الدليل+

ELEGOO Mini Heater and Stainless Steel Funnel Kit

ELEGOO Mini Heater and Stainless Steel Funnel Kit User Manual

For Resin 3D Printers

1. انتهى المنتجview

This manual provides instructions for the ELEGOO Mini Heater for Resin 3D Printers and the ELEGOO 3D Stainless Steel Funnel with Filter and Brush. These tools are designed to enhance your resin 3D printing experience by optimizing resin temperature and ensuring clean resin handling.

ELEGOO Mini Heater and two air filters, alongside a stainless steel funnel, filter, brush, and gloves.

Image: The ELEGOO Mini Heater, two replacement air filters, a stainless steel funnel, a mesh filter, a cleaning brush, and a pair of gloves.

2. معلومات السلامة

  • Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling resin.
  • Ensure proper ventilation when operating the 3D printer and heater.
  • Keep the Mini Heater away from water or other liquids.
  • Do not attempt to disassemble or modify the Mini Heater or Funnel.
  • يحفظ بعيدًا عن متناول الأطفال والحيوانات الأليفة.

3. تعليمات الإعداد

3.1 ELEGOO Mini Heater Installation

  1. Prepare the Printer Casing: Identify a suitable flat surface inside your resin 3D printer's casing for mounting the heater.
  2. Secure Adapter to Printer Casing: Use the provided screws (labeled 1 and 2 in the diagram) to secure the mounting adapter plate to the inside wall of your 3D printer's casing. Ensure it is firmly attached.
  3. Secure Adapter to Heater: Attach the other part of the mounting adapter to the back of the Mini Heater using the designated screws (labeled 3 and 4 in the diagram).
  4. تركيب السخان: Slide the Mini Heater, with its attached adapter, onto the adapter secured to the printer casing. Ensure it clicks into place securely.
  5. توصيل الطاقة: Plug the power cable into the DC socket (labeled 2 in the diagram) on the heater. Connect the other end to a power source.
  6. تشغيل الطاقة: Flip the power switch (labeled 1 in the diagram) to turn on the heater.
Diagram showing two steps for installing the ELEGOO Mini Heater inside a 3D printer's red cover. Step 1 shows securing an adapter to the printer casing and to the heater. Step 2 shows the heater mounted and pointing out the power switch and DC socket.

Image: Step-by-step installation guide for the Mini Heater, detailing how to secure the adapter and connect power.

3.2 ELEGOO Stainless Steel Funnel Preparation

The stainless steel funnel is ready for use out of the box. Ensure the mesh filter is clean before first use. The included brush can be used for cleaning.

ELEGOO Stainless Steel Funnel with a fine mesh filter, a cleaning brush, and two pairs of disposable gloves.

Image: Components of the ELEGOO Stainless Steel Funnel kit, including the funnel, filter, brush, and gloves.

4. تعليمات التشغيل

4.1 Using the ELEGOO Mini Heater

The Mini Heater is designed to maintain optimal resin temperature for consistent 3D printing results. It features smart temperature control and an air filtration system.

  • التحكم الذكي في درجة الحرارة: The heater automatically activates when the internal temperature drops below 25°C and stops heating when it reaches or exceeds 25°C. This ensures the resin maintains optimal fluidity, reducing issues like warping and cracking during printing.
  • تسخين سريع ومتساوٍ: Equipped with a PTC heating block and a 10000R/MIN high-speed fan, the heater quickly and uniformly raises the temperature inside the printer chamber to 25°C.
  • تنقية الهواء: The self-contained air filtration module helps to reduce resin odors and airborne particles, contributing to a fresher printing environment.
Diagram illustrating the smart temperature control of the ELEGOO Mini Heater. It shows automatic heating below 25°C and stopping heating at or above 25°C, with a graph showing temperature stabilization.

Image: Illustration of the Mini Heater's smart temperature control, showing automatic heating below 25°C and stopping at or above 25°C.

