USB cable, and tools.

4. الإعداد

The VEVOR S4040 CNC Router Machine features a pre-assembled design for quick installation. Key components come pre-assembled and pre-wired, simplifying the setup process.

4.1 خطوات التجميع

1. فك مكونات الحزمة: Carefully remove all parts from the packaging and place them on a clean, stable surface.
2. Connect Pre-assembled Modules: The machine consists of a few main pre-assembled modules. Follow the included quick start guide or detailed assembly instructions to connect these modules. Typically, this involves attaching the gantry to the base and securing the spindle assembly.
3. التوصيل الآمن: Ensure all pre-wired connections are properly seated and secured. Use cable ties if necessary to manage cables and prevent them from interfering with moving parts.
4. توصيل الطاقة: Connect the power adapter to the machine and then to a grounded electrical outlet. Do not power on yet.
5. اتصال الكمبيوتر (اختياري): If you plan to operate the machine via a computer, connect the USB cable from the machine to your computer.

Image: The VEVOR S4040 CNC Router Machine shown fully assembled, ready for operation.

5. تعليمات التشغيل

The VEVOR S4040 offers both offline control via its 2.4-inch touchscreen controller and online control through compatible software.

5.1 التحكم دون اتصال بالإنترنت

The 2.4-inch touchscreen offline controller allows you to operate the machine without a computer connection.

1. Prepare G-code: احفظ كود G الخاص بك files (design instructions) onto a USB drive.
2. أدخل محرك أقراص USB: Plug the USB drive into the offline controller.
3. تشغيل الطاقة: Turn on the machine's power switch.
4. يختار File: Use the touchscreen interface to navigate and select your desired G-code file.
5. موضع قطعة العمل: Secure your material on the workbed using the provided clamps.
6. تحديد الأصل: Manually move the spindle to the desired starting point (origin) for your engraving/cutting job and set the X, Y, and Z axes origin through the controller.
7. بدء العملية: Initiate the engraving or cutting process from the controller.
8. Adjust Spindle Speed: Use the rotary knob on the machine to precisely control the spindle speed during operation.

الصورة: لقطة مقربة view of the 2.4-inch touchscreen offline controller, showing its interface for file selection and machine control.

5.2 Software Compatibility (Online Control)

The machine is compatible with all software that supports GRBL f1.1 firmware. Popular compatible software includes:

• CNC (Candle): Supports Windows 7/8/10/11 and macOS.
• Easel: Supports Windows 7/8/10/11, macOS, and Linux.
• ليزرGRBL: Supports Windows 7/8/10/11 and macOS (via Virtual Machine).
• لايت بيرن: Supports Windows 7/8/10/11 and macOS.

To operate via computer, install the necessary drivers and software, connect the machine via USB, and follow the software's instructions for loading G-code, setting parameters, and initiating jobs.

Image: The VEVOR S4040 CNC Router Machine connected to a laptop, demonstrating its compatibility with various design and control software.

5.3 مواد النقش والقطع

The VEVOR S4040 is suitable for a wide range of materials:

• Wood (hardwood, softwood, MDF)
• الاكريليك واضحة
• جلد
• بلاستيك
• رغوة
• فينيل
• Soft Metals (e.g., aluminum, brass)

Image: The VEVOR S4040 CNC Router Machine actively engraving a detailed lion head design into a piece of wood, showcasing its precision.

6. الصيانة

Regular maintenance ensures the longevity and optimal performance of your CNC router machine.

• تنظيف: After each use, clean the work area, rails, and lead screws to remove dust, chips, and debris. Use a brush or vacuum. Avoid using compressed air directly on sensitive electronic components.
• تشحيم: Periodically apply a small amount of appropriate lubricant to the linear rails and lead screws to ensure smooth movement. Refer to the manufacturer's recommendations for lubricant type and frequency.
• التحقق من الاتصالات: Regularly inspect all electrical connections, cables, and mechanical fasteners to ensure they are secure. Tighten any loose screws or bolts.
• العناية بالمغزل: Keep the spindle clean and free of debris. Ensure proper ventilation around the spindle motor to prevent overheating. The spindle motor features current detection protection, extending its lifespan up to 5,000 hours.
• فحص الأدوات: Inspect cutting bits before each use for sharpness and damage. Replace dull or broken bits immediately.

7. استكشاف الأخطاء وإصلاحها

يتناول هذا القسم المشكلات الشائعة التي قد تواجهها. أما بالنسبة للمشكلات غير المذكورة هنا، فيُرجى الاتصال بدعم عملاء VEVOR.

8. المواصفات

Detailed technical specifications for the VEVOR S4040 CNC Router Machine.

Image: The VEVOR S4040 CNC Router Machine with its overall dimensions and working area clearly indicated.

9. الضمان والدعم

For warranty information, technical support, or service inquiries, please contact VEVOR customer service. Refer to your purchase documentation or the official VEVOR webللاطلاع على شروط الضمان المحددة وتفاصيل الاتصال، يرجى زيارة الموقع الإلكتروني.

When contacting support, please have your model number (S4040) and purchase date available.