Sennheiser HD 500 BAM Plug-in Boom Arm Microphone

مقدمة

The Sennheiser HD 500 BAM is a plug-in boom arm microphone designed to enhance your compatible Sennheiser headphones for gaming, streaming, podcasting, and communication. This manual provides essential information for the proper setup, operation, and maintenance of your HD 500 BAM microphone.

محتويات التسليم

Before proceeding with installation, please ensure all components are present in the package:

• Boom arm microphone with 1.50 m cable (3.5 mm jack plug)
• التحكم في مستوى الصوت وكتم الصوت في الخط
• Y-adapter for computer use
• 3 replaceable foam popscreens
• User information (Quick Guide, Safety Guide)

يثبت

The HD 500 BAM is designed for easy installation with compatible Sennheiser headphones. Follow these steps to connect your microphone:

1. Identify Compatible Headphones: Ensure your headphones are from the Sennheiser HD 500 series or HD 620S. Compatible models include:
   • HD 505 Copper
   • عالية الدقة 518
   • عالية الدقة 550
   • عالية الدقة 558
   • عالية الدقة 559
   • اتش دي 560 اس
   • عالية الدقة 569
   • عالية الدقة 579
   • HD 598 / HD 598 Cs / HD 598 SE
   • HD 599 / HD 599 SE
   • اتش دي 620 اس

   Note: This microphone is not compatible with other headphone brands.
2. Remove Existing Cable: Disconnect the existing audio cable from your compatible Sennheiser headphones. Most Sennheiser HD 500 series and HD 620S headphones feature a twist-to-lock mechanism for cable removal. Twist the cable connector counter-clockwise and pull to detach.

3. Attach HD 500 BAM: Insert the 3.5 mm jack of the HD 500 BAM boom arm microphone into the headphone's audio input port. Twist the connector clockwise to securely lock it into place. No tools, magnets, or adhesive patches are required.

4. الاتصال بالجهاز: Connect the other end of the HD 500 BAM cable to your desired playback device. If connecting to a computer with separate microphone and headphone jacks, use the included Y-adapter. For devices with a single 3.5 mm jack (e.g., consoles, tablets, smartphones), connect directly. An additional adapter may be required for some smartphones or tablets (e.g., USB-C to 3.5 mm adapter for Apple iOS or Samsung devices).

تشغيل الميكروفون

عناصر التحكم المضمنة

The HD 500 BAM features an in-line control unit on the cable for convenient access to volume and mute functions.

• التحكم في مستوى الصوت: Use the integrated dial to adjust the audio output volume to your headphones. Rotate the dial upwards to increase volume and downwards to decrease volume.
• تبديل كتم الصوت: Slide the switch to mute or unmute the microphone. When the microphone is muted, the red indicator will be visible.

وضع الميكروفون

For optimal voice clarity and to minimize background noise, position the boom arm microphone approximately 1-2 inches from your mouth. The flexible boom arm allows for precise adjustment.

توافق الجهاز

The HD 500 BAM is compatible with a wide range of devices via its 3.5 mm plug. An adapter may be required for certain devices.

صيانة

To ensure the longevity and optimal performance of your HD 500 BAM microphone, follow these maintenance guidelines:

• Foam Pop Screens: The included foam pop screens protect the microphone from dust, moisture, and other contaminants. They also help reduce plosive sounds and breathing noises, improving sound quality. Replace pop screens as needed using the two spare ones provided.
• تنظيف: امسح الميكروفون والكابل برفق بقطعة قماش ناعمة وجافة. تجنب استخدام المواد الكيميائية القاسية أو المواد الكاشطة.
• تخزين: When not in use, store the microphone in a clean, dry place away from extreme temperatures.

استكشاف الأخطاء وإصلاحها

If you encounter issues with your HD 500 BAM microphone, refer to the following common solutions:

• لا يوجد صوت من الميكروفون:
  • Ensure the microphone is securely twisted and locked into the headphone jack.
  • Check that the mute switch on the in-line control is in the 'unmuted' position.
  • Verify that the cable is correctly connected to your device, using the Y-adapter if necessary for PC.
  • Check your device's audio settings to ensure the correct microphone input is selected and volume levels are adequate.
• Low Microphone Volume or Poor Clarity:
  • Adjust the microphone's position closer to your mouth (1-2 inches).
  • Ensure the foam pop screen is clean and properly installed.
  • Check your device's input gain or microphone volume settings.
  • Confirm that the microphone is connected to a compatible device and port.
• Audio Only in One Ear (Headphones):
  • Ensure the HD 500 BAM cable is fully inserted and locked into the headphone jack.
  • If using the Y-adapter, ensure both green (headphone) and pink (microphone) plugs are fully inserted into the correct ports on your PC.
  • Test the microphone with another compatible headphone or device to rule out a specific headphone issue.

If these steps do not resolve the issue, please refer to the Sennheiser support webالموقع أو اتصل بخدمة العملاء للحصول على مزيد من المساعدة.

تحديد

Below are the technical specifications for the Sennheiser HD 500 BAM Plug-in Boom Arm Microphone:

الضمان والدعم

Sennheiser products are manufactured to the highest quality standards and come with a limited warranty. For detailed warranty information, product registration, and technical support, please visit the official Sennheiser webالموقع أو تواصل مع خدمة العملاء. احتفظ بإيصال الشراء لطلبات الضمان.

For frequently asked questions and additional resources, refer to the 'Product guides and documents' section on the product's Amazon page or the Sennheiser support portal.