دليل مستخدم نظام الميكروفون اللاسلكي COMICA BoomX-U Qua UHF

1. المقدمة

The COMICA BoomX-U Qua is a professional UHF wireless lavalier microphone system designed for high-quality audio recording. This system features four transmitters and one receiver, making it suitable for multi-person interviews, filming, live streaming, and other professional audio applications. It offers stable signal transmission, versatile compatibility, and convenient monitoring capabilities.

2. محتويات العبوة

تأكد من تضمين جميع العناصر المدرجة أدناه في الحزمة الخاصة بك:

• 1 × جهاز استقبال
• 4 × أجهزة الإرسال
• 4 x Lav Mic
• 4 x Wind Muff
• كابل شحن USB-C متعدد الوظائف 3 في 1
• 1 x 3.5mm TRS-Dual XLR Cable
• 1 × كابل TRS مقاس 3.5 مم
• شنومكس x كاري

Image 2.1: All components of the COMICA BoomX-U Qua system.

الصورة 2.2: تفصيلية view of the included accessories and main units.

3. انتهى المنتجview

The BoomX-U Qua system consists of a receiver and four transmitters, each equipped with a built-in microphone and an input for an external lavalier microphone.

3.1 جهاز إرسال (TX)

• ميكروفون مدمج: For direct audio capture.
• External Lavalier Microphone Input: Connect the included lavalier microphone for discreet placement.
• زر الطاقة/الاقتران: Controls power and initiates pairing.
• مؤشر الحالة: Displays power, pairing, and battery status.

3.2 جهاز استقبال (RX)

• شاشة العرض: Shows channel status, audio levels, battery, and mixing mode.
• أزرار التحكم: For menu navigation, channel selection, and volume adjustment.
• 180° Foldable Antenna: يعزز استقرار الإشارة ومدى وصولها.
• منافذ إخراج الصوت: 3.5mm TRS/TRRS and XLR outputs for various devices.
• Headphone Monitoring Port: للمراقبة الصوتية في الوقت الفعلي.

Image 3.1: Demonstrates the use of the external lavalier microphone versus the transmitter's built-in microphone.

4. دليل الإعداد

4.1 تشغيل/إيقاف التشغيل

1. To power on, press and hold the power button on both the transmitter(s) and receiver until the display or indicator light activates.
2. لإيقاف التشغيل، اضغط مع الاستمرار على زر الطاقة حتى يتم إيقاف تشغيل الجهاز.

4.2 الاتصال بأجهزة التسجيل

The BoomX-U Qua offers wide compatibility with various recording devices:

• DSLR Cameras/Camcorders: Use the 3.5mm TRS cable for connection.
• الهواتف الذكية: Use the 3.5mm TRRS cable. (Note: For iPhones without a 3.5mm jack, an official Lightning to 3.5mm adapter is required. For some Android phones, a USB-C to 3.5mm adapter may be needed.)
• Audio Mixers/Professional Equipment: Use the 3.5mm TRS-Dual XLR cable for balanced audio input.

Image 4.1: Illustrates various connection types and compatible devices including cameras, camcorders, recorders, and smartphones.

4.3 Pairing Transmitters and Receiver

The system supports both auto-scanning and manual channel setting for pairing.

• Auto-scanning: This feature automatically finds and assigns the best available channel, ideal for quick setup in most scenarios. Refer to the receiver's menu for auto-scan options.
• Manual Channel-setting: Allows you to manually select specific channels for each transmitter. This is useful in environments with potential interference or when precise channel management is required.

Image 4.2: Shows the auto-scanning and manual channel setting interface on the receiver.

5. تعليمات التشغيل

5.1 Audio Mixing Modes

The receiver offers flexible audio output options:

• Mixed Output (MIX ALL): All four audio tracks from the transmitters are combined into a single output track. This is suitable for scenarios where a single, combined audio feed is desired.
• Individual Output (MIX None): Each of the four audio tracks is output independently. This allows for greater control during post-production, enabling individual adjustment of each microphone's audio.

Image 5.1: Receiver display showing the 'MIX ALL' mode, combining all four channels.

Image 5.2: Receiver display showing 'MIX None' mode, providing independent audio tracks.

5.2 Real-Time Audio Monitoring

Connect headphones to the receiver's 3.5mm monitoring port to listen to the audio in real-time during recording. This allows for immediate detection and adjustment of any audio issues.

Image 5.3: Diagram illustrating real-time monitoring connection to the receiver.

6. الشحن وعمر البطارية

The BoomX-U Qua system is powered by rechargeable Lithium Polymer batteries. The transmitters have a 700mAh battery, and the receiver has a 1400mAh battery, providing up to 6.5 hours of working time.

• الشحن: Use the included 3-in-1 USB-C charging cable to charge all units simultaneously. Connect the USB-C end to the charging ports on the transmitters and receiver, and the USB-A end to a compatible USB power adapter (not included).
• الشحن أثناء الاستخدام: The system supports charging while operating, ensuring uninterrupted recording sessions.

Image 6.1: Illustrates the charging process for the transmitters and receiver using the 3-in-1 USB-C cable.

7. الصيانة

• Keep the devices dry. Do not expose them to rain or moisture.
• يُخزن في مكان بارد وجاف بعيدًا عن أشعة الشمس المباشرة ودرجات الحرارة القصوى.
• نظف الوحدات بقطعة قماش ناعمة وجافة. تجنب استخدام المواد الكيميائية القاسية أو المنظفات الكاشطة.
• Ensure the antennas are not bent or damaged during transport or storage.
• قم بفحص الكابلات بشكل منتظم بحثًا عن التآكل والتلف.

8. استكشاف الأخطاء وإصلاحها

If you encounter issues with your BoomX-U Qua system, refer to the following common problems and solutions:

9. المواصفات

Key technical specifications for the COMICA BoomX-U Qua system:

10. الضمان والدعم

COMICA products typically come with a standard manufacturer's warranty. For specific warranty details, registration, or technical support, please refer to the warranty card included in your package or visit the official COMICA webالموقع. احتفظ بإيصال الشراء الخاص بك كإثبات للشراء في حالة مطالبات الضمان.