Sunco Lighting GD_BC2_SR-BK-3070K-6PK

Sunco 6 Pack 2W Solar Sidewalk Path Lights Instruction Manual

Model: GD_BC2_SR-BK-3070K-6PK

1. المقدمة

This manual provides instructions for the installation, operation, and maintenance of your Sunco 6 Pack 2W Solar Sidewalk Path Lights. These solar-powered lights are designed for outdoor use, offering 100 lumens of brightness and selectable color temperatures (3000K, 5000K, 7000K) with automatic dusk-to-dawn functionality.

Sunco LED Solar Sidewalk Light banner showing key features: 100 Lumens, 50 LM/W, Auto On/Off, 2000 mAh Battery, and USA American Company logo.

الصورة: أكثر منview of the Sunco LED Solar Sidewalk Light highlighting its features.

2. مواصفات المنتج

  • عملية تعمل بالطاقة الشمسية: Utilizes solar energy for charging, eliminating the need for external wiring or power sources.
  • 3-in-1 Color Temperature (3CCT): Offers selectable color temperatures of 3000K (Warm White), 5000K (Cool White), and 7000K (Daylight) to suit various preferences.
  • وظيفة من الغسق إلى الفجر: Equipped with a built-in photocell sensor that automatically turns the lights on at dusk and off at dawn.
  • تصميم مقاوم للطقس: Constructed with durable plastic and rated IP65 for protection against dust and water ingress, suitable for outdoor environments.
  • سطوع: Provides 100 lumens of illumination per light unit.
  • Integrated CCT Switch: Allows for easy selection of desired color temperature.
  • ارتفاع قابل للتعديل: Includes extension poles for customizable height during installation.
Multiple Sunco solar path lights illuminating a garden path in three different color temperatures: warm white, cool white, and daylight.

Image: Sunco solar path lights demonstrating the three selectable color temperature options.

3. محتويات العبوة

تأكد من وجود جميع المكونات في الحزمة الخاصة بك:

  • 6 x Solar Path Light Heads
  • 6 x Upper Pole Segments
  • 6 x Lower Pole Segments
  • 6 × حصص أرضية
  • 1 × دليل التعليمات

4. معلومات هامة حول السلامة

  • تم تصميم هذا المنتج لـ للاستخدام الخارجي فقط. Do not install indoors.
  • Ensure the installation location does not create a tripping hazard.
  • Do not attempt to disassemble, repair, or modify the light unit. This may void the warranty and pose a safety risk.
  • احرص على إبقاء اللوحة الشمسية نظيفة لضمان كفاءة الشحن المثالية.
  • Avoid placing the lights near open flames or sources of extreme heat.
  • Dispose of the lithium-ion battery in accordance with local regulations.

5. الإعداد والتثبيت

5.1. Assemble the Light Unit

Connect the pole segments together, then attach them to the light head. You can use one or both pole segments to adjust the height of the light.

Diagram showing three steps for setting up the solar path light: 1. Connect plug & pole, 2. Select color temperature, 3. Place into ground.

Image: Visual guide for connecting the pole and light head.

5.2. Select Color Temperature (CCT)

Locate the CCT switch on the underside of the light head. Slide the switch to select your desired color temperature: 3000K (Warm White), 5000K (Cool White), or 7000K (Daylight).

Image showing a hand adjusting a small switch on the underside of the solar light head, with three examples of the light output at 3000K, 5000K, and 7000K.

Image: Demonstrating the selectable CCT switch and its effect on light color.

5.3. Optimal Placement for Solar Charging

For optimal performance, place the solar path lights in an area that receives direct sunlight for at least 6-8 hours daily. Avoid shaded areas caused by trees, buildings, or other obstructions. Also, ensure the lights are not placed directly under streetlights or other strong light sources, as this may interfere with the dusk-to-dawn sensor and prevent the lights from activating.

Diagram showing correct placement of a solar light in the ground and incorrect placement under a tree or street lamp, which would hinder charging or activation.

Image: Guide for proper light placement to ensure effective solar charging and operation.

5.4. Secure in Ground

Attach the ground stake to the bottom pole segment. Firmly push the assembled light into the soil. Ensure the light is stable and upright.

6. تعليمات التشغيل

6.1. Automatic Dusk-to-Dawn Functionality

Once installed and exposed to sunlight, the lights will automatically charge during the day. At dusk, the built-in photocell sensor will detect low light conditions and activate the lights. They will remain illuminated throughout the night and turn off automatically at dawn.

Split image showing a solar light in a garden during daytime, labeled 'Daytime Charging', and the same light illuminated at night, labeled 'Nighttime Brightness'.

Image: Illustration of the light's automatic charging during the day and illumination at night.

6.2. ضبط درجة حرارة اللون

The color temperature can be changed at any time using the CCT switch located on the light head. Adjust the switch to cycle between 3000K, 5000K, and 7000K to achieve your desired lighting effect.

Three close-up images of a single solar path light, each showing a different color temperature: 3000K warm white, 5000K cool white, and 7000K daylight.

الصورة: عن قرب view of the solar light demonstrating the three distinct color temperature outputs.

