1. المقدمة
Thank you for choosing the SOLLA 500W LED Flood Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new flood light. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: SOLLA 500W LED Flood Light. This image displays the front view of the black rectangular flood light with its integrated bracket and exposed wiring.

الصورة 1.2: مثال تطبيقيamples of the SOLLA 500W LED Flood Light. This collage shows the flood light illuminating a baseball field, a large outdoor court, an indoor warehouse, and the exterior of a building at night.
2. تعليمات السلامة
لضمان التشغيل الآمن ومنع التلف، يرجى مراعاة احتياطات السلامة التالية:
- السلامة الكهربائية: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Ensure power is disconnected before installation or maintenance.
- التأريض: The fixture must be properly grounded to prevent electrical shock.
- المجلدtage: تأكد من أن حجم العرضtage (110-265V AC) matches the requirements of the flood light.
- التوصيلات الكهربائية: Ensure all wire connections are secure and properly insulated. This flood light requires hard-wiring; it does not come with a plug.
- التركيب: Mount the fixture securely to a stable surface capable of supporting its weight.
- درجة حرارة التشغيل: Do not operate the light in environments exceeding its specified operating temperature range.
- مصدر الضوء: Do not stare directly into the LED light source when it is illuminated, as this may cause eye strain or damage.
- التعديلات: Do not attempt to modify or disassemble the fixture. This will void the warranty and may pose a safety hazard.
3. مواصفات المنتج
The SOLLA 500W LED Flood Light is designed for high-performance outdoor illumination, offering:
- عالية السطوع: Equipped with 678 high-quality LED beads, delivering 50,000 lumens of 3000K warm white light. This is equivalent to a 2250W metal halide lamp, providing significant energy savings.
- Extended Lifetime: Features an aluminum alloy housing with high thermal conductivity, ensuring efficient heat dissipation and a lifespan exceeding 50,000 hours.
- مقاومة الطقس: IP66 rated for protection against dust and powerful water jets. Includes 4KV surge protection to safeguard against lightning and power surges during thunderstorms.
- بناء متين: The metal bracket is designed for high-temperature resistance (up to 120°C) and anti-aging performance, allowing for easy adjustment and secure installation.
- التثبيت متعدد الاستخدامات: Can be easily mounted on walls, floors, or ceilings with simple wiring steps.

Image 3.1: Illumination range of the SOLLA 500W LED Flood Light. This image highlights the light's ability to cover an area of 5000 sq. ft. and its features: AC 110-265V input, efficient driver, no flickering, and over 50,000 hours lifespan.

Image 3.2: Weather resistance features. This image illustrates the 4KV surge protection and IP66 waterproof rating of the flood light, showing it with raindrops and a lightning bolt graphic.
4. الإعداد والتثبيت
Before beginning installation, ensure the power supply is turned off at the circuit breaker.
4.1 محتويات العبوة
تأكد من وجود جميع المكونات:
- SOLLA 500W LED Flood Light Unit
- قوس تصاعد متكامل
- دليل التعليمات
4.2 خيارات التركيب
The flood light can be installed in various configurations:
- التثبيت على الحائط: Secure the bracket to a vertical surface.
- تركيب الأرضية: Secure the bracket to a horizontal surface.
- التركيب على السقف: Secure the bracket to an overhead surface.

Image 4.1: Product components and mounting types. This image details features like reinforced glass fasteners, a vent hole, and a waterproof joint. It also illustrates the three mounting options: wall, floor, and ceiling mounting, along with the wiring length.
4.3 تعليمات الأسلاك
The flood light requires hard-wiring. Follow these steps:
- تأكد من إيقاف تشغيل مصدر الطاقة.
- Connect the wires from the flood light to your main power supply:
- سلك أخضر / أصفر: الاتصال بالأرض.
- السلك البني: Connect to Live (L).
- السلك الأزرق: Connect to Neutral (N).
- Secure all connections with appropriate wire connectors and ensure they are properly insulated.
4.4 الأبعاد
Refer to the diagram below for the physical dimensions of the flood light.

