المنتج انتهىview
The B'laster 16-PB-DS ProStraw is a powerful rust penetrating catalyst and lubricant designed to quickly loosen rusted or frozen parts. Its advanced formula not only breaks down rust and corrosion but also provides a non-evaporating lubricant that protects against future rust and weathering, saving time and equipment.
وصف الصورة: A white aerosol can of B'laster Penetrating Catalyst with a yellow cap and a flexible straw attachment. The label highlights "Powerful Rust Penetrating Catalyst" and "Breaks Loose Faster," along with key features like 360° valve and protection against rust.
المميزات الرئيسية:
- ProStraw Design: Features an innovative, patented dual-spray pattern and volume adjuster for precise application control.
- 360° Valve: Allows the product to spray effectively even when the can is held upside-down.
- Rust Penetration: Quickly breaks free rusted or frozen parts.
- الحماية من التآكل: Protects against further rust and weathering.
- Capillary Action: Attacks rust from all angles using unique capillary action.
- استخدامات متعددة: Suitable for automotive, industrial, marine, and plumbing equipment.
معلومات السلامة
خطر:
- قابل للاشتعال.
- VAPOR HARMFUL. EXCESSIVE INHALATION MAY BE FATAL.
- MAY CAUSE EYE AND SKIN IRRITATION.
- MAY BE HARMFUL OR FATAL IF SWALLOWED.
- محتويات تحت الضغط.
Always read and follow all cautions and instructions on the product label before use. Use in a well-ventilated area. Keep out of reach of children. Wear appropriate personal protective equipment, including eye protection and gloves.
الإعداد والتحضير
- اقرأ التعليمات: Carefully read all instructions and safety warnings on the product label and in this manual before use.
- تهوية: Ensure the work area is well-ventilated. If working indoors, open windows and doors or use exhaust fans.
- معدات الحماية الشخصية (PPE): Wear safety glasses or goggles to protect eyes from splashes and vapors. Wear chemical-resistant gloves to protect skin.
- إعداد السطح: For best results, clean the area around the rusted or frozen part of any loose dirt or debris.
- علبة رج: Shake the can thoroughly for several seconds before each use to ensure proper mixing of the contents.
- Attach ProStraw: Insert the ProStraw into the nozzle for precise application, or use the wide spray pattern directly from the nozzle for broader coverage.
تعليمات التشغيل
- التطبيق المستهدف: Direct the spray nozzle or ProStraw directly onto the rusted or frozen component.
- Apply Liberally: Apply a generous amount of B'laster Penetrating Catalyst to the affected area, ensuring it saturates the rust and penetrates into threads or joints.
- السماح بالاختراق: Allow the product to penetrate for several minutes. For heavily rusted parts, allow more time, such as 15-30 minutes, or even overnight for extreme cases. The unique capillary action helps the product seep into tight spaces.
- Reapply if Necessary: For stubborn parts, reapply the product and allow additional penetration time.
- Attempt to Loosen: After sufficient penetration time, attempt to loosen the part using appropriate tools. Apply steady, increasinضغط جرام.
- تنظيف: Wipe away any excess product with a clean cloth.
نصائح للحصول على أفضل النتائج:
- For extremely seized parts, tapping the part gently with a hammer after application can help the penetrant work deeper.
- The 360° valve allows for spraying from any angle, including upside-down, which is useful in confined or awkward spaces.
- Use the volume adjuster on the ProStraw to control the flow for either a fine stream or a broader spray.
الصيانة والتخزين
- العناية بالفوهة: After use, if the nozzle becomes clogged, remove it and clean with a thin wire or solvent. Reattach securely.
- تخزين: Store the can in a cool, dry place away from direct sunlight, heat sources, and open flames.
- درجة حرارة: Do not expose to temperatures exceeding 120°F (49°C).
- يحفظ بعيدا عن متناول الأطفال: Store in an area inaccessible to children and pets.
- تصرف: تخلص من العلب الفارغة وفقًا للوائح المحلية. لا تقم بثقبها أو حرقها.
استكشاف الأخطاء وإصلاحها
| مشكلة | السبب المحتمل | حل |
|---|---|---|
| Part does not loosen after application. | Severe rust/corrosion; insufficient penetration time; improper application. | Reapply product liberally and allow significantly more penetration time (e.g., several hours or overnight). Gently tap the part to aid penetration. Consider using heat if safe and appropriate for the material. |
| Nozzle is clogged or spray is weak. | Dried product in nozzle; straw not properly attached. | Remove and clean the nozzle with a thin wire or solvent. Ensure the ProStraw is fully inserted and not bent. Shake the can well before use. |
| Product leaks from nozzle area. | Nozzle not securely attached; damaged nozzle. | Ensure the nozzle is firmly pressed onto the valve stem. If damaged, replace the can or contact customer support. |
تحديد
| يصف | التفاصيل |
|---|---|
| رقم الموديل | 16-PB-DS |
| ماركة | مسدس |
| أبعاد المنتج | 8.25 x 12 x 8.5 inches (packaging for pack of 12) |
| حجم السائل | 11 ounces per can |
| وزن العنصر | 14.4 ounces per can |
| مادة | Metal (can) |
| الشركة المصنعة | Blaster Corporation |
| تاريخ أول توفر | 7 سبتمبر 2020 |
الضمان والدعم
For specific warranty information or technical support regarding your B'laster product, please refer to the official B'laster webالموقع أو اتصل بخدمة العملاء الخاصة بهم مباشرة.
الشركة المصنعة: Blaster Corporation
Webموقع: www.blasterproducts.com (This is a general link, specific product support might be found there)
Always ensure you are using genuine B'laster products for optimal performance and safety.