7. الصيانة

  • تنظيف: امسح اللوحة الشمسية بانتظام بقطعة قماش ناعمة.amp استخدم قطعة قماش لإزالة الغبار والأوساخ والشوائب. تضمن لوحة الطاقة الشمسية النظيفة أقصى كفاءة شحن.
  • تقتيش: Periodically check the lights for any signs of damage or wear. Ensure the ground stakes are firmly in place.
  • مقاومة الطقس: The lights are designed to be weatherproof (IP65 rated), but extreme weather conditions may affect performance. Ensure proper drainage around the base of the lights.
A Sunco solar path light in a garden during rainfall, with a 'Wet-Rated' label, demonstrating its weatherproof design.

Image: The solar path light shown enduring rain, highlighting its weatherproof construction.

8. استكشاف الأخطاء وإصلاحها

مشكلةالسبب المحتملحل
الضوء لا يضيء في الليل.Insufficient solar charge; light sensor activated by other light sources.Ensure the solar panel receives 6-8 hours of direct sunlight daily. Relocate the light away from streetlights or other bright lights.
Light is dim or turns off too early.Inadequate solar charging; dirty solar panel; battery degradation.Clean the solar panel. Ensure optimal sun exposure. If the issue persists after prolonged charging, the battery may need replacement (contact support).
وميض الضوء.Loose connection; low battery charge.Check all pole connections. Ensure the light receives sufficient solar charge.

9. المواصفات الفنية

ميزةالتفاصيل
رقم الموديلGD_BC2_SR-BK-3070K-6PK
سطوع100 لومن
واتtage2 واط
درجة حرارة اللون3000K / 5000K / 7000K (قابلة للتحديد)
مصدر الطاقةSolar (DC)
نوع البطارية1 بطارية ليثيوم أيون (2000 مللي أمبير في الساعة)
مادةبلاستيك
مستوى مقاومة الماءIP65 (ماء)
أبعاد المنتج14.57 بوصة طول × 13.46 بوصة عرض × 5.6 بوصة ارتفاع
وزن العنصر12.8 أونصات
زاوية الشعاع110°
كفاءة50 LM / W
رمز المنتج الموحد840360610972
Diagram showing the dimensions of the solar path light, including a height of 28.5 inches and a light head width of 4.8 inches, along with key specifications like 100 Lumens, 50 LM/W, 0.8 Lbs weight, and 2000 mAh Lithium-ion battery.

Image: Detailed dimensions and key technical specifications of the solar path light.

10. الضمان ودعم العملاء

Sunco Lighting provides a ضمان لمدة سنتين for this product, ensuring quality and reliability. For any questions, technical assistance, or warranty claims, please contact our USA-based support specialists.

المنتج انتهىview فيديو

فيديو: أكثر منview of the Sunco Selectable Solar Sidewalk Light, demonstrating its features and functionality.

About Sunco Lighting

Video: Learn more about Sunco Lighting, their commitment to quality, and customer-focused approach.

المستندات ذات الصلة - GD_BC2_SR-BK-3070K-6PK

قبلview دليل تركيب كشافات الإضاءة LED من Sunco: تعليمات خطوة بخطوة
دليل تركيب شامل لكشافات الإضاءة LED من Sunco، يغطي احتياطات السلامة، والتركيب، والتوصيلات الكهربائية، وإعدادات درجة حرارة اللون، وتركيب الخلايا الضوئية، واستكشاف الأعطال وإصلاحها. يتضمن رسومات تخطيطية مفصلة ووصفًا ومعلومات عن التوصيلات الكهربائية.
قبلview دليل تركيب مجموعة الحائط نصف الدائرية: واط قابل للتحديدtagتركيبات إضاءة LED من نوع e وCCT
دليل تركيب شامل لمجموعة إضاءة Sunco Lighting الجدارية نصف الدائرية، والتي تتميز بإمكانية اختيار الإضاءةtagوظائف الخلية الضوئية e وCCT ووظيفة التشغيل من الغسق إلى الفجر. يتضمن تحذيرات السلامة، وتعليمات التركيب خطوة بخطوة، ومخططات الأسلاك، وتكوين مفتاح DIP.
قبلview LED Center Basket Troffers Installation Instructions
Comprehensive installation guide for Sunco Lighting's LED Center Basket Troffers, covering safety precautions, wiring, and field adjustments for wattagه ودرجة حرارة اللون.
قبلview دليل المستخدم والمواصفات الفنية لمصابيح LED الخارجية الدائمة من شركة Sunco Lighting طراز SH-C5107-B
معلومات تفصيلية عن مصابيح LED الخارجية الدائمة SH-C5107-B من شركة Sunco Lighting، تشمل الميزات، وبيانات المنتج، والأبعاد، والتركيب، واستخدام التطبيق. حاصلة على تصنيف IP65، ومتوافقة مع تقنيتي Bluetooth وWi-Fi.
قبلview Sunco Lighting Dusk to Dawn LED Barn Light - 55W, 5000K, IP65 Rated Outdoor Fixture
Discover the Sunco Lighting 55W Dusk to Dawn LED Barn Light. This IP65 rated fixture delivers 7150 lumens at 5000K, featuring a built-in photocell, durable aluminum construction, and a 5-year warranty. Ideal for area, barn, and warehouse lighting.
قبلview دليل المستخدم وأفضل الممارسات لمصابيح LED من نوع Sunco Lighting التي تعمل من الغسق إلى الفجر
تعرّف على كيفية استخدام مصابيح ووحدات إضاءة LED من Sunco Lighting التي تعمل تلقائيًا من الغسق إلى الفجر للإضاءة الخارجية. يغطي هذا الدليل تقنية الخلايا الضوئية، ونصائح التركيب، وأفضل الممارسات لتحقيق الأداء الأمثل.