Exped MegaMat Duo Queen Self-Inflating Sleeping Mat Instruction Manual

مقدمة

The Exped MegaMat Duo Queen is a premium self-inflating sleeping mat designed for superior comfort during tent and car camping. Featuring 4 inches of cored foam, it provides excellent insulation and support, ideal for various sleeping positions, including side sleepers. Its innovative design ensures a luxurious sleep surface and ease of use.

Image: The Exped MegaMat Duo Queen, highlighting its comfort features.

الإعداد والتضخم

Initial Self-Inflation

1. Unroll the MegaMat Duo Queen on a clean, flat surface.
2. Locate the two flat valves on the mat. One is for inflation (marked 'IN' or with an arrow pointing in), and the other is for deflation (marked 'OUT' or with an arrow pointing out).
3. Open the 'IN' valve. The mat will begin to self-inflate as the open-cell foam expands. Allow 15-20 minutes for the mat to draw in air.
4. Once the mat has largely self-inflated, close the 'IN' valve.

Adjusting Firmness with Top-Up Pump

For desired firmness, use the included Top-Up Pump:

1. Ensure the 'IN' valve is closed.
2. Attach the Top-Up Pump to the 'IN' valve.
3. Pump air into the mat until your preferred firmness is reached.
4. Remove the pump and securely close the 'IN' valve.

الصورة: مفصلة view of the mat's valves and the Top-Up Pump connection point.

ملحوظة: To release air for a softer feel, briefly open the 'IN' valve to let out a small amount of air, then close it securely.

Operating the Mat

The MegaMat Duo Queen is designed for maximum comfort and versatility:

• Optimal Sleeping Surface: The 3D vertical sidewall construction eliminates edge tapering, providing a flat and consistent sleeping area across the entire mat.
• Luxurious Fabric: The 100% recycled 4-way stretch tricot polyester fabric offers a soft, cradling surface, enhancing sleep comfort.
• تصميم معزول: High-quality open-cell polyurethane foam with increased coring provides excellent insulation (R-Value: 8.1), keeping you warm in various conditions.

Image: A hand pressing on the mat's surface, illustrating its plushness and support.

الصيانة والتخزين

الانكماش والتعبئة

1. Open the 'OUT' valve (marked with an arrow pointing out). Air will begin to escape.
2. Starting from the end opposite the valves, tightly roll the mat, pressing out as much air as possible.
3. Once rolled, close the 'OUT' valve to prevent air from re-entering.
4. Secure the rolled mat with the integrated straps.
5. Place the mat into its SideWinder stuff sack for compact storage.

Image: The Exped MegaMat Duo Queen rolled and secured, ready for transport.

التنظيف والعناية

• Clean the mat surface with a damp قطعة قماش وصابون خفيف. تجنب المواد الكيميائية القاسية.
• Ensure the mat is completely dry before storing to prevent mildew.
• Store the mat unrolled with valves open in a cool, dry place if possible, to prolong foam life.

طقم إصلاح

A temporary repair kit is included for minor punctures. Follow the instructions provided with the repair kit for proper application.

استكشاف الأخطاء وإصلاحها

• Mat not fully inflating: Ensure both valves are open during initial self-inflation. If the mat is new or has been stored compressed for a long time, it may take longer to fully expand. Assist by adding air with the Top-Up Pump.
• Air leaking: Check that both valves are securely closed. Inspect the mat surface for punctures. Use the included repair kit for small holes.
• Difficulty rolling up: Ensure the 'OUT' valve is fully open. Apply steady pressure while rolling to expel air.

تحديد

Image: Detailed specifications for the MegaMat Duo Queen.

الضمان والدعم

For warranty information or product support, please refer to the documentation included with your Exped MegaMat Duo Queen or visit the official Exped webالموقع. احتفظ بإثبات الشراء الخاص بك لاستخدامه في أي مطالبات بالضمان.