دليل مستخدم نظام مضخة حرارية مركزية عاكسة ACiQ سعة 2.5 طن وكفاءة طاقة 17 SEER2

1. المقدمة

This manual provides essential information for the installation, operation, and maintenance of your ACiQ 2.5 Ton 17 SEER2 Central Inverter Heat Pump System. This system is designed to provide efficient heating and cooling for residential and light commercial applications. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and safety.

2. معلومات السلامة

Always prioritize safety. Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Consult a qualified installer, service agency, or the gas supplier for information or assistance. The information contained in this manual is intended for use by qualified service personnel only.

• السلامة الكهربائية: Ensure the power supply is disconnected before performing any service or maintenance. All electrical wiring must comply with local and national electrical codes.
• التعامل مع المبردات: This system uses R-454B refrigerant. Only certified technicians should handle refrigerants.
• تثبيت: Installation must be performed by a licensed HVAC professional.
• معدات الحماية الشخصية: Always wear appropriate personal protective equipment (PPE) such as gloves and safety glasses during installation and maintenance.

3. الميزات الرئيسية

• تكنولوجيا العاكس: Provides precise temperature control, reduced energy consumption, and quieter operation.
• كفاءة عالية: 18.8 SEER2 and 9.7 HSPF2 ratings for energy savings.
• نطاق تشغيل واسع: Reliable performance from -13°F to 122°F.
• التشغيل الهادئ: Indoor noise levels as low as 44 dBA, outdoor unit at 60 dBA.
• المكونات المتينة: Rotary compressor, aluminum coil, and fiberglass-free insulation.
• المبردات الصديقة للبيئة: Utilizes R-454B refrigerant.
• التثبيت المرن: Supports horizontal and vertical air handler installation.
• عناصر التحكم الذكية: Compatible with wired controllers, WiFi, and third-party thermostats.
• Integrated Back-up Heat: Includes a 10kW back-up heat kit for supplemental heating.

4. مكونات أكثرview

The ACiQ 2.5 Ton 17 SEER2 Central Inverter Heat Pump System includes the following main components:

• Outdoor Condensing Unit (Heat Pump)
• وحدة معالجة الهواء الداخلية
• 10kW Back-up Heat Kit
• 30' Line Set
• Gauge Electrical Whip
• 60A Non-Fused Disconnect Switch
• واي فاي ترموستات
• عرام حامي
• محول شحن CPS
• كم الجدار

الشكل 1: زيادةview of the ACiQ 2.5 Ton 17 SEER2 Central Inverter Heat Pump System, showing the outdoor unit, indoor air handler, 10kW back-up heat kit, thermostat, line set, and various installation accessories.

5. الإعداد والتثبيت

Installation of this ACiQ heat pump system requires specialized knowledge and tools. It must be performed by a qualified and licensed HVAC technician to ensure safety, compliance with local codes, and optimal performance. Refer to the detailed installation manual provided with the product for specific instructions.

5.1 فحوصات ما قبل التثبيت

• Verify that the electrical supply matches the unit's requirements (Indoor: 115/208/230V, 60Hz, 1Ph; Outdoor: 208/230V, 60Hz, 1Ph).
• تأكد من توفير مساحة كافية لكل من الوحدات الداخلية والخارجية، مما يسمح بتدفق الهواء المناسب وسهولة الوصول للصيانة.
• Confirm that the maximum piping length (164 ft / 50m) and height difference (82 ft / 25m) are not exceeded.

5.2 Air Handler Installation

The indoor air handler unit is designed for flexible installation, supporting upflow, downflow, and horizontal configurations to suit various space requirements.

الشكل 2: Diagram illustrating the multi-positional capabilities of the indoor air handler unit, showing options for upflow, downflow, and horizontal installation.

5.3 وضع الوحدة الخارجية

Consider the outdoor unit's dimensions and required clearances for optimal performance and maintenance. The unit features a compact design compared to traditional systems.