Images demonstrating the benefits of maintaining resin fluidity: smooth resin pouring, a 3D print without warping, and a 3D print without cracking.

الصورة: صورة مرئيةamples of how proper resin temperature, facilitated by the heater, helps maintain resin fluidity and prevents common printing issues like warping and cracking.

4.2 Using the ELEGOO Stainless Steel Funnel

The stainless steel funnel is essential for safely and cleanly filtering unused resin back into its bottle after printing, or for transferring resin between containers.

  1. ارتداء القفازات: Always wear the provided gloves or other suitable protective gloves when handling resin.
  2. فلتر المكان: Insert the fine mesh filter into the funnel.
  3. مسار التوظيف الوظيفي: Place the funnel securely into the opening of the resin bottle or container you wish to pour into.
  4. صب الراتنج: Carefully pour the resin through the filter and funnel. The filter will catch any cured resin bits or debris, ensuring clean resin for future prints.
  5. تنظيف: After use, clean the funnel and filter immediately with isopropyl alcohol (IPA) or a suitable resin cleaner.

5. الصيانة

5.1 ELEGOO Mini Heater Maintenance

  • استبدال فلتر الهواء: The Mini Heater includes a self-contained air filtration module. Replace the air filter periodically (e.g., every 1-3 months depending on usage) to maintain optimal air purification performance. Two replacement filters are included.
  • تنظيف: Gently wipe the exterior of the heater with a dry or slightly damp قطعة قماش. لا تستخدم مواد كيميائية قاسية أو تغمر الجهاز في الماء.
ELEGOO Mini Heater with a close-up of its digital display showing '23.5' and a diagram illustrating the internal air filtration layers.

Image: The Mini Heater displaying its temperature, with an inset showing the multi-layer air filtration system.

5.2 ELEGOO Stainless Steel Funnel Maintenance

  • تنظيف: After each use, clean the funnel and mesh filter thoroughly with isopropyl alcohol (IPA) or a resin cleaner. Ensure all resin residue is removed to prevent clogging and cross-contamination.
  • تنظيف الفرشاة: Use IPA to clean the included brush after cleaning the funnel and filter.
  • تخزين: Store the clean and dry funnel and filter in a safe place to prevent damage or contamination.

6. استكشاف الأخطاء وإصلاحها

6.1 Mini Heater Issues

  • عدم تشغيل السخان: Check if the power cable is securely connected and the power switch is in the 'ON' position. Ensure the power outlet is functional.
  • Resin still too cold/printing issues: Verify the heater is correctly installed and operating. Ensure the ambient room temperature is not excessively low, which might challenge the heater's ability to maintain 25°C.
  • روائح غير عادية: Check if the air filter needs replacement. Ensure the printer's ventilation system is adequate.

6.2 Funnel Issues

  • Slow resin filtration: The mesh filter may be partially clogged with cured resin or debris. Clean the filter thoroughly with IPA and the included brush.
  • Resin leaking: Ensure the funnel is properly seated in the resin bottle opening and that there are no cracks or damage to the funnel.

7. المواصفات

7.1 ELEGOO Mini Heater

  • التحكم في درجة الحرارة: Smart automatic heating below 25°C, stops at or above 25°C.
  • عنصر التسخين: PTC Heating Block.
  • سرعة المروحة: 10000R/MIN High-Speed Fan.
  • سمات: Air Filtration Module.
  • التوافق: ELEGOO Saturn Series, Mars Series, Jupiter SE 3D Printers.

7.2 ELEGOO 3D Stainless Steel Funnel

  • مادة: الفولاذ المقاوم للصدأ.
  • Funnel Dimensions: Approximately 110mm (4.3in) top diameter, 100mm (3.9in) height.
  • Spout Diameter: Approximately 15.7mm (0.6in).
  • أبعاد الفلتر: Approximately 48mm (1.9in) diameter, 51mm (2in) height.
  • أبعاد الفرشاة: Approximately 95mm (3.7in) length, 51mm (2in) brush head length.
  • الملحقات المتضمنة: Fine mesh filter, cleaning brush, disposable gloves.
Diagram showing the dimensions of the ELEGOO Stainless Steel Funnel, filter, and brush in millimeters and inches.