Image 4.2: Dimensions of the SOLLA 500W LED Flood Light. The image shows the length (25.4in/64.7cm), width (15.1in/38.3cm), and height (17.1in/43.5cm with bracket, 2.6in/6.8cm without bracket) of the fixture.
4.5 Recommended Lighting Distance and Area
The following table provides guidance on suggested mounting heights and illumination areas for optimal performance.

Image 4.3: LED flood light irradiation distance table. This table provides suggested mounting heights, best irradiation distances, acceptable irradiation distances, and total irradiation areas for various wattages, including 500W.
| واتtage | Suggest Mounting Height (m/ft) | Best Irradiation Distance (m/ft) | Accept Irradiation Distance (m/ft) | Irradiation Area (m/ft²) |
|---|---|---|---|---|
| 500 واط | 12-28 / 41-94 | 90 / 394 | 140-150 / 462-495 | 190-250 / 1290-2750 |
5. تعليمات التشغيل
Once properly installed and wired, the SOLLA 500W LED Flood Light operates simply:
- تشغيل/إيقاف التشغيل: Control the light using an external wall switch or circuit breaker connected to the fixture's power supply.
- غير قابلة للتعتيم: This flood light is not dimmable. Do not connect it to a dimmer switch.
6. الصيانة
Regular maintenance ensures optimal performance and longevity of your flood light:
- تنظيف: Periodically clean the surface of the light and lens with a soft, damp قطعة قماش. لا تستخدم منظفات كاشطة أو مذيبات. تأكد من فصل التيار الكهربائي قبل التنظيف.
- تقتيش: افحص الجهاز بانتظام بحثًا عن أي علامات تلف أو وصلات مفكوكة أو تآكل. عالج أي مشكلة على الفور.
- تهوية: Ensure the heat sink fins on the back of the fixture are free from obstructions to allow for proper heat dissipation.
7. استكشاف الأخطاء وإصلاحها
If you encounter issues with your SOLLA 500W LED Flood Light, refer to the following table:
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الضوء لا يضيء | لا يوجد مصدر للطاقة اتصال الأسلاك فضفاض Faulty switch/breaker | Check power supply to the fixture. تأكد من أن جميع توصيلات الأسلاك آمنة. Test or replace the switch/breaker. |
| ومضات الضوء | مصدر طاقة غير مستقر الأسلاك فضفاضة مفتاح التعتيم غير متوافق | Ensure stable power input. التحقق من جميع توصيلات الأسلاك وتأمينها. Remove any dimmer switches; this light is non-dimmable. |
| انخفاض سطوع | أوساخ أو شوائب على العدسة مكونات LED القديمة | تنظيف سطح العدسة. If the light is old, reduced brightness may indicate end of life for some LED components. |
If problems persist after attempting these solutions, please contact SOLLA customer support.
8. المواصفات
Detailed technical specifications for the SOLLA 500W LED Flood Light:
| ميزة | مواصفة |
|---|---|
| ماركة | سولا |
| نموذج | B0CJ9747ZX |
| واتtage | 500 واط |
| التدفق الضوئي | 50,000 لومن |
| درجة حرارة اللون | 3000 كيلو أبيض دافئ |
| المجلدtage | 110-265V AC |
| ما يعادل واتtage | 2250 واط هاليد معدني |
| مادة | الألومنيوم |
| تصنيف IP | IP66 (Waterproof and Dust-tight) |
| حماية من زيادة التيار الكهربائي | 4 كيلو فولت |
| عمر | أكثر من 50,000 ساعة |
| أسلوب | Modern Floodlight |
9. الضمان والدعم
SOLLA offers a 30-day return policy and a warranty for this product. For specific warranty terms, technical assistance, or customer support, please refer to the official SOLLA webالموقع أو اتصل بتاجر التجزئة الخاص بك.
You can visit the SOLLA store for more information: متجر سولا الرسمي