الشكل 3: Graphic comparing the smaller footprint of the ACiQ outdoor unit (20 inches clearance) versus a traditional unit (36 inches clearance), highlighting its high efficiency and self-cleaning features.

6. تعليمات التشغيل

Your ACiQ heat pump system offers advanced control options for comfortable and efficient operation.

6.1 أوضاع التشغيل الأساسية

• وضع التبريد: Provides cooling with a capacity of 31,000 BTU/hr. Operates efficiently from -13°F to 122°F ambient temperatures.
• وضع التدفئة: Provides heating with a capacity of 30,000 BTU/hr at 47°F. Reliable warmth down to -13°F. The 10kW back-up heat kit provides supplemental heat when needed.
• وضع المروحة: يقوم بتدوير الهواء دون تسخين أو تبريد.
• نظام آلي: يتم التبديل تلقائيًا بين التدفئة والتبريد للحفاظ على درجة الحرارة المحددة.

الشكل 4: The ACiQ outdoor unit installed on a patio, demonstrating its ability to operate effectively in extreme heat conditions, up to 122°F.

الشكل 5: The ACiQ outdoor unit partially covered in snow, illustrating its capability to operate in extreme cold temperatures, down to -13°F.

6.2 أدوات التحكم الذكية

The system can be controlled via the included wired thermostat, WiFi-enabled app, or compatible third-party thermostats. The WiFi app allows for remote control and monitoring of your system.

الشكل 6: Image showing the ACiQ Smart Home mobile application interface on a smartphone alongside a wired thermostat, demonstrating the system's smart control capabilities for climate management.

7. الصيانة

Regular maintenance ensures the longevity and efficiency of your ACiQ heat pump system. Always disconnect power before performing any maintenance.

• استبدال فلتر الهواء: Check and replace air filters in the indoor air handler every 1-3 months, or more frequently if needed. Dirty filters restrict airflow and reduce efficiency.
• تنظيف الوحدة الخارجية: Keep the outdoor unit free from debris, leaves, and dirt. Periodically clean the coils with a soft brush or water hose (ensure power is off).
• نظام الصرف الصحي: Ensure the condensate drain line is clear and free of blockages to prevent water overflow.
• التفتيش المهني: Schedule annual inspections and maintenance by a qualified HVAC technician.

8. استكشاف الأخطاء وإصلاحها

This section provides solutions for common issues. For complex problems, contact a qualified HVAC technician.

• لا يوجد طاقة: Check circuit breakers and ensure the disconnect switch is in the ON position.
• عدم كفاية التدفئة/التبريد: Verify thermostat settings, check air filters for blockage, and ensure outdoor unit is not obstructed.
• ضوضاء غير عادية: تُعتبر الأصوات التشغيلية الطفيفة طبيعية. أما الأصوات العالية أو غير المعتادة فقد تشير إلى وجود مشكلة تتطلب فحصًا من قبل متخصص.
• تسرب المياه: Check condensate drain line for blockages.

9. المواصفات

الشكل 7: Image displaying the dimensions of both the indoor air handler unit (49.02" H x 21.02" W x 21.02" D) and the outdoor condensing unit (35.04" H x 37.24" W x 16.14" D).

الشكل 8: Chart detailing the cooling capacity of the ACiQ system at various outdoor temperatures: 86°F (118% capacity), 95°F (113% capacity), 110°F (99% capacity), and 122°F (48% capacity).

الشكل 9: Chart detailing the heating capacity of the ACiQ system at various outdoor temperatures: -22°F (N/A), -13°F (41% capacity), 0°F (57% capacity), 17°F (70% capacity), and 32°F (73% capacity).

10. الضمان والدعم

ACiQ offers a comprehensive warranty for this heat pump system:

• ضمان قطع الغيار: سنتان
• ضمان الضاغط: سنتان

These warranty terms are valid when the system is installed by a certified technician and registered online with the manufacturer. For technical support, service inquiries, or warranty claims, please refer to the contact information provided in your product packaging or visit the official ACiQ webموقع.