Image: Detailed dimensions for the stainless steel funnel, filter, and brush.

8. الضمان والدعم

8.1 معلومات الضمان

For detailed warranty information regarding your ELEGOO products, please refer to the official ELEGOO website or the warranty card included with your purchase. Warranty terms typically cover manufacturing defects under normal use conditions.

8.2 دعم العملاء

If you encounter any issues or have questions about your ELEGOO Mini Heater or Stainless Steel Funnel, please contact ELEGOO customer support through their official webالموقع أو معلومات الاتصال المذكورة في عبوة المنتج. يمكنك أيضًا زيارة متجر ELEGOO على أمازون لمزيد من المعلومات حول المنتج وموارد الدعم.

المستندات ذات الصلة - Mini Heater and Stainless Steel Funnel Kit

قبلview دليل إعدادات طباعة راتنج ELEGOO Mars 4
دليل شامل لدرجات حرارة بيئة الطباعة المثالية وإعدادات الراتنج لطابعة ELEGOO Mars 4 ثلاثية الأبعاد، والذي يغطي أنواعًا مختلفة من الراتنج بما في ذلك الراتنجات القياسية، وABS-Like، والقابلة للغسل في الماء، والنباتية، و8K، والحرارية، وراتنجات الأسنان.
قبلview دليل إعدادات طابعة ELEGOO Saturn 4 Ultra 16K Resin ثلاثية الأبعاد
دليل شامل لإعدادات الطباعة لمختلف الراتنجات على طابعة ELEGOO Saturn 4 Ultra 16K ثلاثية الأبعاد، بما في ذلك أوقات التعرض الموصى بها، وارتفاعات الطبقات، والمعلمات الأخرى للحصول على نتائج مثالية.
قبلview دليل إعدادات راتنج الطابعة ثلاثية الأبعاد ELEGOO Mars 4 Ultra
دليل شامل لإعدادات الراتنج لطابعة ELEGOO Mars 4 Ultra ثلاثية الأبعاد، يغطي أنواعًا مختلفة من الراتنج ومعايير الطباعة المثلى الخاصة بها.
قبلview دليل إعدادات الراتنج لطابعة ELEGOO Saturn 4 Ultra ثلاثية الأبعاد
دليل شامل لمعايير الطباعة لأنواع الراتنج المختلفة باستخدام طابعة ELEGOO Saturn 4 Ultra ثلاثية الأبعاد، بما في ذلك أوقات التعريض وارتفاع الطبقة وسرعات الرفع.
قبلview دليل إعدادات راتنج الطابعة ثلاثية الأبعاد ELEGOO Saturn 4
دليل شامل لمعايير الطباعة المثلى لمختلف أنواع راتنجات ELEGOO Saturn 4، بما في ذلك الراتنجات القياسية، والمشابهة لراتنج ABS، والقابلة للغسل بالماء، والنباتية، والراتنجات المتخصصة للأسنان، و8K. يغطي إعدادات مثل التعريض السفلي، والتعريض العادي، وارتفاع الطبقة، ومسافة وسرعة رفع Z، وسرعة سحب Z.
قبلview دليل معلمات وإعدادات الطباعة بالراتنج لطابعة ELEGOO Saturn 4 Ultra
دليل شامل يُفصّل درجات حرارة الطباعة المثلى، وأنواع الراتنج، وأوقات التعريض، وارتفاعات الطبقات، وغيرها من الإعدادات المهمة لطابعة ELEGOO Saturn 4 Ultra ثلاثية الأبعاد. يغطي هذا الدليل تركيبات راتنج متنوعة، بما في ذلك الراتنج القياسي، والراتنج الشبيه بـ ABS، والراتنج القابل للغسل بالماء، وأنواع متخصصة.