1. المقدمة
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Sunco LED Shop Light. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for indoor use in environments such as garages, workshops, basements, and warehouses.
2. معلومات السلامة
- افصل الطاقة دائمًا قبل التركيب أو الصيانة.
- تأكد من مصدر الطاقة المجلدtagيتوافق مع متطلبات المنتج (120 فولت).
- لا تحاول تعديل أو تفكيك الجهاز. لا توجد أجزاء قابلة للصيانة من قبل المستخدم في الداخل.
- تجنب تعريض العينين مباشرة لمصدر الضوء عند إضاءته.
- قم بالتثبيت وفقًا للقوانين الكهربائية الوطنية والمحلية.
- This fixture is for indoor use only and is not water resistant.
- يحفظ بعيدًا عن المواد القابلة للاشتعال.
3. محتويات العبوة
تأكد من وجود كافة المكونات قبل البدء في التثبيت:
- LED Shop Light Fixture (48 inches)
- سلك طاقة بطول 5 أقدام
- 10-inch Pull Chain Switch
- Mounting Chains (for suspension mount)
- Screws and Anchors (for surface mount)
- Linkable Connectors (for daisy-chaining multiple units)
الشكل 3.1: Package contents showing the LED shop light, power cord, pull chain, mounting chains, screws, and anchors for installation.
4. المواصفات
| ميزة | التفاصيل |
|---|---|
| رقم الموديل | SH_F-WH-40W-5K-1PK |
| الأبعاد (الطول × العرض × الارتفاع) | 47.24 بوصة × 3.19 بوصة × 1.77 بوصة |
| وزن | 1.55 رطل |
| واتtage | 40 واط |
| سطوع | 4500 لومن |
| درجة حرارة اللون | 5000K Daylight (Cool White) |
| المجلدtage | 120 فولت |
| مادة | Plastic (Polycarbonate Shade) |
| نوع التركيب | Surface Mount, Ceiling Mount (Suspension) |
| طريقة التحكم | سحب سلسلة |
| الاستخدام الداخلي والخارجي | داخلي |
| متوسط الحياة | 50,000 ساعة |
| الشهادات | Energy Star, ETL, FCC |
الشكل 4.1: Product dimensions of the LED shop light.
5. التثبيت
The Sunco LED Shop Light offers two primary installation methods: Surface Mount and Hanging Mount. Choose the method best suited for your application.
5.1. تركيب سطحي
For a flush installation directly against a ceiling or wall surface.
- نقاط تثبيت العلامة: Use the fixture as a template to mark the desired screw locations on the mounting surface. Ensure these points align with the fixture's mounting holes.
- حفر ثقوب تجريبية: Drill pilot holes at the marked locations. If mounting into drywall, insert the provided anchors.
- تركيبات آمنة: Align the fixture with the pilot holes/anchors and secure it using the provided screws.
- توصيل الطاقة: Plug the 5-foot power cord into a standard 120V outlet.
الشكل 5.1: Step-by-step guide for surface mount installation.
5.2. Hanging Mount Installation
For suspending the fixture from the ceiling using chains.
- Install Eye Hooks: Screw the provided eye hooks into a sturdy ceiling joist or appropriate anchor points. Ensure they are spaced correctly to support the fixture evenly.
- Attach Chains: Connect the mounting chains to the eye hooks and to the fixture's hanging points. Adjust chain length to achieve the desired height.
- توصيل الطاقة: Plug the 5-foot power cord into a standard 120V outlet.
الشكل 5.2: Illustration of surface mount and hanging mount installation methods.
5.3. Linkability (Daisy-Chain)
This LED shop light is designed for daisy-chaining, allowing you to connect up to 4 units from a single power source for extended lighting coverage.
- Connect First Fixture: Install the first fixture using either surface or hanging mount and connect its power cord to an outlet.
- Link Additional Fixtures: Use the provided linkable connectors to connect the output end of the first fixture to the input end of the second fixture. Repeat for up to 4 fixtures.
- Secure Linked Fixtures: Ensure all linked fixtures are securely mounted using the appropriate method.
الشكل 5.3: Multiple linked LED shop lights providing extended illumination.
فيديو 5.1: انتهىview of the LED Utility Shop Light, demonstrating its features and installation options, including linkability.
6. التشغيل
To operate the Sunco LED Shop Light:
- Ensure the fixture is properly installed and connected to a power source.
- Pull the attached chain switch to turn the light ON or OFF.
7. الصيانة
The Sunco LED Shop Light requires minimal maintenance.
- تنظيف: افصل التيار الكهربائي قبل التنظيف. امسح الجهاز بقطعة قماش ناعمة وجافة. لا تستخدم منظفات كاشطة أو مذيبات.
- استبدال المصباح: The LED tubes are integrated and not user-replaceable. The fixture has an average lifespan of 50,000 hours.
- تقتيش: Periodically inspect the power cord and mounting hardware for any signs of damage or wear.
8. استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| الضوء لا يعمل. | لا يوجد تيار كهربائي، وصلة مفكوكة، مفتاح معطل. | Check power outlet, ensure power cord is securely plugged in, verify pull chain switch is functioning. |
| وميض الضوء. | طاقة غير مستقرة، اتصال فضفاض. | Check power source stability, ensure all connections are tight. |
| Not all linked lights illuminate. | Loose linkable connector, exceeding maximum linked units. | Ensure all linkable connectors are secure. Do not exceed 4 linked units. |
9. الضمان والدعم
Sunco Lighting offers industry-leading coverage and support for its products. This product is backed by Sunco+ Benefits, providing 7+ years of protection.
For technical assistance, warranty claims, or any questions regarding your Sunco LED Shop Light, please contact our dedicated support team based in the USA. Refer to the product packaging or the official Sunco Lighting webالموقع للحصول على معلومات الاتصال الحالية.
فيديو 9.1: An introductory video about Sunco Lighting, highlighting their commitment to quality and customer support.
