1. انتهى المنتجview
The VEVOR Vacuum Stand HLFGSJLG-01 is designed to provide a stable and organized storage solution for various cordless upright vacuum cleaners and their accessories. This stand helps to keep your vacuum and tools neatly arranged and easily accessible without the need for wall drilling.
Image 1.1: The VEVOR Vacuum Stand HLFGSJLG-01 providing organized storage for a cordless vacuum and its attachments.
Image 1.2: The vacuum stand shown both as individual components and fully assembled, alongside a compatible vacuum cleaner.
2. التوافق
This vacuum stand is compatible with a wide range of cordless upright vacuum cleaner models.
- V-Series: V6، V7، V8، V10، V11، V15
- DC-Series: DC30, DC31, DC34, DC35, DC58, DC59, DC62, DC74
Note: The vacuum stand only. Charger dock and vacuum accessories are not included.
Image 2.1: Visual representation of compatible vacuum models, including V6, V7, V8, V10, V11, and V15 series.
3. محتويات العبوة
تأكد من وجود كافة المكونات قبل البدء بالتجميع.
- 1 × قاعدة
- 1 x Bottom Bracket
- 1 x Middle Bracket
- 1 x Top Bracket
- 4 × الموصلات
- 1 x Cross Screwdriver
- 1 x 8 mm Open Wrench
- 1 x L-shaped Hex Wrench
- 16 x Round Head Screws (M4 x 8)
- 2 x Countersunk Screws (M5 x 20)
- 4 × براغي (M6 × 25)
- 1 × دليل المستخدم
الصورة 3.1: تفصيلية view of all components and tools included in the package, along with product specifications.
4. تعليمات التجميع
Follow these steps for quick and easy assembly. No drilling is required.
- الخطوة 1: قم بتثبيت القاعدة
Attach the main support pole to the weighted base using the provided screws and tools. Ensure the base is stable. - Step 2: Attach the Hooks
Secure the accessory hooks to the main support pole at desired heights. The stand includes 6 hooks for various attachments. - الخطوة 3: تركيب اللوحة العلوية
Connect the top bracket to the upper section of the main support pole. - Step 4: Mount the Charger
If desired, mount your vacuum's charger dock onto the top panel using the appropriate screws.
Image 4.1: Step-by-step assembly guide for the VEVOR Vacuum Stand, illustrating base installation, hook attachment, top panel installation, and charger mounting.
5. التشغيل والاستخدام
The VEVOR Vacuum Stand provides convenient storage and easy access to your vacuum cleaner and its accessories.
- Vacuum Placement: Place your cordless upright vacuum cleaner onto the designated holder at the top of the stand.
- تخزين الملحقات: Utilize the 6 hooks to store various vacuum attachments such as flexible crevice tools, soft dusting brushes, stubborn dirt tools, and soft roller cleaner heads. Each hook supports up to 11.02 lbs (5 kg).
- استقرار: The stand features a 3.96 lbs (1.8 kg) weighted base and anti-slip pads to ensure stability and prevent tipping or sliding.
- تصميم موفر للمساحة: The compact base (11.41 x 11 inches) allows the stand to fit into corners or narrow areas, optimizing vertical space.
Image 5.1: Illustration of how to organize vacuum and accessories on the stand, labeling storage points for charger, vacuum, and various tools.
Image 5.2: The stand positioned in a room corner, highlighting its compact footprint and efficient layered storage for accessories.
6. الصيانة
To ensure the longevity and appearance of your VEVOR Vacuum Stand, follow these simple maintenance guidelines:
- تنظيف: امسح الحامل بانتظام بقطعة قماش ناعمة.amp استخدم قطعة قماش لإزالة الغبار والأوساخ. تجنب استخدام المنظفات الكاشطة أو المذيبات التي قد تتلف السطح.
- تقتيش: افحص جميع البراغي والوصلات دوريًا للتأكد من إحكامها. أعد ربطها إذا لزم الأمر للحفاظ على ثباتها.
- الموقع: Place the stand on a flat, level surface to prevent instability.
7. استكشاف الأخطاء وإصلاحها
If you encounter any issues with your vacuum stand, refer to the following common solutions:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الحامل متذبذب أو غير مستقر. | Screws are loose; uneven surface. | Ensure all screws are tightened securely. Move the stand to a flat, level surface. |
| Accessories do not fit on hooks. | Incorrect accessory type; hooks not positioned correctly. | Verify that your accessories are compatible. Adjust hook positions if necessary. |
| أجزاء مفقودة أثناء التجميع. | خطأ في التعبئة والتغليف. | Refer to the "Package Contents" section and contact VEVOR customer support if parts are missing. |
8. المواصفات
Detailed specifications for the VEVOR Vacuum Stand HLFGSJLG-01:
- اسم الموديل: موقف فراغ
- رقم موديل المنتج: HLFGSJLG-01
- ماركة: فيفور
- لون: أسود
- المادة الرئيسية: Cold-rolled SPCC Steel
- أبعاد المنتج (الطول × العرض × الارتفاع): 11.42 بوصة × 11.02 بوصة × 50 بوصة (290 × 280 × 1270 مم)
- وزن المنتج: 8.59 رطل (3.9 كجم)
- Hook Capacity: Up to 11.02 lbs (5 kg) per hook
- ميزة خاصة: توفير المساحة
- التجميع مطلوب: نعم
- الاستخدام الداخلي/الخارجي: داخلي
- Compatible Vacuum Brands and Models: V6, V7, V8, V10, V11, V15, DC30, DC31, DC34, DC35, DC58, DC59, DC62, DC74 Series Upright Vacuums
Image 8.1: Detail of the stand's sturdy base, indicating its weight (3.96 lbs / 1.8 kg) and thickness (0.16 in / 4 mm).
9. الضمان والدعم
للحصول على معلومات الضمان أو الدعم الفني، يرجى الرجوع إلى موقع VEVOR الرسمي webالموقع أو اتصل بخدمة العملاء الخاصة بهم مباشرة.
فيفور الرسمي Webموقع: www.vevor.com
